The incubation layers in microcrystalline silicon films （μc-Si：H） are studied in detail. The incubation layers in μc- Si：H films are investigated by biracial Raman spectra, and the results indicate that either d...The incubation layers in microcrystalline silicon films （μc-Si：H） are studied in detail. The incubation layers in μc- Si：H films are investigated by biracial Raman spectra, and the results indicate that either decreasing silane concentration （SC） or increasing plasma power can reduce the thickness of incubation layer. The analysis of the in-situ diagnosis by plasma optical emission spectrum （OES） shows that the emission intensities of the SiH＊（412 nm） and Hα （656 nm） lines are time-dependent, thus SiH＊/Hα ratio is of temporal evolution. The variation of SiH＊/Hα ratio can indicate the variation in relative concentration of precursor and atomic hydrogen in the plasma. And the atomic hydrogen plays a crucial role in the formation of μc-Si：H; thus, with the plasma excited, the temporal-evolution SiH＊/Hα ratio has a great influence on the formation of an incubation layer in the initial growth stage. The fact that decreasing the SC or increasing the plasma power can decrease the SIH＊/Hα ratio is used to explain why the thickness of incubation layer can reduce with decreasing the SC or increasing the plasma power.展开更多
Coal gasification fine slag(FS)is a typical solid waste generated in coal gasification.Its current disposal methods of stockpil-ing and landfilling have caused serious soil and ecological hazards.Separation recovery a...Coal gasification fine slag(FS)is a typical solid waste generated in coal gasification.Its current disposal methods of stockpil-ing and landfilling have caused serious soil and ecological hazards.Separation recovery and the high-value utilization of residual carbon(RC)in FS are the keys to realizing the win-win situation of the coal chemical industry in terms of economic and environmental benefits.The structural properties,such as pore,surface functional group,and microcrystalline structures,of RC in FS(FS-RC)not only affect the flotation recovery efficiency of FS-RC but also form the basis for the high-value utilization of FS-RC.In this paper,the characteristics of FS-RC in terms of pore structure,surface functional groups,and microcrystalline structure are sorted out in accordance with gasification type and FS particle size.The reasons for the formation of the special structural properties of FS-RC are analyzed,and their influence on the flotation separation and high-value utilization of FS-RC is summarized.Separation methods based on the pore structural characterist-ics of FS-RC,such as ultrasonic pretreatment-pore-blocking flotation and pore breaking-flocculation flotation,are proposed to be the key development technologies for improving FS-RC recovery in the future.The design of low-cost,low-dose collectors containing polar bonds based on the surface and microcrystalline structures of FS-RC is proposed to be an important breakthrough point for strengthening the flotation efficiency of FS-RC in the future.The high-value utilization of FS should be based on the physicochemical structural proper-ties of FS-RC and should focus on the environmental impact of hazardous elements and the recyclability of chemical waste liquid to es-tablish an environmentally friendly utilization method.This review is of great theoretical importance for the comprehensive understand-ing of the unique structural properties of FS-RC,the breakthrough of the technological bottleneck in the efficient flotation separation of FS,and the expa展开更多
A series of hydrogenated silicon thin films were prepared by the radio frequency plasma enhanced chemical vapor deposition method (RF-PECVD) with various si-lane concentrations. The influence of silane concentration o...A series of hydrogenated silicon thin films were prepared by the radio frequency plasma enhanced chemical vapor deposition method (RF-PECVD) with various si-lane concentrations. The influence of silane concentration on structural and elec-trical characteristics of these films was investigated to study the phase transition region from amorphous to microcrystalline phase. At the same time,optical emis-sion spectra (OES) from the plasma during the deposition process were monitored to get information about the plasma properties,Raman spectra were measured to study the structural characteristics of the deposited films. The combinatorial analysis of OES and Raman spectra results demonstrated that the OES can be used as a fast method to diagnose phase transition from amorphous to microcrystalline silicon. At last the physical mechanism,why both OES and Raman can be used to diagnose the phase transition,was analyzed theoretically.展开更多
Phosphotungstic acid(H_3PW_(12)O_(40), HPW), a kind of solid acid, is widely used for hydrolyzing cellulose to prepare microcrystalline cellulose(MCC). MCC is usually used in food, synthetic leather, chemical and phar...Phosphotungstic acid(H_3PW_(12)O_(40), HPW), a kind of solid acid, is widely used for hydrolyzing cellulose to prepare microcrystalline cellulose(MCC). MCC is usually used in food, synthetic leather, chemical and pharmaceutical industries. The use of response surface methodology(RSM)can help avoid the random error caused by single factor experimental design,reduce test times and cost, and improve quality. The RSM was used in this study to determine the following optimal process conditions: H^+ molar quantity, 31 mmol/L; reaction temperature, 93℃; reaction time, 2 h; and solid to liquid ratio, 1∶38. Under these conditions, the crystallinity of MCC was77.4%. Thus, the use of RSM allows the preparation of MCC with higher performance and increased crystallinity.展开更多
The microcrystalline structure and microvoid structure in carbon fibers during graphitization process （2300-2700 ℃） were characterized employing laser micro-Raman scattering （Raman）, X-ray diffraction （XRD）, sm...The microcrystalline structure and microvoid structure in carbon fibers during graphitization process （2300-2700 ℃） were characterized employing laser micro-Raman scattering （Raman）, X-ray diffraction （XRD）, small angle X-ray scattering （SAXS）, and high-resolution transmission electron microscopy （HR-TEM）. The crystalline sizes （La, Lc） increased and interlayer spacing （d002） decreased with increasing heat treatment temperature （HTT）. The microvoids in the fibers grew up and contacted to the neighbors with the development of microcrystalline. In addition, the preferred orientation of graphite crystallite along fiber axis decreased and microvoids increased. The results are crucial for analyzing the evolution of microstructure of carbon fibers in the process of heat treatment and important for the preparation of high strength and high modulus carbon fibers.展开更多
文摘The incubation layers in microcrystalline silicon films （μc-Si：H） are studied in detail. The incubation layers in μc- Si：H films are investigated by biracial Raman spectra, and the results indicate that either decreasing silane concentration （SC） or increasing plasma power can reduce the thickness of incubation layer. The analysis of the in-situ diagnosis by plasma optical emission spectrum （OES） shows that the emission intensities of the SiH＊（412 nm） and Hα （656 nm） lines are time-dependent, thus SiH＊/Hα ratio is of temporal evolution. The variation of SiH＊/Hα ratio can indicate the variation in relative concentration of precursor and atomic hydrogen in the plasma. And the atomic hydrogen plays a crucial role in the formation of μc-Si：H; thus, with the plasma excited, the temporal-evolution SiH＊/Hα ratio has a great influence on the formation of an incubation layer in the initial growth stage. The fact that decreasing the SC or increasing the plasma power can decrease the SIH＊/Hα ratio is used to explain why the thickness of incubation layer can reduce with decreasing the SC or increasing the plasma power.
基金the National Natural Science Foundation of China(No.52374279)the Natural Science Foundation of Shaanxi Province(No.2023-YBGY-055).
文摘Coal gasification fine slag(FS)is a typical solid waste generated in coal gasification.Its current disposal methods of stockpil-ing and landfilling have caused serious soil and ecological hazards.Separation recovery and the high-value utilization of residual carbon(RC)in FS are the keys to realizing the win-win situation of the coal chemical industry in terms of economic and environmental benefits.The structural properties,such as pore,surface functional group,and microcrystalline structures,of RC in FS(FS-RC)not only affect the flotation recovery efficiency of FS-RC but also form the basis for the high-value utilization of FS-RC.In this paper,the characteristics of FS-RC in terms of pore structure,surface functional groups,and microcrystalline structure are sorted out in accordance with gasification type and FS particle size.The reasons for the formation of the special structural properties of FS-RC are analyzed,and their influence on the flotation separation and high-value utilization of FS-RC is summarized.Separation methods based on the pore structural characterist-ics of FS-RC,such as ultrasonic pretreatment-pore-blocking flotation and pore breaking-flocculation flotation,are proposed to be the key development technologies for improving FS-RC recovery in the future.The design of low-cost,low-dose collectors containing polar bonds based on the surface and microcrystalline structures of FS-RC is proposed to be an important breakthrough point for strengthening the flotation efficiency of FS-RC in the future.The high-value utilization of FS should be based on the physicochemical structural proper-ties of FS-RC and should focus on the environmental impact of hazardous elements and the recyclability of chemical waste liquid to es-tablish an environmentally friendly utilization method.This review is of great theoretical importance for the comprehensive understand-ing of the unique structural properties of FS-RC,the breakthrough of the technological bottleneck in the efficient flotation separation of FS,and the expa
基金Supported by the National Basic Research Program of China (Grant Nos. 2006CB202602 and 2006CB202603)
文摘A series of hydrogenated silicon thin films were prepared by the radio frequency plasma enhanced chemical vapor deposition method (RF-PECVD) with various si-lane concentrations. The influence of silane concentration on structural and elec-trical characteristics of these films was investigated to study the phase transition region from amorphous to microcrystalline phase. At the same time,optical emis-sion spectra (OES) from the plasma during the deposition process were monitored to get information about the plasma properties,Raman spectra were measured to study the structural characteristics of the deposited films. The combinatorial analysis of OES and Raman spectra results demonstrated that the OES can be used as a fast method to diagnose phase transition from amorphous to microcrystalline silicon. At last the physical mechanism,why both OES and Raman can be used to diagnose the phase transition,was analyzed theoretically.
基金supported by the National Key Research and Development Program of China (2017YFB0307900)the Key Research and Development Project of Shaanxi Province (2017ZDXM-SF-090)the State Key Laboratory of Donghua University (NO. LK1601)
文摘Phosphotungstic acid(H_3PW_(12)O_(40), HPW), a kind of solid acid, is widely used for hydrolyzing cellulose to prepare microcrystalline cellulose(MCC). MCC is usually used in food, synthetic leather, chemical and pharmaceutical industries. The use of response surface methodology(RSM)can help avoid the random error caused by single factor experimental design,reduce test times and cost, and improve quality. The RSM was used in this study to determine the following optimal process conditions: H^+ molar quantity, 31 mmol/L; reaction temperature, 93℃; reaction time, 2 h; and solid to liquid ratio, 1∶38. Under these conditions, the crystallinity of MCC was77.4%. Thus, the use of RSM allows the preparation of MCC with higher performance and increased crystallinity.
基金financially supported by the National High Technology Research and Development Program of China(863 Program,No.2015AA03A204)
文摘The microcrystalline structure and microvoid structure in carbon fibers during graphitization process （2300-2700 ℃） were characterized employing laser micro-Raman scattering （Raman）, X-ray diffraction （XRD）, small angle X-ray scattering （SAXS）, and high-resolution transmission electron microscopy （HR-TEM）. The crystalline sizes （La, Lc） increased and interlayer spacing （d002） decreased with increasing heat treatment temperature （HTT）. The microvoids in the fibers grew up and contacted to the neighbors with the development of microcrystalline. In addition, the preferred orientation of graphite crystallite along fiber axis decreased and microvoids increased. The results are crucial for analyzing the evolution of microstructure of carbon fibers in the process of heat treatment and important for the preparation of high strength and high modulus carbon fibers.
