The moment tensor solution, source time function and spatial-temporal rupture process of the MS6.4 earthquake, which occurred in Ning’er, Yunnan Province, are obtained by inverting the broadband waveform data of 20 g...The moment tensor solution, source time function and spatial-temporal rupture process of the MS6.4 earthquake, which occurred in Ning’er, Yunnan Province, are obtained by inverting the broadband waveform data of 20 global stations. The inverted result shows that the scalar seismic moment is 5.51×1018 Nm, which corresponds to a moment magnitude of MW 6.4. The correspondent best double couple solution results in two nodal planes of strike 152°/dip 54°/rake 166°, and strike 250°/dip 79°/ rake 37°, respectively. Considering the isoseismals and geological structures in the meizoseismal region, the first nodal plane (strike 152°/ dip 54°/ rake 166°) is preferred to be the seismogenic fault. Thus, the MS6.4 earthquake occurred mainly along a right-lateral fault striking 152°. The source time function shows that the duration time of the earthquake is about 14 s. The most of the energy releases within the first 11 s and in 11-14 s the rupture is weak. The snapshots of the slip-rate indicate that the rupture process has 3 more detailed stages. In the first stage of the first 4 s after rupture initiation, the rupture propagates simultaneously toward both strike and dip directions; in the second stage of the following 3 s, the rupture extends to down-dip direction; and in the third stage, the rupture looks to be scattering on the fault. In general, this earthquake is of bilateral rupture, and the rupture mainly takes place in strike-dip direction. The major ruptured area is in the shape of a diamond with a dimension of 19 km. On the whole fault plane, the maximum slip is about 1.2 m, the average slip is about 0.1 m, the maxi-mum slip-rate is 0.4 m/s and the average slip-rate is 0.1 m/s. The features of the co-seismic theoretical displacement field of the Ning’er earthquake fault, calculated based on the inverted fault parameters, are consistent with those of the observed isoseismals.展开更多
In order to study the relationship between gravity variation and Menyuan Ms6.4 earth- quake, gravity variation characteristics in mid-eastern of Qilian Mountain were analyzed based on the 2012-2015 relative gravity da...In order to study the relationship between gravity variation and Menyuan Ms6.4 earth- quake, gravity variation characteristics in mid-eastern of Qilian Mountain were analyzed based on the 2012-2015 relative gravity datasets. The results indicated that the gravity changes in mid-eastern of Qilian Mountain increased gradually, while gravity changes around Menyuan remarkably. Besides, great positive-negative gravity changing gradients appeared along the Lengiongling Fault which was located at the north of Menyuan, and the 2016 Menyuan Ms6.4 earthquake occurred near the junction of positive and negative gravity changes.展开更多
In this study, the relative gravity data(2012 e2015), GPS data-derived horizontal deformation(2011 e2014) and the background vertical deformation from the leveling measurements(1970 e2011) in the northeastern margin o...In this study, the relative gravity data(2012 e2015), GPS data-derived horizontal deformation(2011 e2014) and the background vertical deformation from the leveling measurements(1970 e2011) in the northeastern margin of Tibetan Plateau were processed to systematically analysis the mechanism of temporalespatial patterns and the relationship with Menyuan Ms6.4 earthquake. It can be summarized in the following: 1) The regional gravity changes, the GPS and the vertical deformational showed an intense spatial relationship: the gravity increased along with the direction of horizontal movement, and decreased with the crustal uplift and vice versa, which reflected the inherited characteristics of geotectonic activities. 2) The crustal deformations were closely related to the active faults. The contour lines of gravity changes and vertical deformation were generally along with the Qilian-Haiyuan fault(strike is NWW), and the crustal horizontal deformation showed left-lateral strike slip motion near the Qilian-Haiyuan fault. 3) Menyuan Ms6.4 earthquake occurred in the high negative gravity variation area and a high gradient formed in regions, positive and negative variation of gravity amount to 110 m Gal.Specifically, a borderline of positive and negative gravity located in the south of epicenter along the north edge of Qilianshan fault and Lenglongling fault, as well as the vertical and/or horizontal deformation is intensely. The extrusion deformation, surface compression rate and gravity changes were obvious near the epicenter of 2016 Menyuan Earthquake.展开更多
The equation for determining cross-fault representative value is calculated based on hanging wall and foot wall reference level surfaces. The cross-fault data reliability are analyzed base on the stability of referenc...The equation for determining cross-fault representative value is calculated based on hanging wall and foot wall reference level surfaces. The cross-fault data reliability are analyzed base on the stability of reference datum and observation points, thereby facili- tating plotting of the representative value curves after removing interference. The spatial and temporal characteristics of fault deformation abnormalities before the 2016 Menyuan Ms6.4 earthquake, as well as the fault-movement characteristics reflected by representa- tive value, are summarized. The results show that many site trends had changed 1-3 years before the Menyuan Ms6.4 earthquake in the Qilian Fault, reflecting certain background abnormalities. The short-term abnormalities centrally had appeared in the 6 months to 1 year period before the earthquake near and in the neighborhood of the source region, demonstrating a significantly increased number of short-term abnormalities. Many sites near and in the neighborhood of the source region had strengthened inverse activities or had changed from positive to inverse activities in the most recent 2-3 years, which reflect stress-field enhancements or adjustment features.展开更多
This study adopted the Euler deconvolution method to conduct an inversion and interpretation of the depth and spatial distribution pattern of field source that lead to gravity variation. For this purpose, mobile gravi...This study adopted the Euler deconvolution method to conduct an inversion and interpretation of the depth and spatial distribution pattern of field source that lead to gravity variation. For this purpose, mobile gravity data from four periods in the Hexi region between 2011 and 2015 were obtained from an observation network. With a newly established theoretical model, we acquired the optimum inversion parameters and conducted calculation and analysis with the actual data. The results indicate that one is the appropriate value of the structure index for the inversion of the mobile gravity data. The inversion results of the actual data showed a comparable spatial distribution of the field source and a consistent structural trend with observations from the Qilian-Haiyuan Fault zone between 2011 and 2015. The distribution was in a blocking state at the epicenter of the Menyuan earthquake in 2016. Our quantitative study of the field source provides new insights into the inversion and interpretation of signals of mobile gravity variation.展开更多
On January 21, 2016, a strong earthquake with a magnitude of Ms6.4 occurred at Menyuan, Qinghai Province of China. In almost the same region, there was another strong earthquake happened in 1986, with similar magnitud...On January 21, 2016, a strong earthquake with a magnitude of Ms6.4 occurred at Menyuan, Qinghai Province of China. In almost the same region, there was another strong earthquake happened in 1986, with similar magnitude and focal mechanism. Based on comprehensive analysis of regional active faults, focal mechanism solutions, precise locations of aftershocks, as well as GPS crustal deformation, we inferred that the Lenglongiing active fault dips NE rather than SW as suggested by previous studies. Considering the facts that the 2016 and i986 Ms6.4 Menyuan earthquakes are closely located with similar focal mechanisms, both of the quakes are on the north side of the Lenglongling Fault and adjacent to the fault, and the fault is dipping NE direction, we suggest that the fault should be the seismogenic structure of the two events. The Lenglongling Fault, as the western segment of the well-known Tianzhu seismic gap in the Qilian-Haiyuan active fault system, is in a relatively active state with frequent earthquakes in recent years, implying a high level of strain accumulation and a high potential of major event. It is also possible that the Lengiongiing Fault and its adjacent fault, the Jinqianghe Fault in the Tianzhu seismic gap, are rupturing simultaneously in the future.展开更多
This study analyzes data regarding cross-fault deformations within the seismogenic zone of the 2016 Qinghai Menyuan Ms6.4 earthquake and its surrounding area. The results showed that the tendency anomaly sites near th...This study analyzes data regarding cross-fault deformations within the seismogenic zone of the 2016 Qinghai Menyuan Ms6.4 earthquake and its surrounding area. The results showed that the tendency anomaly sites near the epicenter had relatively long anomaly durations prior to the earthquake, while sudden-jumping anomaly sites started to increase in the middle eastern Qilian Mountains approximately a year before the earthquake and continued to increase and migrate towards the vicinity of the epicenter two to six months before the earthquake. Intensive observations a few days after the earthquake indicated that abnormal returns and turns before the earthquake were significant, but all had small amplitudes, and the coseismic effect was generally minor. In addition, the post-seismic tendency analysis of individual cross faults in the Qilian Mountain fault zone revealed an accelerating thrust tendency at all cross-fault sites in the middle Qilian Mountains after the 2008 Wenchuan Ms8.0 earthquake. This indicates that the Wenchuan mega-earthquake exerted a great impact on the dynamic environment of the northeastern margin of the Qinghai-Tibet plate and significantly enhanced the extrusion effect of the Indian plate on the middle Qilian Mountains, generating favorable conditions for the occurrence of Menyuan thrust earthquakes.展开更多
An Ms6.4 earthquake occurred in the Menyuan county of Qinghai Province on Jan 21, 2016. In order to recognize the development of horizontal deformation and distinguish precursory deformation anomalies, we obtained coo...An Ms6.4 earthquake occurred in the Menyuan county of Qinghai Province on Jan 21, 2016. In order to recognize the development of horizontal deformation and distinguish precursory deformation anomalies, we obtained coordinates time series, velocity and strain model around the seismic zones from processing of continuous observations from 2010 and 6 times of surveying Global Positioning System （GPS） data since 2009. The results show that, before the earthquake, the eastern segmentation of the Qilian tectonic zone where the Lenglongling Fault located is in strong crustal shortening and compressional strain state with dilatational rates of -15 to -25 ppb. The Lenglongling Fault has a strike-slip rate of 3.1 mm/a and a far-field differential orthogonal rate of 7 mm/a, while differential rate is only 1.2 mm/a near the fault, which reflects its locking feature with strain energy accumulation and high seismic risks. Dynamic evolution of deformation model shows that preevent dilatational rates around the seismic zones increases from 15 ppb/a to -20 ppb/a with its center moving to the source areas. Time series of N components of G337 station, which is 13.7 km away from the Lenglongling Fault, exhibit a 5 mm/a acceleration anomaly. Time series of base-station QHME （in Menyuan） displays a reverse acceleration from the end of Sep. to Dec., 2016 when it comes to a largest deviation, and the accumulative displacement is more than 4 mm and the value reverse till the earthquake. In our results, coseismic displacement of N, E, U components in QHME site are 3.0 mm, 3.0 mm, -5.4 mm, respectively. If we profile these values onto the Lenglongling Fault, we can achieve a 1.1 mm of strike slip and 4.1 mm updip slip relative to the hanging wall.展开更多
On January 21, 2016, a strong earthquake with a magnitude of Ms6.4 happened at Menyuan, Qinghai Province of China. In almost the same place, there was another strong earthquake happened in 1986, with similar magnitude...On January 21, 2016, a strong earthquake with a magnitude of Ms6.4 happened at Menyuan, Qinghai Province of China. In almost the same place, there was another strong earthquake happened in 1986, with similar magnitude and focal mechanism. In this paper, we analyze the characteristics of regional crustal deformation before the 2016 Menyuan Ms6.4 earth- quake by using the data from 10 continuous Global Positioning System （GPS） stations and 74 campaign-mode GPS stations within 200 km of this event： （a） Based on the velocity field from over ten years GPS observations, a regional strain rate field is calculated. The results indicate that the crustal strain rate and seismic moment accumulation rate of the Qilian- Haiyuan active fault, which is the seismogenic tectonics of the event, are significantly higher than the surrounding regions. In a 20 km~ 20 km area around the seismogenic region, the maximum and minimum principal strain rates are 21.5 nanostrain/a （NW-SE extension） and -46.6 nanostrain/a （NE-SW compression）, respectively, and the seismic moment accumulation rates is 17.4 Nm/a. The direction of principal compression is consistent with the focal mechanism of this event. （b） Based on the position time series of the continuous GPS stations for a time-span of about 6 years before the event, we calculate the strain time series. The results show that the dilatation of the seismogenic region is continuously reduced with a ＂non-linear＂ trend since 2010, which means the seismogenic region has been in a state of compression. However, about 2-3 months before the event, both the dilatation and maximum shear strain show significant inverse trends. These abnormal changes of crustal deformation may reflect the non-linear adjustment of the stress-strain accumulation of the seismogenic region, when the accumulation is approaching the critical value of rupture.展开更多
On May 21,2021,an MS6.4 earthquake occurred in Yangbi,Yunnan province,China,which exhibited typical foreshock-mainshock-aftershock characteristics.To better understand the velocity structure of the focal area and adja...On May 21,2021,an MS6.4 earthquake occurred in Yangbi,Yunnan province,China,which exhibited typical foreshock-mainshock-aftershock characteristics.To better understand the velocity structure of the focal area and adjacent fault zones,Pg/Sg travel times at 12 seismic stations for the local earthquakes with ML≥1.5 from 2009-2019 and the Yangbi sequence in May of 2021 were used to invert the three-dimensional(3D)structures for both vP and v_(P)/v_(S).The obtained structure extends deeply to 15 km for area(25°N-26.5°N,99.5°E-101°E)at a horizontal resolution of 10×10 km,and the accuracy of the v_(P) velocity was verified using airgun signals excited by the Binchuan Airgun Transmitting Seismic Station(BATSS).The resulting v_(P) and v^(P)/v_(S) images correlate with existing fault zones and the Yangbi sequence,including:(1)The shallow velocity structure at 0 km agrees with local topography,where the Binchuan basin exhibits low-v_(P) and high-v_(P)/v_(S) values.From 3-15 km,v_(P) and v_(P)/v_(S) show variations,and the boundaries are consistent with the main faults(e.g.,the Weixi-Qiaohou-Weishan,Honghe,and Chenghai faults).(2)The largest foreshock(M_(S)5.6),main-shock(MS6.4),and largest aftershock(M_(S)5.2)occurred near the boundaries where both vP and v_(P)/v_(S) have clear contrasts.(3)Small earthquakes are also concentrated in the transition zone between high-and low-vP and v_(P)/v_(S) anomalies,and are biased toward low-v_(P)/v_(S) zones.(4)Boundaries in v_(P) and v_(P)/v_(S) are observed at 20 km west of the Weixi-Qiaohou-Weishan fault,indicating that there may exist one hidden fault.展开更多
The Qilian Mountain active source network data was processed using the methods of stacking, cross-correlation and interpolation, and the airgun travel time variation characteristics of P and S waves around the January...The Qilian Mountain active source network data was processed using the methods of stacking, cross-correlation and interpolation, and the airgun travel time variation characteristics of P and S waves around the January 21,2016 MS6. 4 Menyua,Qinghai earthquake. The results show that about 6 months before the earthquake,the relative travel time of three stations near the epicenter showed a declined change( travel time decrease),and such a change of low value anomaly was recovered about 3 months before the earthquake. The travel time decrease then appeared again, and the earthquake occurred during the recovery process. The maximum decrease of the S-wave travel time was 18 ms,and the change in travel time returned to normal after the earthquake. The variation trend of the 3 stations is consistent,including the S-wave travel time change of station ZDY38,which is nearest to the epicenter and changed obviously,and the variation range of the travel time is smaller at the stations afar. This variation pattern is related to the position of the seismic source. The shorter travel time means the velocity increase,which may be related to the regional stress accumulation.展开更多
基金Supported by National Basic Research Program of China (Grant Nos. 2004CB418404-4 and 2001CB711005)National Natural Science Foundation of China (Grant Nos. 40574025 and 40474018)
文摘The moment tensor solution, source time function and spatial-temporal rupture process of the MS6.4 earthquake, which occurred in Ning’er, Yunnan Province, are obtained by inverting the broadband waveform data of 20 global stations. The inverted result shows that the scalar seismic moment is 5.51×1018 Nm, which corresponds to a moment magnitude of MW 6.4. The correspondent best double couple solution results in two nodal planes of strike 152°/dip 54°/rake 166°, and strike 250°/dip 79°/ rake 37°, respectively. Considering the isoseismals and geological structures in the meizoseismal region, the first nodal plane (strike 152°/ dip 54°/ rake 166°) is preferred to be the seismogenic fault. Thus, the MS6.4 earthquake occurred mainly along a right-lateral fault striking 152°. The source time function shows that the duration time of the earthquake is about 14 s. The most of the energy releases within the first 11 s and in 11-14 s the rupture is weak. The snapshots of the slip-rate indicate that the rupture process has 3 more detailed stages. In the first stage of the first 4 s after rupture initiation, the rupture propagates simultaneously toward both strike and dip directions; in the second stage of the following 3 s, the rupture extends to down-dip direction; and in the third stage, the rupture looks to be scattering on the fault. In general, this earthquake is of bilateral rupture, and the rupture mainly takes place in strike-dip direction. The major ruptured area is in the shape of a diamond with a dimension of 19 km. On the whole fault plane, the maximum slip is about 1.2 m, the average slip is about 0.1 m, the maxi-mum slip-rate is 0.4 m/s and the average slip-rate is 0.1 m/s. The features of the co-seismic theoretical displacement field of the Ning’er earthquake fault, calculated based on the inverted fault parameters, are consistent with those of the observed isoseismals.
基金funded by the directional earthquake tracking task offered by China Earthquake Administration(2016020213)
文摘In order to study the relationship between gravity variation and Menyuan Ms6.4 earth- quake, gravity variation characteristics in mid-eastern of Qilian Mountain were analyzed based on the 2012-2015 relative gravity datasets. The results indicated that the gravity changes in mid-eastern of Qilian Mountain increased gradually, while gravity changes around Menyuan remarkably. Besides, great positive-negative gravity changing gradients appeared along the Lengiongling Fault which was located at the north of Menyuan, and the 2016 Menyuan Ms6.4 earthquake occurred near the junction of positive and negative gravity changes.
基金funded by the directional earthquake tracking task offered by China Earthquake Administration (2017010203)the National Natural Science Foundation of China (No. 41274083)
文摘In this study, the relative gravity data(2012 e2015), GPS data-derived horizontal deformation(2011 e2014) and the background vertical deformation from the leveling measurements(1970 e2011) in the northeastern margin of Tibetan Plateau were processed to systematically analysis the mechanism of temporalespatial patterns and the relationship with Menyuan Ms6.4 earthquake. It can be summarized in the following: 1) The regional gravity changes, the GPS and the vertical deformational showed an intense spatial relationship: the gravity increased along with the direction of horizontal movement, and decreased with the crustal uplift and vice versa, which reflected the inherited characteristics of geotectonic activities. 2) The crustal deformations were closely related to the active faults. The contour lines of gravity changes and vertical deformation were generally along with the Qilian-Haiyuan fault(strike is NWW), and the crustal horizontal deformation showed left-lateral strike slip motion near the Qilian-Haiyuan fault. 3) Menyuan Ms6.4 earthquake occurred in the high negative gravity variation area and a high gradient formed in regions, positive and negative variation of gravity amount to 110 m Gal.Specifically, a borderline of positive and negative gravity located in the south of epicenter along the north edge of Qilianshan fault and Lenglongling fault, as well as the vertical and/or horizontal deformation is intensely. The extrusion deformation, surface compression rate and gravity changes were obvious near the epicenter of 2016 Menyuan Earthquake.
基金supported by the Seismic Regime Tracking Project in the Year of 2016,China Earthquake Administration(2016010205 and 2016020204)
文摘The equation for determining cross-fault representative value is calculated based on hanging wall and foot wall reference level surfaces. The cross-fault data reliability are analyzed base on the stability of reference datum and observation points, thereby facili- tating plotting of the representative value curves after removing interference. The spatial and temporal characteristics of fault deformation abnormalities before the 2016 Menyuan Ms6.4 earthquake, as well as the fault-movement characteristics reflected by representa- tive value, are summarized. The results show that many site trends had changed 1-3 years before the Menyuan Ms6.4 earthquake in the Qilian Fault, reflecting certain background abnormalities. The short-term abnormalities centrally had appeared in the 6 months to 1 year period before the earthquake near and in the neighborhood of the source region, demonstrating a significantly increased number of short-term abnormalities. Many sites near and in the neighborhood of the source region had strengthened inverse activities or had changed from positive to inverse activities in the most recent 2-3 years, which reflect stress-field enhancements or adjustment features.
基金funded by Science and Technology Project of Shanxi Province (2014K13-04)the National Science Foundation of China (41274083)+1 种基金the Special Fund for Earthquake Scientific Research of China (201308009)the Youth Seismic Regime Tracking Project in the Year of 2016, China Earthquake Administration (2016010222)
文摘This study adopted the Euler deconvolution method to conduct an inversion and interpretation of the depth and spatial distribution pattern of field source that lead to gravity variation. For this purpose, mobile gravity data from four periods in the Hexi region between 2011 and 2015 were obtained from an observation network. With a newly established theoretical model, we acquired the optimum inversion parameters and conducted calculation and analysis with the actual data. The results indicate that one is the appropriate value of the structure index for the inversion of the mobile gravity data. The inversion results of the actual data showed a comparable spatial distribution of the field source and a consistent structural trend with observations from the Qilian-Haiyuan Fault zone between 2011 and 2015. The distribution was in a blocking state at the epicenter of the Menyuan earthquake in 2016. Our quantitative study of the field source provides new insights into the inversion and interpretation of signals of mobile gravity variation.
基金supported by the Na-tional Science Foundation of China(41474090)the State Key Laboratory of Earthquake Dynamics(LED 2013A02)
文摘On January 21, 2016, a strong earthquake with a magnitude of Ms6.4 occurred at Menyuan, Qinghai Province of China. In almost the same region, there was another strong earthquake happened in 1986, with similar magnitude and focal mechanism. Based on comprehensive analysis of regional active faults, focal mechanism solutions, precise locations of aftershocks, as well as GPS crustal deformation, we inferred that the Lenglongiing active fault dips NE rather than SW as suggested by previous studies. Considering the facts that the 2016 and i986 Ms6.4 Menyuan earthquakes are closely located with similar focal mechanisms, both of the quakes are on the north side of the Lenglongling Fault and adjacent to the fault, and the fault is dipping NE direction, we suggest that the fault should be the seismogenic structure of the two events. The Lenglongling Fault, as the western segment of the well-known Tianzhu seismic gap in the Qilian-Haiyuan active fault system, is in a relatively active state with frequent earthquakes in recent years, implying a high level of strain accumulation and a high potential of major event. It is also possible that the Lengiongiing Fault and its adjacent fault, the Jinqianghe Fault in the Tianzhu seismic gap, are rupturing simultaneously in the future.
基金supported by the Youth Seismic Regime Tracking Project in the Year of 2016,China Earthquake Administration(2016010217)the Special Earthquake Research Project granted by the China Earthquake Administration(201508009)
文摘This study analyzes data regarding cross-fault deformations within the seismogenic zone of the 2016 Qinghai Menyuan Ms6.4 earthquake and its surrounding area. The results showed that the tendency anomaly sites near the epicenter had relatively long anomaly durations prior to the earthquake, while sudden-jumping anomaly sites started to increase in the middle eastern Qilian Mountains approximately a year before the earthquake and continued to increase and migrate towards the vicinity of the epicenter two to six months before the earthquake. Intensive observations a few days after the earthquake indicated that abnormal returns and turns before the earthquake were significant, but all had small amplitudes, and the coseismic effect was generally minor. In addition, the post-seismic tendency analysis of individual cross faults in the Qilian Mountain fault zone revealed an accelerating thrust tendency at all cross-fault sites in the middle Qilian Mountains after the 2008 Wenchuan Ms8.0 earthquake. This indicates that the Wenchuan mega-earthquake exerted a great impact on the dynamic environment of the northeastern margin of the Qinghai-Tibet plate and significantly enhanced the extrusion effect of the Indian plate on the middle Qilian Mountains, generating favorable conditions for the occurrence of Menyuan thrust earthquakes.
基金support by National Natural Science Foundation of China(51479163,41174083)
文摘An Ms6.4 earthquake occurred in the Menyuan county of Qinghai Province on Jan 21, 2016. In order to recognize the development of horizontal deformation and distinguish precursory deformation anomalies, we obtained coordinates time series, velocity and strain model around the seismic zones from processing of continuous observations from 2010 and 6 times of surveying Global Positioning System （GPS） data since 2009. The results show that, before the earthquake, the eastern segmentation of the Qilian tectonic zone where the Lenglongling Fault located is in strong crustal shortening and compressional strain state with dilatational rates of -15 to -25 ppb. The Lenglongling Fault has a strike-slip rate of 3.1 mm/a and a far-field differential orthogonal rate of 7 mm/a, while differential rate is only 1.2 mm/a near the fault, which reflects its locking feature with strain energy accumulation and high seismic risks. Dynamic evolution of deformation model shows that preevent dilatational rates around the seismic zones increases from 15 ppb/a to -20 ppb/a with its center moving to the source areas. Time series of N components of G337 station, which is 13.7 km away from the Lenglongling Fault, exhibit a 5 mm/a acceleration anomaly. Time series of base-station QHME （in Menyuan） displays a reverse acceleration from the end of Sep. to Dec., 2016 when it comes to a largest deviation, and the accumulative displacement is more than 4 mm and the value reverse till the earthquake. In our results, coseismic displacement of N, E, U components in QHME site are 3.0 mm, 3.0 mm, -5.4 mm, respectively. If we profile these values onto the Lenglongling Fault, we can achieve a 1.1 mm of strike slip and 4.1 mm updip slip relative to the hanging wall.
基金supported by the National Science Foundation of China(41474090)Science for Earthquake Resilience(XH14063)the State Key Laboratory of Earthquake Dynamics(LED2013A02)
文摘On January 21, 2016, a strong earthquake with a magnitude of Ms6.4 happened at Menyuan, Qinghai Province of China. In almost the same place, there was another strong earthquake happened in 1986, with similar magnitude and focal mechanism. In this paper, we analyze the characteristics of regional crustal deformation before the 2016 Menyuan Ms6.4 earth- quake by using the data from 10 continuous Global Positioning System （GPS） stations and 74 campaign-mode GPS stations within 200 km of this event： （a） Based on the velocity field from over ten years GPS observations, a regional strain rate field is calculated. The results indicate that the crustal strain rate and seismic moment accumulation rate of the Qilian- Haiyuan active fault, which is the seismogenic tectonics of the event, are significantly higher than the surrounding regions. In a 20 km~ 20 km area around the seismogenic region, the maximum and minimum principal strain rates are 21.5 nanostrain/a （NW-SE extension） and -46.6 nanostrain/a （NE-SW compression）, respectively, and the seismic moment accumulation rates is 17.4 Nm/a. The direction of principal compression is consistent with the focal mechanism of this event. （b） Based on the position time series of the continuous GPS stations for a time-span of about 6 years before the event, we calculate the strain time series. The results show that the dilatation of the seismogenic region is continuously reduced with a ＂non-linear＂ trend since 2010, which means the seismogenic region has been in a state of compression. However, about 2-3 months before the event, both the dilatation and maximum shear strain show significant inverse trends. These abnormal changes of crustal deformation may reflect the non-linear adjustment of the stress-strain accumulation of the seismogenic region, when the accumulation is approaching the critical value of rupture.
基金supported jointly by the Special Fund of the Institute of Geophysics,China Earthquake Administration(Grant Nos.DQJB20K36,DQJB19B29,and DQJB20B15)the National Natural Science Foundation of China(Grant Nos.41790462 and 41974069).
文摘On May 21,2021,an MS6.4 earthquake occurred in Yangbi,Yunnan province,China,which exhibited typical foreshock-mainshock-aftershock characteristics.To better understand the velocity structure of the focal area and adjacent fault zones,Pg/Sg travel times at 12 seismic stations for the local earthquakes with ML≥1.5 from 2009-2019 and the Yangbi sequence in May of 2021 were used to invert the three-dimensional(3D)structures for both vP and v_(P)/v_(S).The obtained structure extends deeply to 15 km for area(25°N-26.5°N,99.5°E-101°E)at a horizontal resolution of 10×10 km,and the accuracy of the v_(P) velocity was verified using airgun signals excited by the Binchuan Airgun Transmitting Seismic Station(BATSS).The resulting v_(P) and v^(P)/v_(S) images correlate with existing fault zones and the Yangbi sequence,including:(1)The shallow velocity structure at 0 km agrees with local topography,where the Binchuan basin exhibits low-v_(P) and high-v_(P)/v_(S) values.From 3-15 km,v_(P) and v_(P)/v_(S) show variations,and the boundaries are consistent with the main faults(e.g.,the Weixi-Qiaohou-Weishan,Honghe,and Chenghai faults).(2)The largest foreshock(M_(S)5.6),main-shock(MS6.4),and largest aftershock(M_(S)5.2)occurred near the boundaries where both vP and v_(P)/v_(S) have clear contrasts.(3)Small earthquakes are also concentrated in the transition zone between high-and low-vP and v_(P)/v_(S) anomalies,and are biased toward low-v_(P)/v_(S) zones.(4)Boundaries in v_(P) and v_(P)/v_(S) are observed at 20 km west of the Weixi-Qiaohou-Weishan fault,indicating that there may exist one hidden fault.
基金jointly funded by the Sparkle Program of China Earthquake Administration(XH17039)the Project on the Surface of the National Natural Science Foundation of China(41574044)
文摘The Qilian Mountain active source network data was processed using the methods of stacking, cross-correlation and interpolation, and the airgun travel time variation characteristics of P and S waves around the January 21,2016 MS6. 4 Menyua,Qinghai earthquake. The results show that about 6 months before the earthquake,the relative travel time of three stations near the epicenter showed a declined change( travel time decrease),and such a change of low value anomaly was recovered about 3 months before the earthquake. The travel time decrease then appeared again, and the earthquake occurred during the recovery process. The maximum decrease of the S-wave travel time was 18 ms,and the change in travel time returned to normal after the earthquake. The variation trend of the 3 stations is consistent,including the S-wave travel time change of station ZDY38,which is nearest to the epicenter and changed obviously,and the variation range of the travel time is smaller at the stations afar. This variation pattern is related to the position of the seismic source. The shorter travel time means the velocity increase,which may be related to the regional stress accumulation.
