Fe2O3, TiO2, CuO and ZnO powders were mixed according to the formula of （1-x）TiO2 xCuO-Fe2O3 or （1-x）TiO2 xZnO-Fe2O3 （x=0, 0.2 0.4, 0.6, 0.8, 1）, and well ball-milled with H2O for 3 h to ensure homogeneity of th...Fe2O3, TiO2, CuO and ZnO powders were mixed according to the formula of （1-x）TiO2 xCuO-Fe2O3 or （1-x）TiO2 xZnO-Fe2O3 （x=0, 0.2 0.4, 0.6, 0.8, 1）, and well ball-milled with H2O for 3 h to ensure homogeneity of the powdered solids, then fired at 1200℃ for 4 h. The fired samples were reduced at 500℃ with hydrogen gas. The reduced samples were subjected to recalcination at 500℃ in CO2 atmosphere. Both of fired, reduced and calcined samples were characterized by X-ray diffraction, vibrating sample magnetometry, reflected light microscopy and scanning electron microscopy. Different phases were formed after firing of Cu^＋2 or Zn^2＋ substituted Fe2TiO5. Magnetization （Bs） of the formed phases after firing are very low corresponding to diluted magnetic semiconductors （DMS） and increases with increasing the substituted cations （Cu^＋2 or Zn^2＋）. The reduction of the fired samples enhanced the Bs values whereas the reducibility increases with increasing the Cu^＋2 or Zn^2＋ content. Samples show different tendency toward CO2 decomposition which is very important for environmental minimization for CO2.展开更多
Nanosized Co_(0.5)Zn_(0.5)Fe_(2)O_(4) ferrite was prepared by chemical co-precipitation method.The samples were characterized by X-ray diffraction(XRD),field-emission transmission electron microscopy(FETEM),vibrating ...Nanosized Co_(0.5)Zn_(0.5)Fe_(2)O_(4) ferrite was prepared by chemical co-precipitation method.The samples were characterized by X-ray diffraction(XRD),field-emission transmission electron microscopy(FETEM),vibrating sample magnetometer(VSM)and network analyzer.TEM analysis indicates that the diameter of as-prepared powder is about 20-30 nm.The saturation magnetization of nanosized Co_(0.5)Zn_(0.5)Fe_(2)O_(4) ferrite is 74.01 mA·m^(2)·g^(−1).The complex permittivity and complex permeability of the Co-Zn ferrite were measured by vector network analyzer in the frequency range of 2.0-18.0 GHz,and the reflection loss(RL)was investigated according to the wave transmission theory.The results show that the maximum reflection loss reaches−13.7 dB at 6.8 GHz and the bandwidth of reflection loss less than−10 dB reaches 3.8 GHz.The as-prepared nanosized Co_(0.5)Zn_(0.5)Fe_(2)O_(4) ferrite can be potentially used as an excellent microwave absorber in the C-band.展开更多
Ferrous ion was transformed into feroxyhyte (δ-FeOOH) by oxidation. Then, manganese sulfate and zinc sulfate in some ratio were added to the feroxyhyte solution. The co-precipitation was boiling reflux conditions som...Ferrous ion was transformed into feroxyhyte (δ-FeOOH) by oxidation. Then, manganese sulfate and zinc sulfate in some ratio were added to the feroxyhyte solution. The co-precipitation was boiling reflux conditions sometime under constant stirring. The nanosize MnZn ferrite powder was formed. The mechanism of preparation of the nanosize MnZn ferrite was discussed, and the formation of feroxyhyte which was playing a key role during the process was mentioned. The properties of powder was tested by means of X-ray diffraction, transmission electron microscopy and vibrating sample magnetometer. The results show that the samples of spherical particles about 20 nm, which have characteristics of ferrimagnetism, has larger saturation magnetization, but the remanent magnetization and coercivity are comparatively smaller. The spinel MnZn ferrite nanosize powder was successfully prepared from δ-FeOOH at low temperature, with low-carbon steel and peroxide as main material.展开更多
Nano size nickel copper ferrite powders （NiCuFe204） and nickel copper zinc ferrite powders have been prepared by a citrate gel precursor method. The resulting powders were characterized by X-ray diffraction （XRD） ...Nano size nickel copper ferrite powders （NiCuFe204） and nickel copper zinc ferrite powders have been prepared by a citrate gel precursor method. The resulting powders were characterized by X-ray diffraction （XRD） and scanning electron microscope （SEM）. The results showed that nickel copper ferrites and nickel copper zinc ferrites were also in the nanosaele. The NiCu ferrite powders showed extensive XRD fine broadening and sizes of crystals were calculated （from the XRD line broadening） as 26 run-44 run over the temperature range is 200-800℃. The NiCuZn ferrite powders showed XRD line broadening and sizes of of crystals were calculated 46-65 nm over 200-800℃.展开更多
By using hydrothermal synthesis method, successively adding tetrabutyl titanate and expandable flake graphite in 40 mL 0.95% NH4Cl solution prepared the nano TiO2/expandable flake graphite, which was then settled in m...By using hydrothermal synthesis method, successively adding tetrabutyl titanate and expandable flake graphite in 40 mL 0.95% NH4Cl solution prepared the nano TiO2/expandable flake graphite, which was then settled in muffle furnace in the expansion of 10 s under 800 ℃ and got nanosized TiO2/expanded graphite. Synthesized that with CoFe2O4 by chemical coprecipitation method finally prepared magnetic nanosized photocatalyst TiO2/expanded graphite. Magnetic nanosized TiO2/expanded graphite was studied on the photodegradation performance of methyl orange solution and the magnetic recovery after the degradation of methyl orange solution. The experiment result showed that in 50 mL 25 mg/L methyl orange solution joined 120 mg loading 50% TiO2 of the expanded graphite, exposed to ultraviolet irradiation for 1 h, the methyl orange decolorization ratio was 90%. When the load of CoFe2O4 in nanosized TiO2/expanded graphite reached 40%, its magnetic recovery efficiency reached 94.3%.展开更多
文摘Fe2O3, TiO2, CuO and ZnO powders were mixed according to the formula of （1-x）TiO2 xCuO-Fe2O3 or （1-x）TiO2 xZnO-Fe2O3 （x=0, 0.2 0.4, 0.6, 0.8, 1）, and well ball-milled with H2O for 3 h to ensure homogeneity of the powdered solids, then fired at 1200℃ for 4 h. The fired samples were reduced at 500℃ with hydrogen gas. The reduced samples were subjected to recalcination at 500℃ in CO2 atmosphere. Both of fired, reduced and calcined samples were characterized by X-ray diffraction, vibrating sample magnetometry, reflected light microscopy and scanning electron microscopy. Different phases were formed after firing of Cu^＋2 or Zn^2＋ substituted Fe2TiO5. Magnetization （Bs） of the formed phases after firing are very low corresponding to diluted magnetic semiconductors （DMS） and increases with increasing the substituted cations （Cu^＋2 or Zn^2＋）. The reduction of the fired samples enhanced the Bs values whereas the reducibility increases with increasing the Cu^＋2 or Zn^2＋ content. Samples show different tendency toward CO2 decomposition which is very important for environmental minimization for CO2.
基金financially supported by the National Natural Science Foundation of China(Nos.51402154,51202111)the Natural Science Foundation of Jiangsu Province(No.BK20141000)+1 种基金the Natural Science Foundation of Jiangsu Provincial Universities(No.14KJB430019)the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)。
文摘Nanosized Co_(0.5)Zn_(0.5)Fe_(2)O_(4) ferrite was prepared by chemical co-precipitation method.The samples were characterized by X-ray diffraction(XRD),field-emission transmission electron microscopy(FETEM),vibrating sample magnetometer(VSM)and network analyzer.TEM analysis indicates that the diameter of as-prepared powder is about 20-30 nm.The saturation magnetization of nanosized Co_(0.5)Zn_(0.5)Fe_(2)O_(4) ferrite is 74.01 mA·m^(2)·g^(−1).The complex permittivity and complex permeability of the Co-Zn ferrite were measured by vector network analyzer in the frequency range of 2.0-18.0 GHz,and the reflection loss(RL)was investigated according to the wave transmission theory.The results show that the maximum reflection loss reaches−13.7 dB at 6.8 GHz and the bandwidth of reflection loss less than−10 dB reaches 3.8 GHz.The as-prepared nanosized Co_(0.5)Zn_(0.5)Fe_(2)O_(4) ferrite can be potentially used as an excellent microwave absorber in the C-band.
基金This project was financially supported by Natural Science Foundation of Hebei Province (No.E2005000027) and Natural Science Foundation of Tianjin (No.06YFJMJC02400).
文摘Ferrous ion was transformed into feroxyhyte (δ-FeOOH) by oxidation. Then, manganese sulfate and zinc sulfate in some ratio were added to the feroxyhyte solution. The co-precipitation was boiling reflux conditions sometime under constant stirring. The nanosize MnZn ferrite powder was formed. The mechanism of preparation of the nanosize MnZn ferrite was discussed, and the formation of feroxyhyte which was playing a key role during the process was mentioned. The properties of powder was tested by means of X-ray diffraction, transmission electron microscopy and vibrating sample magnetometer. The results show that the samples of spherical particles about 20 nm, which have characteristics of ferrimagnetism, has larger saturation magnetization, but the remanent magnetization and coercivity are comparatively smaller. The spinel MnZn ferrite nanosize powder was successfully prepared from δ-FeOOH at low temperature, with low-carbon steel and peroxide as main material.
文摘Nano size nickel copper ferrite powders （NiCuFe204） and nickel copper zinc ferrite powders have been prepared by a citrate gel precursor method. The resulting powders were characterized by X-ray diffraction （XRD） and scanning electron microscope （SEM）. The results showed that nickel copper ferrites and nickel copper zinc ferrites were also in the nanosaele. The NiCu ferrite powders showed extensive XRD fine broadening and sizes of crystals were calculated （from the XRD line broadening） as 26 run-44 run over the temperature range is 200-800℃. The NiCuZn ferrite powders showed XRD line broadening and sizes of of crystals were calculated 46-65 nm over 200-800℃.
文摘By using hydrothermal synthesis method, successively adding tetrabutyl titanate and expandable flake graphite in 40 mL 0.95% NH4Cl solution prepared the nano TiO2/expandable flake graphite, which was then settled in muffle furnace in the expansion of 10 s under 800 ℃ and got nanosized TiO2/expanded graphite. Synthesized that with CoFe2O4 by chemical coprecipitation method finally prepared magnetic nanosized photocatalyst TiO2/expanded graphite. Magnetic nanosized TiO2/expanded graphite was studied on the photodegradation performance of methyl orange solution and the magnetic recovery after the degradation of methyl orange solution. The experiment result showed that in 50 mL 25 mg/L methyl orange solution joined 120 mg loading 50% TiO2 of the expanded graphite, exposed to ultraviolet irradiation for 1 h, the methyl orange decolorization ratio was 90%. When the load of CoFe2O4 in nanosized TiO2/expanded graphite reached 40%, its magnetic recovery efficiency reached 94.3%.
