期刊文献+
共找到4篇文章
< 1 >
每页显示 20 50 100
增材制造技术中的流固耦合度影响因素 被引量:3
1
作者 张阔 《工业技术创新》 2021年第1期40-53,共14页
对流固界面的耦合程度为增材制造技术带来的挑战进行报道。以流体柱体外围绕无限远各向同性固体模型为基准,在角频率—波数域建立流体满足的声波方程、固体满足的弹性波方程和流固耦合边界条件。引入流固耦合度这一概念,导出法向位移断... 对流固界面的耦合程度为增材制造技术带来的挑战进行报道。以流体柱体外围绕无限远各向同性固体模型为基准,在角频率—波数域建立流体满足的声波方程、固体满足的弹性波方程和流固耦合边界条件。引入流固耦合度这一概念,导出法向位移断续、法向应力断续、切向应力为零的流固界面不完全耦合边界条件,考察不同中心频率的单极子声源在模型中激发的频散特征和波形特征。流体柱体与硬性固体相耦合,降低了各阶模式的截止频率,压制了各阶模式的传播速度,法向位移耦合度或法向应力耦合度的增大,分别使得各阶模式更加远离或靠近流体柱体外围不存在硬性固体的情形;流体柱体与软性固体相耦合,频散波仅存在一个具有较低截止频率的0阶模式,法向位移耦合度或法向应力耦合度的减小,均使得0阶模式更加远离流体柱体外围不存在软性固体的情形,且截止频率持续降低直至消失,甚至可能导致0阶模式发生反转。法向应力耦合度为零时的复杂波串并非频散曲线中的某阶模式,而是某种其他非频散波。留存于流体柱体内的"滞能纵波"和近乎于流体柱体外围绕横向各向同性固体时的传播特性,是流体柱体与软性固体相耦合时产生的特殊数学物理现象。 展开更多
关键词 增材制造 流固耦合度 角频率—波数域 流固界面不完全耦合边界条件 单极子声源 频散特征 截止频率 0阶模式 反转 非频散波 “滞能纵波” 横向各向同性
原文传递
Portable Analyzer for Rapid Analysis of Total Protein, Fat and Lactose Contents in Raw Milk Measured by Non-dispersive Short-wave Near-infrared Spectrometry 被引量:6
2
作者 FENG Xu-dong SU Rui XU Nan WANG Xing-hua YU Ai-min ZHANG Han-qi CAO Yan-bo 《Chemical Research in Chinese Universities》 SCIE CAS CSCD 2013年第1期15-19,共5页
A novel portable analyzer for raw milk quality control during the material purchase at dairy plants was developed, by which the percentages(mass fraction) of main components including total protein, fat, and lactose... A novel portable analyzer for raw milk quality control during the material purchase at dairy plants was developed, by which the percentages(mass fraction) of main components including total protein, fat, and lactose of an unhomogenized milk sample could be determinated in 1 min with the help of non-dispersive short-wave near-infrared (NDSWNIR) spectrometry in a wavelength range from 600 nm to 1100 nm and multivariate calibration. The analyzer was designed with a single-beam optical system, which comprised a temperature control module, a multi-channel narrow-band light source(16 wavelengths), a glass absorption cell with 15 mm sample thickness, a silicon photodiode detector, several compound lenses and a recorder module. A total of 80 raw milk samples were collected at a dairy farm twice a month for 4 months. The samples were scanned with a common UV-Vis-NIR spectrometer and analyzed according to China GB standard methods. The uninformative variables elimination(UVE) method was carried out on the spectrum data and the percentages of main components of all the samples to choose the peak emitting wavelength of each channel of the light source. Another 90 raw milk samples were collected from the same dairy farm thrice a month for 3 months. The samples were analyzed according to China GB standard methods and with the proposed analyzer. The percentages of the main components and the NDSWNIR absorption data of the samples were used for the construction and validation of the multivariate calibration model with partial least squares(PLS) method. The root-mean-square errors of prediction(RMSEP) of total protein, fat and lactose were 0.201, 0.172 and 0.247 and the coefficients of correlation(R) were 0.932, 0.981 and 0.933, respectively. 展开更多
关键词 Portable analyzer Raw milk non-dispersive short-wave near-infrared(NDSWNIR) spectrometry Multiva-riate calibration
原文传递
重力式码头水下抛石体加固技术及检测研究 被引量:6
3
作者 刘红军 单红仙 +1 位作者 郑建国 薛新华 《岩土工程学报》 EI CAS CSCD 北大核心 2004年第3期344-348,共5页
介绍了采用水下不分散水泥砂浆对码头水下抛石体进行高压注浆加固的方法。为了检测高压注浆加固效果 ,采用探地雷达、弹性波CT无损检测方法 ,配合所取岩芯的波速测试及点荷载强度试验 ,对码头水下高压注浆效果进行综合检测。研究结果表... 介绍了采用水下不分散水泥砂浆对码头水下抛石体进行高压注浆加固的方法。为了检测高压注浆加固效果 ,采用探地雷达、弹性波CT无损检测方法 ,配合所取岩芯的波速测试及点荷载强度试验 ,对码头水下高压注浆效果进行综合检测。研究结果表明 ,采用一定配合比及加有一定量的水下不分散剂的水泥砂浆加固水下抛石体 ,方法可靠、效果良好。弹性波CT、探地雷达用于水下高压注浆加固效果检测 ,检测结果直观、可靠 ,可用于其它用途的高压注浆效果检测。 展开更多
关键词 重力式码头 水下抛石体 弹性波CT 无损检测 探地雷达
下载PDF
声波全波列测井中类瑞利波速度及幅度的讨论
4
作者 边瑞雪 《石油仪器》 1997年第1期12-13,61,共2页
文章从理论模型出发 ,就声波测井中记录到的类瑞利波的速度及幅度进行了讨论。结果表明 ,其速度和幅度不仅与井壁地层的声学性质有关 ,还与井眼流体的声学性质有关。
关键词 声波测井 波数 传输系数 类瑞利波
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部