As a typical two-dimensional transition metal dichalcogenide, molybdenum disulfide （MoS2） is considered a potential anode material for sodium-ion batteries （NIBs）, due to its relatively high theoretical capacity ...As a typical two-dimensional transition metal dichalcogenide, molybdenum disulfide （MoS2） is considered a potential anode material for sodium-ion batteries （NIBs）, due to its relatively high theoretical capacity （~ 670 mAh·g--1）. However, the low electrical conductivity of MoS2 and its dramatic volume change during charge/discharge lead to severe capacity degradation and poor cycling stability. In this work, we developed a facile, scalable, and effective synthesis method to embed nanosized MoS2 into a thin film of three-dimensional （3D）-interconnected carbon nanofibers （CNFs）, producing a MoS2/CNFs film. The free-standing MoS2/CNFs thin film can be used as anode for NIBs without additional binders or carbon black. The MoS2/CNFs electrode exhibits a high reversible capacity of 260 mAh·g^-1, with an extremely low capacity loss of 0.05 mAh·g^-1 per cycle after 2,600 cycles at a current density of 1 A·g^-1. This enhanced sodium storage performance is attributed to the synergistic effect and structural advantages achieved by embedding MoS2 in the 3D-interconnected carbon matrix.展开更多
The polyvinylidene fluoride(PVDF)nanofiber web by electrospinning technology has the characteristics of fast response,high sensitivity,wide range of pressure,etc.,and provides new sensitive materials for the sensor te...The polyvinylidene fluoride(PVDF)nanofiber web by electrospinning technology has the characteristics of fast response,high sensitivity,wide range of pressure,etc.,and provides new sensitive materials for the sensor testing the dynamic pressure such as foot pressure during walking.Because of the nanofiber mesh structure,it must be packaged to collect piezoelectric charge and bear strong mechanical behavior before industrial practice.The PVDF nanofiber web is usually packaged by incorporating a pair of flexible electrode as well as the lead of signal output.This present work will introduce the detailed packaging process and technology of PVDF nanofiber web,and three different types of packaging electrode materials(adhesive copper foil tape,indium tin oxide(ITO)thin plate,and adhesive conductive cloth)in previously published literatures are compared by the piezoelectric response of their sensor prototypes to a periodic mechanical activation.The results showed that the surface property of packaging material had a significant effect on the piezoelectric response of sensor by PVDF nanofiber web.For PVDF nanofiber web sensor,therefore,it needed a deep investigation on the specific packaging technology in terms of different working conditions.展开更多
Graphene oxide has been used widely as a starting precursor for applications that cater to the needs of tunable graphene. However, the hydrophilic characteristic limits their application, especially in a hydrophobic c...Graphene oxide has been used widely as a starting precursor for applications that cater to the needs of tunable graphene. However, the hydrophilic characteristic limits their application, especially in a hydrophobic condition. Herein, a novel non-covalent surface modification approach towards graphene oxide was conducted via a UV-induced photo-polymerization technique that involves two major routes; a UV-sensitive initiator embedded via pi-pi interactions on the graphene planar rings, and the polymerization of hydrophobic polymeric chains along the surface. The functionalized graphene oxide successfully achieved the desired hydrophobicity as it displayed the characteristic of being readily dissolved in organic solvent. Upon its addition into a polymeric solution and subjected to an electrospinning process,non-woven random nanofibers embedded with graphene oxide sheets were obtained. The prepared polymeric nanofibers were subjected to two-step thermal treatments that eventually converted the polymeric chains into a carbon-rich conductive structure. A unique morphology was observed upon the addition of the functionalized graphene oxide, whereby the sheets were embedded and intercalated within the carbon nanofibers and formed a continuous structure. This reinforcement effectively enhanced the electrochemical performance of the carbon nanofibers by recording a specific capacitance of up to 140.10 F/g at the current density of 1 A/g, which was approximately three folds more than that of pristine nanofibers.It also retained the capacitance up to 96.2% after 1000 vigorous charge/discharge cycles. This functionalization technique opens up a new pathway in tuning the solubility nature of graphene oxide towards the synthesis of a graphene oxide-reinforced polymeric structure.展开更多
The nanofiber electrodes have been considered as promising candidates for commercial proton exchange membrane fuel cells due to their high catalyst utilization and enhanced mass transport efficiency.However,for the fi...The nanofiber electrodes have been considered as promising candidates for commercial proton exchange membrane fuel cells due to their high catalyst utilization and enhanced mass transport efficiency.However,for the first time our research determined that the nanofiber electrodes were restricted by the poor chemical stability of the polymer carriers.To gain further insight into the durability of nanofiber electrodes,both cyclic voltammetry aging tests and Fenton’s tests were conducted.Similar to previous reports,our research demonstrated that nanofiber electrodes showed remarkable stability in the cyclic voltammetry aging process.However,Fenton’s tests indicated that nanofibers in the electrodes would decompose easily while being attacked by reactive oxygen species such as HO·or HOO·,which greatly limits their practicability and reliability.The different performances under the two tests also demonstrated that the cyclic voltammetry aging protocols,which have been applied extensively,cannot well mirror the real operating conditions of fuel cells.展开更多
基金This work was supported by the National Key Research and Development Program of China （No. 2016YFB0100305）, the National Natural Science Foundation of China （Nos. 21373195 and 51622210）, the Fundamental Research Funds for the Central Universities （No. WK3430000004）, and the Collaborative Innovation Center of Suzhou Nano Science and Technology.
文摘As a typical two-dimensional transition metal dichalcogenide, molybdenum disulfide （MoS2） is considered a potential anode material for sodium-ion batteries （NIBs）, due to its relatively high theoretical capacity （~ 670 mAh·g--1）. However, the low electrical conductivity of MoS2 and its dramatic volume change during charge/discharge lead to severe capacity degradation and poor cycling stability. In this work, we developed a facile, scalable, and effective synthesis method to embed nanosized MoS2 into a thin film of three-dimensional （3D）-interconnected carbon nanofibers （CNFs）, producing a MoS2/CNFs film. The free-standing MoS2/CNFs thin film can be used as anode for NIBs without additional binders or carbon black. The MoS2/CNFs electrode exhibits a high reversible capacity of 260 mAh·g^-1, with an extremely low capacity loss of 0.05 mAh·g^-1 per cycle after 2,600 cycles at a current density of 1 A·g^-1. This enhanced sodium storage performance is attributed to the synergistic effect and structural advantages achieved by embedding MoS2 in the 3D-interconnected carbon matrix.
基金“111 Project”Biomedical Textile Materials Science and Technology,China(No.B07024)National Natural Science Foundation of China(No.51405079)+2 种基金China Postdoctoral Science Foundation(No.2015M570307)the Fundamental Research Funds for the Central Universities,Chinathe Jiangsu Planned Projects for Postdoctoral Research Funds,China
文摘The polyvinylidene fluoride(PVDF)nanofiber web by electrospinning technology has the characteristics of fast response,high sensitivity,wide range of pressure,etc.,and provides new sensitive materials for the sensor testing the dynamic pressure such as foot pressure during walking.Because of the nanofiber mesh structure,it must be packaged to collect piezoelectric charge and bear strong mechanical behavior before industrial practice.The PVDF nanofiber web is usually packaged by incorporating a pair of flexible electrode as well as the lead of signal output.This present work will introduce the detailed packaging process and technology of PVDF nanofiber web,and three different types of packaging electrode materials(adhesive copper foil tape,indium tin oxide(ITO)thin plate,and adhesive conductive cloth)in previously published literatures are compared by the piezoelectric response of their sensor prototypes to a periodic mechanical activation.The results showed that the surface property of packaging material had a significant effect on the piezoelectric response of sensor by PVDF nanofiber web.For PVDF nanofiber web sensor,therefore,it needed a deep investigation on the specific packaging technology in terms of different working conditions.
文摘Graphene oxide has been used widely as a starting precursor for applications that cater to the needs of tunable graphene. However, the hydrophilic characteristic limits their application, especially in a hydrophobic condition. Herein, a novel non-covalent surface modification approach towards graphene oxide was conducted via a UV-induced photo-polymerization technique that involves two major routes; a UV-sensitive initiator embedded via pi-pi interactions on the graphene planar rings, and the polymerization of hydrophobic polymeric chains along the surface. The functionalized graphene oxide successfully achieved the desired hydrophobicity as it displayed the characteristic of being readily dissolved in organic solvent. Upon its addition into a polymeric solution and subjected to an electrospinning process,non-woven random nanofibers embedded with graphene oxide sheets were obtained. The prepared polymeric nanofibers were subjected to two-step thermal treatments that eventually converted the polymeric chains into a carbon-rich conductive structure. A unique morphology was observed upon the addition of the functionalized graphene oxide, whereby the sheets were embedded and intercalated within the carbon nanofibers and formed a continuous structure. This reinforcement effectively enhanced the electrochemical performance of the carbon nanofibers by recording a specific capacitance of up to 140.10 F/g at the current density of 1 A/g, which was approximately three folds more than that of pristine nanofibers.It also retained the capacitance up to 96.2% after 1000 vigorous charge/discharge cycles. This functionalization technique opens up a new pathway in tuning the solubility nature of graphene oxide towards the synthesis of a graphene oxide-reinforced polymeric structure.
基金National Key Point Research and Invention Program of the Thirteenth(Program Nos.2018YFB0105601 and 2017YFB0102801).
文摘The nanofiber electrodes have been considered as promising candidates for commercial proton exchange membrane fuel cells due to their high catalyst utilization and enhanced mass transport efficiency.However,for the first time our research determined that the nanofiber electrodes were restricted by the poor chemical stability of the polymer carriers.To gain further insight into the durability of nanofiber electrodes,both cyclic voltammetry aging tests and Fenton’s tests were conducted.Similar to previous reports,our research demonstrated that nanofiber electrodes showed remarkable stability in the cyclic voltammetry aging process.However,Fenton’s tests indicated that nanofibers in the electrodes would decompose easily while being attacked by reactive oxygen species such as HO·or HOO·,which greatly limits their practicability and reliability.The different performances under the two tests also demonstrated that the cyclic voltammetry aging protocols,which have been applied extensively,cannot well mirror the real operating conditions of fuel cells.
