The corrosion behavior of pure Ni and of binary Ni-Y alloys containing 1wt%,3wt%,5wt% Y,respectively,was investigated in air and in the eutectic (0.62Li,0.38K)2CO3 mixture at 650 ℃.The alloys are two-phase composed ...The corrosion behavior of pure Ni and of binary Ni-Y alloys containing 1wt%,3wt%,5wt% Y,respectively,was investigated in air and in the eutectic (0.62Li,0.38K)2CO3 mixture at 650 ℃.The alloys are two-phase composed of γ-Ni solid solution and intermetallic compound Ni17Y2.The experimental results indicated that the corrosion of Ni-Y alloys in air and in molten salts,respectively,produced an external NiO scale with a small amount of Y2O3 and an internal oxidation region composed of Ni and Y2O3 resulting from the oxidation of the intermetallic phase Ni17Y2.The presence of yttrium in the alloy had a positive effect on the lithiation reaction of NiO during immersion in the melt.展开更多
In this work,as-cast Mg-Ni-Y alloys were proposed to develop a feasible material for fracturing balls,and their mechanical performance and corrosion behavior were systematically investigated.Long period stacking order...In this work,as-cast Mg-Ni-Y alloys were proposed to develop a feasible material for fracturing balls,and their mechanical performance and corrosion behavior were systematically investigated.Long period stacking order(LPSO)phase was firstly introduced to improve both the mechanical properties and degradation rate of magnesium alloys.With the increase of LPSO phase,the compressive strength was improved significantly,while the elongation of the alloys decreased owing to the relatively brittle nature of LPSO phase.Due to the higher corrosion potential of LPSO phase,the LPSO phase can accelerate the corrosion process by providing more micro-couples.However,the LPSO phase would serve as the corrosion barrier between the corrosion medium and the matrix when the contents of LPSO phase are too high in Mg92.5Ni3Y4.5 and Mg87.5Ni5Y7.5 alloys.As-cast Mg97.5Ni1Y1.5 alloy with satisfactory mechanical properties and rapid degradation rate was successfully developed,exhibiting a high degradation rate of 6675 mm/a(93℃)in 3 wt.%KCl solution and a favorable ultimate compressive strength of 410 MPa.The degradation rate of Mg97.5Ni1Y1.5 alloy is 2-5 times of the current commercial magnesium alloy fracturing materials.展开更多
This work studied the microstructure,mechanical properties and damping properties of Mg_(95.34)Ni_(2)Y_(2.66) and Mg_(95.34)Zn_(1)Ni_(1)Y_(2.66)alloys systematically.The difference in the evolution of the long-period ...This work studied the microstructure,mechanical properties and damping properties of Mg_(95.34)Ni_(2)Y_(2.66) and Mg_(95.34)Zn_(1)Ni_(1)Y_(2.66)alloys systematically.The difference in the evolution of the long-period stacked ordered(LPSO)phase in the two alloys during heat treatment was the focus.The morphology of the as-cast Mg_(95.34)Ni_(2)Y_(2.66)presented a disordered network.After heat treatment at 773 K for 2 hours,the eutectic phase was integrated into the matrix,and the LPSO phase maintained the 18R structure.As Zn partially replaced Ni,the crystal grains became rounded in the cast alloy,and lamellar LPSO phases and more solid solution atoms were contained in the matrix after heat treatment of the Mg_(95.34)Zn_(1)Ni_(1)Y_(2.66)alloy.Both Zn and the heat treatment had a significant effect on damping.Obvious dislocation internal friction peaks and grain boundary internal friction peaks were found after temperature-dependent damping of the Mg_(95.34)Ni_(2)Y_(2.66)and Mg_(95.34)Zn_(1)Ni_(1)Y_(2.66)alloys.After heat treatment,the dislocation peak was significantly increased,especially in the alloy Mg_(95.34)Ni_(2)Y_(2).66.The annealed Mg_(95.34)Ni_(2)Y_(2.66)alloy with a rod-shaped LPSO phase exhibited a good damping performance of 0.14 atε=10^(−3),which was due to the difference between the second phase and solid solution atom content.These factors also affected the dynamic modulus of the alloy.The results of this study will help in further development of high-damping magnesium alloys.展开更多
The enthalpies of formation of the ternary compounds Al 4NiY, Al 2NiY, Al 2Ni 6Y 3, Al 16 Ni 3Y, AlNiY, Al 3Ni 2Y, AlNi 8Y 3, Al 7Ni 3Y 2, and of the binary compounds Al 2Y containing nickel and Ni 5Y containing alumi...The enthalpies of formation of the ternary compounds Al 4NiY, Al 2NiY, Al 2Ni 6Y 3, Al 16 Ni 3Y, AlNiY, Al 3Ni 2Y, AlNi 8Y 3, Al 7Ni 3Y 2, and of the binary compounds Al 2Y containing nickel and Ni 5Y containing aluminum have been determined by high temperature reaction calorimetry. The enthalpy values measured are compared to previously published results where available as well as extended Miedema model predictions. The melting points of the compounds were determined by DTA and X ray diffraction was used to confirm the crystal structures of the compounds. The enthalpies of formation of the ternary compounds show a maximum along the 50%Al (mole fraction) section. The ternary compounds appear along lines of constant yttrium content consistent with binary compound solubility extensions.展开更多
文摘The corrosion behavior of pure Ni and of binary Ni-Y alloys containing 1wt%,3wt%,5wt% Y,respectively,was investigated in air and in the eutectic (0.62Li,0.38K)2CO3 mixture at 650 ℃.The alloys are two-phase composed of γ-Ni solid solution and intermetallic compound Ni17Y2.The experimental results indicated that the corrosion of Ni-Y alloys in air and in molten salts,respectively,produced an external NiO scale with a small amount of Y2O3 and an internal oxidation region composed of Ni and Y2O3 resulting from the oxidation of the intermetallic phase Ni17Y2.The presence of yttrium in the alloy had a positive effect on the lithiation reaction of NiO during immersion in the melt.
基金This work is financially supported by the National Key Research and Development Program of China(Grant No.2016YFB0301100)the Chongqing Foundation and Advanced Research Project(Grant No.cstc2019jcyj-zdxmX0010)+1 种基金the Natural Science Foundation Commission of China(Grant No.51571044 and 51874062)Fundamental Research Funds for the Central Universities(Grant No.2018CDGFCL0005 and 2019CDXYCL0031).
文摘In this work,as-cast Mg-Ni-Y alloys were proposed to develop a feasible material for fracturing balls,and their mechanical performance and corrosion behavior were systematically investigated.Long period stacking order(LPSO)phase was firstly introduced to improve both the mechanical properties and degradation rate of magnesium alloys.With the increase of LPSO phase,the compressive strength was improved significantly,while the elongation of the alloys decreased owing to the relatively brittle nature of LPSO phase.Due to the higher corrosion potential of LPSO phase,the LPSO phase can accelerate the corrosion process by providing more micro-couples.However,the LPSO phase would serve as the corrosion barrier between the corrosion medium and the matrix when the contents of LPSO phase are too high in Mg92.5Ni3Y4.5 and Mg87.5Ni5Y7.5 alloys.As-cast Mg97.5Ni1Y1.5 alloy with satisfactory mechanical properties and rapid degradation rate was successfully developed,exhibiting a high degradation rate of 6675 mm/a(93℃)in 3 wt.%KCl solution and a favorable ultimate compressive strength of 410 MPa.The degradation rate of Mg97.5Ni1Y1.5 alloy is 2-5 times of the current commercial magnesium alloy fracturing materials.
基金funded by the National Natural Science Foundation of China(Nos.51801189)The Central Guidance on Local Science and Technology Development Fund of Shanxi Province(Nos.YDZJTSX2021A027)+2 种基金The National Natural Science Foundation of China(Nos.51801189)The Science and Technology Major Project of Shanxi Province(No.20191102008,20191102007)The North University of China Youth Academic Leader Project(No.11045505).
文摘This work studied the microstructure,mechanical properties and damping properties of Mg_(95.34)Ni_(2)Y_(2.66) and Mg_(95.34)Zn_(1)Ni_(1)Y_(2.66)alloys systematically.The difference in the evolution of the long-period stacked ordered(LPSO)phase in the two alloys during heat treatment was the focus.The morphology of the as-cast Mg_(95.34)Ni_(2)Y_(2.66)presented a disordered network.After heat treatment at 773 K for 2 hours,the eutectic phase was integrated into the matrix,and the LPSO phase maintained the 18R structure.As Zn partially replaced Ni,the crystal grains became rounded in the cast alloy,and lamellar LPSO phases and more solid solution atoms were contained in the matrix after heat treatment of the Mg_(95.34)Zn_(1)Ni_(1)Y_(2.66)alloy.Both Zn and the heat treatment had a significant effect on damping.Obvious dislocation internal friction peaks and grain boundary internal friction peaks were found after temperature-dependent damping of the Mg_(95.34)Ni_(2)Y_(2.66)and Mg_(95.34)Zn_(1)Ni_(1)Y_(2.66)alloys.After heat treatment,the dislocation peak was significantly increased,especially in the alloy Mg_(95.34)Ni_(2)Y_(2).66.The annealed Mg_(95.34)Ni_(2)Y_(2.66)alloy with a rod-shaped LPSO phase exhibited a good damping performance of 0.14 atε=10^(−3),which was due to the difference between the second phase and solid solution atom content.These factors also affected the dynamic modulus of the alloy.The results of this study will help in further development of high-damping magnesium alloys.
文摘The enthalpies of formation of the ternary compounds Al 4NiY, Al 2NiY, Al 2Ni 6Y 3, Al 16 Ni 3Y, AlNiY, Al 3Ni 2Y, AlNi 8Y 3, Al 7Ni 3Y 2, and of the binary compounds Al 2Y containing nickel and Ni 5Y containing aluminum have been determined by high temperature reaction calorimetry. The enthalpy values measured are compared to previously published results where available as well as extended Miedema model predictions. The melting points of the compounds were determined by DTA and X ray diffraction was used to confirm the crystal structures of the compounds. The enthalpies of formation of the ternary compounds show a maximum along the 50%Al (mole fraction) section. The ternary compounds appear along lines of constant yttrium content consistent with binary compound solubility extensions.
