The design of multiband microstrip rectenna for radio frequency energy harvesting applications is presented in this paper. The designed antenna has good performance in the GSM-900/1800, WiFi and WLAN bands. In additio...The design of multiband microstrip rectenna for radio frequency energy harvesting applications is presented in this paper. The designed antenna has good performance in the GSM-900/1800, WiFi and WLAN bands. In addition, the rectifier circuit is designed at multi resonant frequencies to collect the largest amount of RF ambient power from different RF sources. The developed antenna is matched with the rectifier at four desired frequencies using several rectifier branches to collect the largest of RF power. The proposed rectenna is printed on FR4 substrate with modified ground plane to achieve suitable impedance bandwidth. The proposed antenna consists of elliptical radiating plane with stubs and stepped modified ground plane. The rectenna resonates at quad frequency bands at (GSM 900/1800, WiFi band and WLAN bands) with rectifier power conversion efficiency up to 56.4% at 0 dBm input power using the HSMS-2850 Schottky diode. The efficiency is more enhanced by using SMS-7630-061 Schottky diode which is characterized by a low junction capacitance and a low threshold voltage to achieve higher conversion efficiency up to 71.1% at the same 0 dBm input power for the same resonating frequency band.展开更多
This paper presents a compact multi-band rectifier with an improved impedance matching bandwidth.It uses a combination of–matching network(MN)at Port-1,with a parallel connection of three cell branch MN at Port-2.The...This paper presents a compact multi-band rectifier with an improved impedance matching bandwidth.It uses a combination of–matching network(MN)at Port-1,with a parallel connection of three cell branch MN at Port-2.The proposed impedance matching network(IMN)is adopted to reduce circuit complexity,to improve circuit performance,and power conversion efficiency(PCE)of the rectifier at low input power.The fabricated rectifier prototype operates at 0.92,1.82,2.1,2.46 and 2.65 GHz covering GSM/900,GSM/1800,UMTS2100,and Wi-Fi/2.45–LTE2600.The size of the compact rectifier on the PCB board is 0.13λ_(g)×0.1λ_(g).The fabricated rectifier achieved an RF-to DC(radio frequency direct current)PCE of 31.8%,24%,22.7%,and 15%,and 14.1%for−20 dBm at the five respective measured operating frequencies.The circuit attains a peak RF-to-DC PCE of 82.3%for an input power of 3 dBm at 0.92 GHz.The proposed rectifier realizes an ambient output dc voltage of 454 mV for multi-tone input signals from the two ports.The rectifier drives a bq25504-674 power management module(PMM)to achieve 1.21 V from the two-port connection.The rectifier has the ability to exploit both frequency domain through the multi-band operation with good impedance bandwidth and a spatial domain using dual-port configuration.Hence,it is a potential candidate for various applications in radio frequency energy harvesting(RFEH)system.展开更多
This paper proposed the design of a dual-port rectifier with multifrequency operations.The RF rectifier is achieved using a combination of L-section inductive impedance matching network(IMN)at Port-1 with a multiple s...This paper proposed the design of a dual-port rectifier with multifrequency operations.The RF rectifier is achieved using a combination of L-section inductive impedance matching network(IMN)at Port-1 with a multiple stubs impedance transformer at Port-2.The fabricated prototype can harvest RF signal from GSM/900,GSM/1800,UMTS/2100,Wi-Fi/2.45 and LTE/2600 frequency bands at(0.94,1.80,2.10,2.46,and 2.63 GHz),respectively.The rectifier occupies a small portion of a PCB board at 0.20λg×0.15λg.The proposed circuit realized a measured peak RF-to-dc(radio frequency direct current)power conversion efficiency(PCE)of(21%,22.76%,25.33%,21.57%,and 22.14%)for an input power of−20 dBm.The RF harvester attains a measured peak RF-to-dc PCE of 72.70%and an output dc voltage of 154 mV for an input power of 3 dBm at 2.46 GHz.Measurement of the proposed rectifier in the ambiance gives a peak dc output voltage of 376.1 mV from the five signal tones.Similarly,a low-powered bq25504-674 evaluation module(EVM)is integrated with the rectifier.The module boost and drive the rectifier output dc voltage to 945 mV.The performance of the proposed rectifier in the ambiance environment makes it a suitable module for low-powered RF applications.展开更多
文摘The design of multiband microstrip rectenna for radio frequency energy harvesting applications is presented in this paper. The designed antenna has good performance in the GSM-900/1800, WiFi and WLAN bands. In addition, the rectifier circuit is designed at multi resonant frequencies to collect the largest amount of RF ambient power from different RF sources. The developed antenna is matched with the rectifier at four desired frequencies using several rectifier branches to collect the largest of RF power. The proposed rectenna is printed on FR4 substrate with modified ground plane to achieve suitable impedance bandwidth. The proposed antenna consists of elliptical radiating plane with stubs and stepped modified ground plane. The rectenna resonates at quad frequency bands at (GSM 900/1800, WiFi band and WLAN bands) with rectifier power conversion efficiency up to 56.4% at 0 dBm input power using the HSMS-2850 Schottky diode. The efficiency is more enhanced by using SMS-7630-061 Schottky diode which is characterized by a low junction capacitance and a low threshold voltage to achieve higher conversion efficiency up to 71.1% at the same 0 dBm input power for the same resonating frequency band.
基金supported by TM R&D Malaysia under project number MMUE/190001.
文摘This paper presents a compact multi-band rectifier with an improved impedance matching bandwidth.It uses a combination of–matching network(MN)at Port-1,with a parallel connection of three cell branch MN at Port-2.The proposed impedance matching network(IMN)is adopted to reduce circuit complexity,to improve circuit performance,and power conversion efficiency(PCE)of the rectifier at low input power.The fabricated rectifier prototype operates at 0.92,1.82,2.1,2.46 and 2.65 GHz covering GSM/900,GSM/1800,UMTS2100,and Wi-Fi/2.45–LTE2600.The size of the compact rectifier on the PCB board is 0.13λ_(g)×0.1λ_(g).The fabricated rectifier achieved an RF-to DC(radio frequency direct current)PCE of 31.8%,24%,22.7%,and 15%,and 14.1%for−20 dBm at the five respective measured operating frequencies.The circuit attains a peak RF-to-DC PCE of 82.3%for an input power of 3 dBm at 0.92 GHz.The proposed rectifier realizes an ambient output dc voltage of 454 mV for multi-tone input signals from the two ports.The rectifier drives a bq25504-674 power management module(PMM)to achieve 1.21 V from the two-port connection.The rectifier has the ability to exploit both frequency domain through the multi-band operation with good impedance bandwidth and a spatial domain using dual-port configuration.Hence,it is a potential candidate for various applications in radio frequency energy harvesting(RFEH)system.
基金This work was supported by TM R&D Malaysia under Project Number MMUE/190001.
文摘This paper proposed the design of a dual-port rectifier with multifrequency operations.The RF rectifier is achieved using a combination of L-section inductive impedance matching network(IMN)at Port-1 with a multiple stubs impedance transformer at Port-2.The fabricated prototype can harvest RF signal from GSM/900,GSM/1800,UMTS/2100,Wi-Fi/2.45 and LTE/2600 frequency bands at(0.94,1.80,2.10,2.46,and 2.63 GHz),respectively.The rectifier occupies a small portion of a PCB board at 0.20λg×0.15λg.The proposed circuit realized a measured peak RF-to-dc(radio frequency direct current)power conversion efficiency(PCE)of(21%,22.76%,25.33%,21.57%,and 22.14%)for an input power of−20 dBm.The RF harvester attains a measured peak RF-to-dc PCE of 72.70%and an output dc voltage of 154 mV for an input power of 3 dBm at 2.46 GHz.Measurement of the proposed rectifier in the ambiance gives a peak dc output voltage of 376.1 mV from the five signal tones.Similarly,a low-powered bq25504-674 evaluation module(EVM)is integrated with the rectifier.The module boost and drive the rectifier output dc voltage to 945 mV.The performance of the proposed rectifier in the ambiance environment makes it a suitable module for low-powered RF applications.
