Magnetic properties of diluted magnetic semiconductors (DMSs), Ni-doped ZnO materials, prepared by sol-gel method were investigated by measuring magnetization as functions of magnetic field. The Ni content affects the...Magnetic properties of diluted magnetic semiconductors (DMSs), Ni-doped ZnO materials, prepared by sol-gel method were investigated by measuring magnetization as functions of magnetic field. The Ni content affects the magnetic properties at low sintered temperature but it has few effects on the magnetic properties at high sintered temperature. The sintered temperature has great effects on the magnetic properties of Ni/ZnO at high original mole ratio of Ni/Zn while it has slight effects on the magnetic properties of Ni/ZnO at low original mole ratio of Ni/Zn whatever low or high sintered temperature.展开更多
The effects of Ni content（0–2.1wt%）on the cast and solid-solution microstructures of Cu-0.4wt%Be alloys were investigated,and the corresponding mechanisms of influence were analyzed.The results show that the amount...The effects of Ni content（0–2.1wt%）on the cast and solid-solution microstructures of Cu-0.4wt%Be alloys were investigated,and the corresponding mechanisms of influence were analyzed.The results show that the amount of precipitated phase increases in the cast alloys with increasing Ni content.When the Ni content is 0.45wt%or 0.98wt%,needle-like Be_（21）Ni_5 phases form in the grains and are mainly distributed in the interdendritic regions.When the Ni content is 1.5wt%or greater,a large number of needle-like precipitates form in the grains and chain-like Be_（21）Ni_5 and Be Ni precipitates form along the grain boundaries.The addition of Ni can substantially refine the cast and solid-solution microstructures of Cu-0.4wt%Be alloys.The hindering effects of both the dissolution of Ni into the matrix and the formation of Be–Ni precipitates on grain-boundary migration are mainly responsible for refining the cast and solid-solution microstructures of Cu-0.4wt%Be alloys.Higher Ni contents result in finer microstructures;however,given the precipitation characteristics of Be–Ni phases and their dissolution into the matrix during the solid-solution treatment,the upper limit of the Ni content is 1.5wt%–2.1wt%.展开更多
基金This work was financially supported by Korea Research Foundation of the Korea Government(MOEHRD)(KRF-2005-210-C00024).
文摘Magnetic properties of diluted magnetic semiconductors (DMSs), Ni-doped ZnO materials, prepared by sol-gel method were investigated by measuring magnetization as functions of magnetic field. The Ni content affects the magnetic properties at low sintered temperature but it has few effects on the magnetic properties at high sintered temperature. The sintered temperature has great effects on the magnetic properties of Ni/ZnO at high original mole ratio of Ni/Zn while it has slight effects on the magnetic properties of Ni/ZnO at low original mole ratio of Ni/Zn whatever low or high sintered temperature.
基金financially supported by the National Key Research and Development Program of China (No.2016YFB0301300)
文摘The effects of Ni content（0–2.1wt%）on the cast and solid-solution microstructures of Cu-0.4wt%Be alloys were investigated,and the corresponding mechanisms of influence were analyzed.The results show that the amount of precipitated phase increases in the cast alloys with increasing Ni content.When the Ni content is 0.45wt%or 0.98wt%,needle-like Be_（21）Ni_5 phases form in the grains and are mainly distributed in the interdendritic regions.When the Ni content is 1.5wt%or greater,a large number of needle-like precipitates form in the grains and chain-like Be_（21）Ni_5 and Be Ni precipitates form along the grain boundaries.The addition of Ni can substantially refine the cast and solid-solution microstructures of Cu-0.4wt%Be alloys.The hindering effects of both the dissolution of Ni into the matrix and the formation of Be–Ni precipitates on grain-boundary migration are mainly responsible for refining the cast and solid-solution microstructures of Cu-0.4wt%Be alloys.Higher Ni contents result in finer microstructures;however,given the precipitation characteristics of Be–Ni phases and their dissolution into the matrix during the solid-solution treatment,the upper limit of the Ni content is 1.5wt%–2.1wt%.
