期刊文献+
共找到1,293篇文章
< 1 2 65 >
每页显示 20 50 100
吸波材料吸波性能的计算及其优化设计 被引量:21
1
作者 邹田春 赵乃勤 +1 位作者 师春生 李家俊 《功能材料》 EI CAS CSCD 北大核心 2005年第7期988-991,995,共5页
吸波材料是现代武器系统隐身技术的关键材料,随着近年来隐身技术的迅猛发展,吸波材料的研究已经受到世界各国的高度重视。本文较详细地阐述了目前常用的涂覆型吸波材料和结构型吸波材料吸波性能的基本计算方法,并且对吸波材料的优化设... 吸波材料是现代武器系统隐身技术的关键材料,随着近年来隐身技术的迅猛发展,吸波材料的研究已经受到世界各国的高度重视。本文较详细地阐述了目前常用的涂覆型吸波材料和结构型吸波材料吸波性能的基本计算方法,并且对吸波材料的优化设计进行了简要的介绍。 展开更多
关键词 吸波材料 吸波性能 优化设计
下载PDF
国外兵器遥测技术的发展现状及国内兵器遥测技术发展的需求 被引量:10
2
作者 黄峥 《探测与控制学报》 CSCD 2000年第1期3-5,25,共4页
介绍了 90年代以来欧美遥测系统发展现状 ;论述了国内兵器遥测技术发展的需求 ;提出了多学科的结合将是遥测技术发展的特征。
关键词 兵器遥测技术 多目标 多传感器融合技术
下载PDF
基于适应高原环境的武器装备防护包装设计方法探讨 被引量:9
3
作者 蔡建 胡秉飞 赵耀辉 《包装工程》 CAS CSCD 北大核心 2009年第10期54-58,共5页
针对典型高原环境特点及其对武器装备的影响,从设计技术要求确定、总体方案选用、功能特性设计和试验设计验证等方面探讨了如何设计适用、可靠的多功能综合防护包装,以提高武器装备的高原环境适应性。
关键词 高原环境 武器装备 环境适应性 防护包装设计
下载PDF
爆炸冲击震动模拟平台的研制 被引量:8
4
作者 卢红标 周早生 +2 位作者 严东晋 戴佑斌 贺虎成 《爆炸与冲击》 EI CAS CSCD 北大核心 2005年第3期276-280,共5页
为了模拟核爆、化爆冲击震动环境,根据能量守恒和弹性碰撞原理,研制了悬挂式爆炸冲击震动模拟平台.该平台能够完成水平向和垂直向冲击试验,通过对锤重、锤高和垫层厚度等参数的合理选择,性能指标可达到:水平向冲击加速度峰值5~1 500m/... 为了模拟核爆、化爆冲击震动环境,根据能量守恒和弹性碰撞原理,研制了悬挂式爆炸冲击震动模拟平台.该平台能够完成水平向和垂直向冲击试验,通过对锤重、锤高和垫层厚度等参数的合理选择,性能指标可达到:水平向冲击加速度峰值5~1 500m/s2,作用时间50~4ms;垂直向冲击加速度峰值10~1000m/s2,作用时间60~4ms.性能试验表明,该平台能够为防护工程结构抗震及其他有关冲击振动问题的研究提供安全、方便、经济、可靠的试验手段. 展开更多
关键词 爆炸力学 模拟试验装置 冲击振动 爆炸震动
下载PDF
抗战期间国民政府对八路军的军械补充 被引量:5
5
作者 崔军锋 杨丽平 《南华大学学报(社会科学版)》 2015年第6期59-67,共9页
文章主要探讨抗战中国共第二次合作开始后,南京国民政府对八路军的军械补充问题。按照双方当初达成的协议,八路军作为国民革命军作战序列,其待遇应与其他国民党军相同,但实际上除了编制内的军饷和被服外,国民政府极少给八路军补充武器,... 文章主要探讨抗战中国共第二次合作开始后,南京国民政府对八路军的军械补充问题。按照双方当初达成的协议,八路军作为国民革命军作战序列,其待遇应与其他国民党军相同,但实际上除了编制内的军饷和被服外,国民政府极少给八路军补充武器,仅给予必要的弹药。随着八路军的发展,蒋介石更担心其势力尾大不掉,1940年前即停止对八路军的武器弹药补充,不久又停发了八路军的医疗等物资和军费。虽然国民政府对八路军的军械补充较少,也不积极,但这些军械装备对抗战初期的八路军还是起到了一定的帮助。探究抗战期间南京国民政府对八路军的军械补充问题,可以作为考察国共第二次合作的一个独特视角。同时,探究此一问题,也可借此明了共产党是怎样在抗战艰难的情况下一步步壮大,最后取得新民主主义革命胜利的。对抗战史的研究必须坚持正确历史观的指导,必须要用历史说话,用史实发言。 展开更多
关键词 国民政府 八路军 抗战 军械
下载PDF
WQ-1蜡膜薄层防锈油的研制 被引量:4
6
作者 谭胜 闫鹏程 +1 位作者 文颀 刘冬青 《军械工程学院学报》 2008年第4期36-38,共3页
介绍了WQ-1蜡膜薄层防锈油的研制过程、配方、制备工艺和性能等情况。实验室理化性能测定和实际使用结果表明,该油具有油膜薄、防锈性好、耐水冲洗、抗划伤和不油腻、不粘手等特点,是一种综合性能优良的武器防护材料。
关键词 防锈油 配方 性能 枪械
下载PDF
Weight distribution of sub-munitions fuze design 被引量:3
7
作者 秦栋泽 范宁军 《Journal of Beijing Institute of Technology》 EI CAS 2013年第2期153-157,共5页
In order to explore the unexploded ordnance problem of cluster munitions and find the so- lutions, an M85 sub-munitions reliability model was established by applying the Monte Carlo method. Simulation and experimental... In order to explore the unexploded ordnance problem of cluster munitions and find the so- lutions, an M85 sub-munitions reliability model was established by applying the Monte Carlo method. Simulation and experimental statistics matched the proportion of unexploded ordnance, so the hy- pothesis was feasible. The causes of failure and influencing factors of the dual-purpose improved conventional munitions M85 were analyzed according to experimental data. The sensitivity of each device in fuze was also analyzed. The sorting of weight of each device influence in M85 sub-muni- tions fuze was determined. Stabilization device with the maximum weight is the key components of sub-munitions fuze, so these results provide a reference to the analysis and redesign of other sub- munitions fuzes. 展开更多
关键词 unexploded ordnance fuzes RELIABILITY WEIGHTS
下载PDF
汉代军械勤务考述——以西北考古资料为中心 被引量:3
8
作者 刘军 《中国国家博物馆馆刊》 CSSCI 北大核心 2012年第7期42-48,共7页
汉代为巩固统治建立了较为完整的军械勤务体系,重点加强军械生产、储备和维护三个环节。各部门间协同配合,形成严密的运作流程。严谨务实的军械勤务工作,为汉朝取得军事斗争的胜利奠定了坚实的物质和技术基础。汉朝统治者通过权力制衡机... 汉代为巩固统治建立了较为完整的军械勤务体系,重点加强军械生产、储备和维护三个环节。各部门间协同配合,形成严密的运作流程。严谨务实的军械勤务工作,为汉朝取得军事斗争的胜利奠定了坚实的物质和技术基础。汉朝统治者通过权力制衡机制,确保军械勤务工作的正常开展。西北考古资料的大量发现,为认识这个问题提供了新的契机。 展开更多
关键词 汉代 军械 后勤
原文传递
多功能通用润滑脂的研制 被引量:3
9
作者 陈学军 谭胜 +1 位作者 梅凤德 刘庆廉 《河北化工》 2002年第2期37-38,40,共3页
介绍了多功能通用润滑脂的研究过程及性能。实验室理化性能测定和实际使用结果表明 ,该脂主要性能达到了美军标MIL -G -10924F的质量标准 ,可以满足火炮。
关键词 多功能通用润滑脂 研制 质量标准 军械装备 使用 性能
下载PDF
Review and Analysis: United States Cluster Munitions and Unexploded Ordnance Left in Laos after the Second Indochina War
10
作者 Kenneth R. Olson 《Open Journal of Soil Science》 2023年第8期355-369,共15页
Cluster munitions release dozens of smaller bomblets that rain deadly ammunition on armored tanks, vegetation and troops, effectively striking broad areas of war zone landscapes in one launch. However, only about 60% ... Cluster munitions release dozens of smaller bomblets that rain deadly ammunition on armored tanks, vegetation and troops, effectively striking broad areas of war zone landscapes in one launch. However, only about 60% of bomblets detonate immediately and those that fail to detonate fall to the ground and can lie dormant for years. The legacy of cluster munitions in Laos from the Second Indochina War is unexploded bomblets across the landscape that unexpectedly detonate years later, injuring and killing children, farmers, and other civilians long after the war is over. In Laos, the United States (US) military operation against the Ho Chi Minh Trail, a network of foot and bicycle paths, waterways, and truck routes along the Laos, Cambodia and Vietnam borders linking North and South Vietnam began in 1959. By the 1960s, as the war escalated, trail traffic was interdicted frequently by CIA and US Air Force using tactical herbicide spraying to defoliate dense vegetation and bombing to disrupt supplies and North Vietnamese troops dispersed along the 16,000-kilometer trail. Unexploded ordinance (UXO), including cluster munitions, from U.S. bombings continued in recent years to detonate, kill, maim and injure Laotians and render agricultural lands too hazardous to cultivate. The primary objectives of this study are to document: 1) the long-term consequences and impacts of the US Air Force bombing of Laos during the Second Indochina War (1959 to 1973);2) the United States removal of unexploded ordnance and cluster munitions;and 3) worldwide relief efforts to help the Laotians maimed by unexploded ordnance and cluster munitions. 展开更多
关键词 Cluster Munitions ordnance BOMBS Laos Cluster bomblets US Air Force Air America
下载PDF
An inexpensive underwater mine countermeasures simulator with real-time 3D after action review 被引量:1
11
作者 Robert STONE Timothy SNELL Neil COOKE 《Defence Technology(防务技术)》 SCIE EI CAS CSCD 2016年第5期367-379,共13页
This paper presents the results of a concept capability demonstration pilot study, the aim of which was to investigate how inexpensive gaming software and hardware technologies could be exploited in the development an... This paper presents the results of a concept capability demonstration pilot study, the aim of which was to investigate how inexpensive gaming software and hardware technologies could be exploited in the development and evaluation of a simulator prototype for training Royal Navy mine clearance divers, specifically focusing on the detection and accurate reporting of the location and condition of underwater ordnance. The simulator was constructed using the Blender open source 3D modelling toolkit and game engine, and featured not only an interactive 3D editor for underwater scenario generation by instructors, but also a real-time, 3D After Action Review(AAR) system for formative assessment and feedback.The simulated scenarios and AAR architecture were based on early human factors observations and briefings conducted at the UK's Defence Diving School(DDS), an organisation that provides basic military diving training for all Royal Navy and Army(Royal Engineers) divers. An experimental pilot study was undertaken to determine whether or not basic navigational and mine detection components of diver performance could be improved as a result of exposing participants to the AAR system, delivered between simulated diving scenarios. The results suggest that the provision of AAR was accompanied by significant performance improvements in the positive identification of simulated underwater ordnance(in contrast to non-ordnance objects) and on participants' description of their location, their immediate in-water or seabed context and their structural condition. Only marginal improvements were found with participants' navigational performance in terms of their deviation accuracies from a pre-programmed expert search path. Overall, this project contributes to the growing corpus of evidence supporting the development of simulators that demonstrate the value of exploiting open source gaming software and the significance of adopting established games design techniques in delivering highly engaging scenarios to defence training communit 展开更多
关键词 Simulation Virtual reality Diver training ordnance disposal Mine clearance
下载PDF
Research on the Properties of a Surface-Type Infrared Decoy and Effect of Multiple Launching 被引量:1
12
作者 Zhengwei Wang Huijun Ning +2 位作者 Jinlong Wang Hao Wang Cheng Zhang 《Journal of Harbin Institute of Technology(New Series)》 EI CAS 2017年第2期72-79,共8页
To study the properties of a new surface-type infrared decoy,the numerical dispersion model and the infrared radiance model of the plates are established. In addition,the temperature of a single plate was measured dur... To study the properties of a new surface-type infrared decoy,the numerical dispersion model and the infrared radiance model of the plates are established. In addition,the temperature of a single plate was measured during combustion experiment,and the spatial position and infrared radiance of each plate are calculated in plate cloud by the two models respectively. Furthermore,the radar images of the plate cloud are simulated and analyzed in dependence of time and direction for single and multiple launching. The result shows that the surface-type infrared decoy can be a point source of interference when the missile is remote tracking. In the meanwhile,the plates cloud shelters the infrared characteristics of the plume and jets of aircraft when the missile is on IR imaging guidance mode. Moreover,With the analysis of the plate cloud dispersion at different intervals and the infrared radiation intensity in the case of different launching number,it can be concluded that a comfortable launching interval can maintain a continuous plate cloud,launching the decoys simultaneously increase the increment of the radiation intensity obviously,the multiple launching is an effective way to enhance the interference property of the decoy. 展开更多
关键词 ordnance science and technology surface-type infrared decoy radiation intensity multiple launching
下载PDF
应急任务时基于PPSVM的应急军械物资分级研究 被引量:2
13
作者 李元 谢小秋 谢永亮 《舰船电子工程》 2014年第9期123-125,共3页
介绍了应急军械物资分级模型,分析了PPSVM在应急军械物资分级上的应用,阐述了应急任务时基于PPSVM的应急军械物资分级的应用与发展趋势。实验结果表明,PPSVM用于应急军械物资分级是可行的,能够很好地解决应急军械物资的分级问题。
关键词 PPSVM 军械 应急任务 分级
下载PDF
金属粉末注射成形技术在现代兵器工业中的应用 被引量:2
14
作者 张驰 徐博 +1 位作者 吴紫光 邱恺 《重庆工学院学报》 2007年第13期21-24,161,共5页
由于金属粉末注射成形技术(MIM)在技术、经济效益上的优越性,在现代兵器工业中得到了广泛的应用.概述了金属粉末注射成形的工艺过程和技术特点,并介绍了金属粉末注射成形技术在兵器零部件制造中的应用及其发展前景.
关键词 粉末 注射成形 近净成形 兵器
下载PDF
军用包装技术的发展对军事物流的影响 被引量:2
15
作者 刘晖 曾雁 《包装工程》 CAS CSCD 北大核心 2009年第10期32-33,70,共3页
主要阐述了新型包装技术特点及其应用,对军用包装技术在现代军事物流中的作用进行了深入探讨,为加快我军军事物流现代化建设提出了新的思路。
关键词 包装 军事物流 武器装备
下载PDF
Validity of a noninvasive estimation of deep body temperature when wearing personal protective equipment during exercise and recovery
16
作者 Andrew P.Hunt Mark J.Buller +2 位作者 Matthew J.Maley Joseph T.Costello Ian B.Stewart 《Military Medical Research》 SCIE CAS CSCD 2019年第4期328-339,共12页
Background:Deep body temperature is a critical indicator of heat strain.However,direct measures are often invasive,costly,and difficult to implement in the field.This study assessed the agreement between deep body tem... Background:Deep body temperature is a critical indicator of heat strain.However,direct measures are often invasive,costly,and difficult to implement in the field.This study assessed the agreement between deep body temperature estimated from heart rate and that measured directly during repeated work bouts while wearing explosive ordnance disposal(EOD)protective clothing and during recovery.Methods:Eight males completed three work and recovery periods across two separate days.Work consisted of treadmill walking on a 1%incline at 2.5,4.0,or 5.5 km/h,in a random order,wearing EOD protective clothing.Ambient temperature and relative humidity were maintained at 24℃and 50%[Wet bulb globe temperature(WBGT)(20.9±1.2)℃]or 32℃and 60%[WBGT(29.0±0.2)℃]on the separate days,respectively.Heart rate and gastrointestinal temperature(TGI)were monitored continuously,and deep body temperature was also estimated from heart rate(ECTemp).Results:The overall systematic bias between TGI and ECTemp was 0.01℃with 95%limits of agreement(Lo A)of±0.64℃and a root mean square error of 0.32℃.The average error statistics among participants showed no significant differences in error between the exercise and recovery periods or the environmental conditions.At TGI levels of(37.0–37.5)℃,(37.5–38.0)℃,(38.0–38.5)℃,and>38.5℃,the systematic bias and±95%Lo A were(0.08±0.58)℃,(–0.02±0.69)℃,(–0.07±0.63)℃,and(–0.32±0.56)℃,respectively.Conclusions:The findings demonstrate acceptable validity of the ECTemp up to 38.5℃.Conducting work within an ECTemp limit of 38.4℃,in conditions similar to the present study,would protect the majority of personnel from an excessive elevation in deep body temperature(>39.0℃). 展开更多
关键词 Protective CLOTHING Body core temperature HEAT strain HEAT stress KALMAN filter Explosive ordnance disposal
下载PDF
Methods of Classification of Ordnance Materials Military-Civilian Joint Support Categories Based on Multiple Attribute Decision
17
作者 高铁路 张桦 高崎 《Journal of Donghua University(English Edition)》 EI CAS 2016年第2期272-276,共5页
Ordnance material is the physical basis of ordnance equipment maintenance and support. With the increase of technology content and the enhancement of structural complexity of ordnance equipment,the traditional way of ... Ordnance material is the physical basis of ordnance equipment maintenance and support. With the increase of technology content and the enhancement of structural complexity of ordnance equipment,the traditional way of military self-independent support is unable to meet the troops' requirements. It has become an inevitable trend to integrate ordnance materials with the militarycivilian joint support. However, there is a problem demanding prompt solution,that is,to distinguish the categories of ordnance material that can be supported by civilian source. Based on the inherent properties of ordnance material, a method to classify ordnance materials military-civilian joint support categories based on multiple attribute decision was proposed. The effectiveness was validated through practical cases. 展开更多
关键词 ordnance material military-civilian joint support multiple attribute decision category classification
下载PDF
兵器装备产品防护包装标准体系探析 被引量:1
18
作者 赵耀辉 蔡建 +1 位作者 黎明 张学金 《包装工程》 CAS CSCD 北大核心 2011年第23期73-76,125,共5页
给出了兵器产品防护包装标准体系结构框图,列出了指导兵器产品包装的3个层次的标准和规范(S&S),即管理和协调层次、技术基础层次和产品包装规范层次,并对列出顶层管理层次的标准和规范的理由进行了说明。指出了中间层次,即技术基础... 给出了兵器产品防护包装标准体系结构框图,列出了指导兵器产品包装的3个层次的标准和规范(S&S),即管理和协调层次、技术基础层次和产品包装规范层次,并对列出顶层管理层次的标准和规范的理由进行了说明。指出了中间层次,即技术基础层次的某些标准需要修订,另有一些新的标准需要制订。为实现兵器产品防护包装标准化,将兵器产品划分为9个类别。每个类别中的产品均要求按其作战使用特征提出系列化的包装方案,以便按一定的防护级别进行包装,并组合成单元货载。 展开更多
关键词 兵器产品 防护包装 包装标准化
下载PDF
美国海军军械缺陷报告系统建设分析 被引量:1
19
作者 冯玉光 唐金国 唐嘉钰 《计算机与现代化》 2017年第4期52-55,72,共5页
在介绍美军械缺陷报告法规的基础上,重点对美国海军军械缺陷报告类型、管理信息系统以及缺陷报告流程和时限进行分析,以期对我海军军械装备质量建设有所启发和借鉴。
关键词 美国海军 军械 产品质量 缺陷报告
下载PDF
敏捷供弹系统虚拟样机技术 被引量:1
20
作者 罗阿妮 刘贺平 +2 位作者 吕金丽 胡胜海 张家泰 《哈尔滨工程大学学报》 EI CAS CSCD 北大核心 2007年第1期81-86,共6页
提出一套完整的大中口径舰炮敏捷供弹系统.应用三维实体建模软件PRO/E完成了整个供弹系统各个子系统的模型设计及建立;进行了装配检查,排除了零部件之间的干涉,完善了零部件设计;再利用PRO/E和ADAMS相结合,建立供弹系统各部分的驱动系统... 提出一套完整的大中口径舰炮敏捷供弹系统.应用三维实体建模软件PRO/E完成了整个供弹系统各个子系统的模型设计及建立;进行了装配检查,排除了零部件之间的干涉,完善了零部件设计;再利用PRO/E和ADAMS相结合,建立供弹系统各部分的驱动系统,并与实体模型结合,对此系统进行机构的运动学、动力学和驱动系统仿真,对设计的可行性和合理性进行进一步检验.建立了一个完整的大中口径舰炮敏捷供弹系统虚拟样机,为供弹系统的进一步深入研究以及实际生产提供了坚实的基础;同时给军械设计研发提供了一条高效率、低成本的方法. 展开更多
关键词 舰炮 供弹系统 虚拟样机
下载PDF
上一页 1 2 65 下一页 到第
使用帮助 返回顶部