Micro-indentation tests at scales on the order of sub-micron have shown that the measured hardness increases strongly with the indent depth or indent size decreasing, which is frequently referred to as the size effect...Micro-indentation tests at scales on the order of sub-micron have shown that the measured hardness increases strongly with the indent depth or indent size decreasing, which is frequently referred to as the size effect. However, the trend is at odds with the size-independence implied by conventional elastic-plastic theory. In this paper, strain gradient plasticity theory is used to model the size effect for materials undergoing the micro-indenting. Meanwhile, the micro-indentation experiments for single crystal copper and single crystal aluminum are carried out. By the comparison of the theoretical predictions with experimental measurements, the micro-scale parameter of strain gradient plasticity theory is predicted, which is fallen into the region of 0.8—1.5 micron for the conventional metals such as copper (Cu), aluminum (Al) and silver (Ag). Moreover, the phenomena of the pile-up and sink-in near micro-indent boundary are investigated and analyzed in detail.展开更多
Toarcian claystone such as that of the Callovo-Oxfordian is a qualified multiphase material. The claystone samples tested in this study are composed of four main mineral phases: silicates(clay minerals, quartz,feldspa...Toarcian claystone such as that of the Callovo-Oxfordian is a qualified multiphase material. The claystone samples tested in this study are composed of four main mineral phases: silicates(clay minerals, quartz,feldspars, micas)(z86%), sulphides(pyrite)(z3%), carbonates(calcite, dolomite)(z10%) and organic kerogen(z1%). Three sets of measurements of the modulus of deformability were compared as determined in(i) nanoindentation tests with a constant indentation depth of 2 mm,(ii) micro-indentation tests with a constant indentation depth of 20 mm, and(iii) meso-compression tests with a constant displacement of 200 mm. These three experimental methods have already been validated in earlier studies. The main objective of this study is to demonstrate the influence of the scaling effect on the modulus of deformability of the material. Different frequency distributions of the modulus of deformability were obtained at the different sample scales:(i) in nano-indentation tests, the distribution was spread between 15 GPa and 90 GPa and contained one peak at34 GPa and another at 51 GPa;(ii) in the micro-indentation tests, the distribution was spread between 25 GPa and 60 GPa and displayed peaks at 26 GPa and 37 GPa; and(iii) in the meso-compression tests, a narrow frequency distribution was obtained, ranging from 25 GPa to 50 GPa and with a maximum at around 35 GPa.展开更多
The strength of clay-rich sandstone decreases significantly when in contact with water due to softening effects.This scenario can pose a severe threat to the stability of water diversion tunnels during construction an...The strength of clay-rich sandstone decreases significantly when in contact with water due to softening effects.This scenario can pose a severe threat to the stability of water diversion tunnels during construction and operation periods.To address the issues related to water-induced softening in clay-rich sandstone zones in a water diversion tunnel of Lanzhou Water Supply Project,the microscopic and micromechanical variations of rocks due to increasing water content in two different zones i.e.zones A and B,were determined by various testing methods,such as X-ray diffraction(XRD),scanning electron microscopy(SEM),thin section microscopy,micro-indentation test,sonic velocity test,and slake durability test.The microscopic analysis confirms the presence of montmorillonite mineral which is the dominant problematic geomaterial in engineering application.The integrity and durability of clay-rich sandstone were determined with sonic velocity and slake durability tests to calibrate the results obtained by the micro-indentation test.It shows that the elastic modulus and hardness of clay-rich sandstone decrease with the increase of saturation time,up to 144 h,which is more significant and rapid during early stage of saturation.After 144 h of saturation,the elastic modulus decreases by 89% and 97%,and the hardness decreases by 89% and 99% for zones A and B sandstones,respectively.The results of slake durability and sonic velocity indicate that zone A sandsto ne remains 56.19% durability after 144 h of saturation,while zone B sandstone loses its durability merely after 72 h of saturation.The clay-rich sandstone starts to dissolve in water when the saturation time exceeds 144 h.The significant decreases in strength and durability of clay-rich sandstone due to water-induced softening are serious threats to tunnel stability.The improvements in the strength of surrounding rock mass by grouting and permeability by installation of drainage galleries can reduce the damage caused by water-induced softening.展开更多
The increasing energy demand has pushed oil and gas exploration and development limits to extremely challenging and harsher HTHP (High Temperature and High Pressure) environments. Maintaining wellbore integrity in the...The increasing energy demand has pushed oil and gas exploration and development limits to extremely challenging and harsher HTHP (High Temperature and High Pressure) environments. Maintaining wellbore integrity in these environments, particularly in HPHT reservoirs with corrosive gases, presents a significant challenge. Robust risk evaluation and mitigation strategies are required to address these reservoirs' safety, economic, and environmental uncertainties. This study investigates chemo-mechanical properties degradations of class G oil well cement blended with silica fume, liquid silica, and latex when exposed to high temperature (150 °C) and high partial pressure of CO_(2) saturated brine. The result shows that these admixtures surround the cement grains and fill the interstitial spaces between the cement particles to form a dense crystal system of C–S–H. Consequently, the cement's percentage of pore voids, permeability, and the content of alkali compounds reduce, resulting in increased resistance to CO_(2) corrosion. Liquid silica, a specially prepared silica suspension, is a more effective alternative to silica fume in protecting oil well cement against CO_(2) chemical degradation. Micro-indentation analysis shows a significant deterioration in the mechanical properties of the cement, including average elastic modulus and hardness, particularly in the outer zones in direct contact with corrosive fluids. This study highlights the significance of incorporating admixtures to mitigate the effects of CO_(2) corrosion in HPHT environments and provides a valuable technique for quantitatively evaluating the mechanical-chemical degradation of cement sheath.展开更多
Micro-mechanical properties of a claystone were tested after undergoing alkaline perturbation on site(Tournemire,CD borehole)for 18 years.In a saturated context and outside the excavation disturbed zone(EDZ),the clays...Micro-mechanical properties of a claystone were tested after undergoing alkaline perturbation on site(Tournemire,CD borehole)for 18 years.In a saturated context and outside the excavation disturbed zone(EDZ),the claystone exhibits a 11.6-mm black rim at the cement/paste interface,which shows a different mechanical behaviour from the rest of the claystone.Three sets of measurements of elastic modulus were performed using:(i)nano-indentation tests with a constant indentation depth of 2 mm,(ii)microindentation tests with a constant indentation depth of 20 mm,and(iii)meso-compression tests with a constant displacement of 200 mm.The increase of the modulus of deformability in the black rim is between 15 GPa and 20 GPa according to the scale.Moreover,an overall decrease of the modulus of deformability from the smallest to the largest scale is observed in each zone.In view of the mineralogy and petrographic observations,higher values of modulus of deformability in the black rim are related to carbonate content and its distribution.Precipitation of cementitious carbonates as inclusions and very thin partings leads to hardening of the claystone.展开更多
Research is being conducted to study the effects of particulate deposition from contaminants in coal synthesis gas (syngas) on the mechanical properties of thermal barrier coatings (TBC) employed on integrated gasific...Research is being conducted to study the effects of particulate deposition from contaminants in coal synthesis gas (syngas) on the mechanical properties of thermal barrier coatings (TBC) employed on integrated gasification combined cycle (IGCC) turbine hot section airfoils. West Virginia University (WVU) had been working with US Department of Energy, National Energy Technology Laboratory (NETL) to simulate deposition on the pressure side of an IGCC turbine first stage vane. To model the deposition, coal fly ash was injected into the flow of a combustor facility and deposited onto TBC coated, angled film-cooled test articles in a high pressure (approximately 4 atm) and a high temperature (1560 K) environment. To investigate the interaction between the deposition and the TBC, a load-based multiple-partial unloading micro-indentation technique was used to quantitatively evaluate the mechanical properties of materials. The indentation results showed the Young’s Modulus of the ceramic top coat was higher in areas with deposition formation due to the penetration of the fly ash. This corresponds with the reduction of strain tolerance of the 7% yttria-stabilized zirconia (7YSZ) coatings.展开更多
By using instrumental micro-indentation technique, the microhardness and Young＇s modulus of SiC particles reinforced aluminum matrix composites were investigated with micro- compression-tester （MCT）. The micro-inde...By using instrumental micro-indentation technique, the microhardness and Young＇s modulus of SiC particles reinforced aluminum matrix composites were investigated with micro- compression-tester （MCT）. The micro-indentation experiments were performed with different max- imum loads, and with three loading speeds of 2.231, 4.462 and 19.368 mN/s respectively. During the investigation, matrix, particle and interface were tested by micro-indentation experiments. The results exhibit that the variations of Young＇s modulus and microhardness at particle, matrix and interface were highly dependent on the loading conditions （maximum load and loading speed） and the locations of indentation. Micro-indentation hardness experiments of matrix show the indentation size effects, i.e. the indentation hardness decreased with the indentation depth increas- ing. During the analysis, the effect of loading conditions on Young＇s modulus and microhardness were explained. Besides, the elastic-plastic properties of matrix were analyzed. The validity of cal- culated results was identified by finite element simulation. And the simulation results had been pre- liminarily analyzed from statistical aspect.展开更多
It is an important mechanical parameter for fracture toughness that affects hydraulic fracturing.Some methods such as indoor test core and logging data interpretation are commonly used to obtain fracture toughness.The...It is an important mechanical parameter for fracture toughness that affects hydraulic fracturing.Some methods such as indoor test core and logging data interpretation are commonly used to obtain fracture toughness.These methods,however,have their own limitations.Liu's method has focused the mechanical properties of shale including fracture toughness based on micro-/nano-indentation experiments.Zeng's method has pointed that the former method of calculating fracture toughness ignores the maximum holding stage in the indentation-displacement curves,they point out and correct the fracture stress intensity factor model,but the final calculation of the fracture toughness of the numerical difference is of two orders of magnitude.In this paper,micro-indentation experiments were carried out to further analyze and correct the model by collecting and analyzing Longmaxi shale cuttings.After Zeng and Liu's methods are combined,the irreversible elastic energy by energy area actually was measured.To some extent,the difference between the two kinds of fracture toughness is reduced.展开更多
A new strain gradient theory which is based on energy nonlocal model is proposed in this paper, and the theory is applied to investigate the size effects in thin metallic wire torsion, ultra-thin beam bending and micr...A new strain gradient theory which is based on energy nonlocal model is proposed in this paper, and the theory is applied to investigate the size effects in thin metallic wire torsion, ultra-thin beam bending and micro-indentation of polycrystalline copper. First, an energy nonlocal model is suggested. Second, based on the model, a new strain gradient theory is derived. Third, the new theory is applied to analyze three representative experiments.展开更多
Indentation is a simple and nondestructive method to measure the mechanical properties of soft materials, such as hydrogels, elastomers and soft tissues. In this work, we have developed a micro-indentation system with...Indentation is a simple and nondestructive method to measure the mechanical properties of soft materials, such as hydrogels, elastomers and soft tissues. In this work, we have developed a micro-indentation system with high-precision to measure the mechanical properties of soft materials, where the shear modulus and Poisson＇s ratio of the materials can be obtained by analyzing the load relaxation curve. We have validated the accuracy and stability of the system by comparing the measured mechanical properties of a polyethylene glycol sample with that obtained from a commercial instrument. The mechanical properties of another typical polydimethylsiloxane sample submerged in heptane are measured by using conical and spherical indenters, respectively. The measured values of shear modulus and Poisson＇s ratio are within a reasonable range.展开更多
基金This work was supported by the National Natural Science Foundation of China (Grant Nos. 19891180 and19925211) jointly supported by the Fundamental Research Project from the Chinese Academy of Sciences (Grant No. KJ95-1-201).
文摘Micro-indentation tests at scales on the order of sub-micron have shown that the measured hardness increases strongly with the indent depth or indent size decreasing, which is frequently referred to as the size effect. However, the trend is at odds with the size-independence implied by conventional elastic-plastic theory. In this paper, strain gradient plasticity theory is used to model the size effect for materials undergoing the micro-indenting. Meanwhile, the micro-indentation experiments for single crystal copper and single crystal aluminum are carried out. By the comparison of the theoretical predictions with experimental measurements, the micro-scale parameter of strain gradient plasticity theory is predicted, which is fallen into the region of 0.8—1.5 micron for the conventional metals such as copper (Cu), aluminum (Al) and silver (Ag). Moreover, the phenomena of the pile-up and sink-in near micro-indent boundary are investigated and analyzed in detail.
文摘Toarcian claystone such as that of the Callovo-Oxfordian is a qualified multiphase material. The claystone samples tested in this study are composed of four main mineral phases: silicates(clay minerals, quartz,feldspars, micas)(z86%), sulphides(pyrite)(z3%), carbonates(calcite, dolomite)(z10%) and organic kerogen(z1%). Three sets of measurements of the modulus of deformability were compared as determined in(i) nanoindentation tests with a constant indentation depth of 2 mm,(ii) micro-indentation tests with a constant indentation depth of 20 mm, and(iii) meso-compression tests with a constant displacement of 200 mm. These three experimental methods have already been validated in earlier studies. The main objective of this study is to demonstrate the influence of the scaling effect on the modulus of deformability of the material. Different frequency distributions of the modulus of deformability were obtained at the different sample scales:(i) in nano-indentation tests, the distribution was spread between 15 GPa and 90 GPa and contained one peak at34 GPa and another at 51 GPa;(ii) in the micro-indentation tests, the distribution was spread between 25 GPa and 60 GPa and displayed peaks at 26 GPa and 37 GPa; and(iii) in the meso-compression tests, a narrow frequency distribution was obtained, ranging from 25 GPa to 50 GPa and with a maximum at around 35 GPa.
基金supported by the National Key R&D Program of China(Grant Nos.2018YFC0809601 and 2018YFC0809600)Key projects of the Yalong River Joint Fund of the National Natural Science Foundation of China(Grant No.U1865203)Hubei Province Natural Science Foundation Innovation Group(Grant No.2018CFA013)。
文摘The strength of clay-rich sandstone decreases significantly when in contact with water due to softening effects.This scenario can pose a severe threat to the stability of water diversion tunnels during construction and operation periods.To address the issues related to water-induced softening in clay-rich sandstone zones in a water diversion tunnel of Lanzhou Water Supply Project,the microscopic and micromechanical variations of rocks due to increasing water content in two different zones i.e.zones A and B,were determined by various testing methods,such as X-ray diffraction(XRD),scanning electron microscopy(SEM),thin section microscopy,micro-indentation test,sonic velocity test,and slake durability test.The microscopic analysis confirms the presence of montmorillonite mineral which is the dominant problematic geomaterial in engineering application.The integrity and durability of clay-rich sandstone were determined with sonic velocity and slake durability tests to calibrate the results obtained by the micro-indentation test.It shows that the elastic modulus and hardness of clay-rich sandstone decrease with the increase of saturation time,up to 144 h,which is more significant and rapid during early stage of saturation.After 144 h of saturation,the elastic modulus decreases by 89% and 97%,and the hardness decreases by 89% and 99% for zones A and B sandstones,respectively.The results of slake durability and sonic velocity indicate that zone A sandsto ne remains 56.19% durability after 144 h of saturation,while zone B sandstone loses its durability merely after 72 h of saturation.The clay-rich sandstone starts to dissolve in water when the saturation time exceeds 144 h.The significant decreases in strength and durability of clay-rich sandstone due to water-induced softening are serious threats to tunnel stability.The improvements in the strength of surrounding rock mass by grouting and permeability by installation of drainage galleries can reduce the damage caused by water-induced softening.
基金funded by National Natural Science Foundation Project(Grant No.52274015)Opening Project Fund of Materials Service Safety Assessment Facilities(MSAF-2021-102).
文摘The increasing energy demand has pushed oil and gas exploration and development limits to extremely challenging and harsher HTHP (High Temperature and High Pressure) environments. Maintaining wellbore integrity in these environments, particularly in HPHT reservoirs with corrosive gases, presents a significant challenge. Robust risk evaluation and mitigation strategies are required to address these reservoirs' safety, economic, and environmental uncertainties. This study investigates chemo-mechanical properties degradations of class G oil well cement blended with silica fume, liquid silica, and latex when exposed to high temperature (150 °C) and high partial pressure of CO_(2) saturated brine. The result shows that these admixtures surround the cement grains and fill the interstitial spaces between the cement particles to form a dense crystal system of C–S–H. Consequently, the cement's percentage of pore voids, permeability, and the content of alkali compounds reduce, resulting in increased resistance to CO_(2) corrosion. Liquid silica, a specially prepared silica suspension, is a more effective alternative to silica fume in protecting oil well cement against CO_(2) chemical degradation. Micro-indentation analysis shows a significant deterioration in the mechanical properties of the cement, including average elastic modulus and hardness, particularly in the outer zones in direct contact with corrosive fluids. This study highlights the significance of incorporating admixtures to mitigate the effects of CO_(2) corrosion in HPHT environments and provides a valuable technique for quantitatively evaluating the mechanical-chemical degradation of cement sheath.
文摘Micro-mechanical properties of a claystone were tested after undergoing alkaline perturbation on site(Tournemire,CD borehole)for 18 years.In a saturated context and outside the excavation disturbed zone(EDZ),the claystone exhibits a 11.6-mm black rim at the cement/paste interface,which shows a different mechanical behaviour from the rest of the claystone.Three sets of measurements of elastic modulus were performed using:(i)nano-indentation tests with a constant indentation depth of 2 mm,(ii)microindentation tests with a constant indentation depth of 20 mm,and(iii)meso-compression tests with a constant displacement of 200 mm.The increase of the modulus of deformability in the black rim is between 15 GPa and 20 GPa according to the scale.Moreover,an overall decrease of the modulus of deformability from the smallest to the largest scale is observed in each zone.In view of the mineralogy and petrographic observations,higher values of modulus of deformability in the black rim are related to carbonate content and its distribution.Precipitation of cementitious carbonates as inclusions and very thin partings leads to hardening of the claystone.
文摘Research is being conducted to study the effects of particulate deposition from contaminants in coal synthesis gas (syngas) on the mechanical properties of thermal barrier coatings (TBC) employed on integrated gasification combined cycle (IGCC) turbine hot section airfoils. West Virginia University (WVU) had been working with US Department of Energy, National Energy Technology Laboratory (NETL) to simulate deposition on the pressure side of an IGCC turbine first stage vane. To model the deposition, coal fly ash was injected into the flow of a combustor facility and deposited onto TBC coated, angled film-cooled test articles in a high pressure (approximately 4 atm) and a high temperature (1560 K) environment. To investigate the interaction between the deposition and the TBC, a load-based multiple-partial unloading micro-indentation technique was used to quantitatively evaluate the mechanical properties of materials. The indentation results showed the Young’s Modulus of the ceramic top coat was higher in areas with deposition formation due to the penetration of the fly ash. This corresponds with the reduction of strain tolerance of the 7% yttria-stabilized zirconia (7YSZ) coatings.
基金the support received from the National Natural Science Foundation of China (No. 51275414)the Aeronautical Science Foundation of China (No. 2011ZE53059)
文摘By using instrumental micro-indentation technique, the microhardness and Young＇s modulus of SiC particles reinforced aluminum matrix composites were investigated with micro- compression-tester （MCT）. The micro-indentation experiments were performed with different max- imum loads, and with three loading speeds of 2.231, 4.462 and 19.368 mN/s respectively. During the investigation, matrix, particle and interface were tested by micro-indentation experiments. The results exhibit that the variations of Young＇s modulus and microhardness at particle, matrix and interface were highly dependent on the loading conditions （maximum load and loading speed） and the locations of indentation. Micro-indentation hardness experiments of matrix show the indentation size effects, i.e. the indentation hardness decreased with the indentation depth increas- ing. During the analysis, the effect of loading conditions on Young＇s modulus and microhardness were explained. Besides, the elastic-plastic properties of matrix were analyzed. The validity of cal- culated results was identified by finite element simulation. And the simulation results had been pre- liminarily analyzed from statistical aspect.
基金This work is supported by the National Natural Science Foundation of China(Grant No.51604230)the Young Elite Scientists Sponsorship Program by CAST(2017QNRC001)the Scientific Research Foundation of International Cooperation and Exchanges of Sichuan Province(Grant Nos.2017HH0061&2016HH0001).
文摘It is an important mechanical parameter for fracture toughness that affects hydraulic fracturing.Some methods such as indoor test core and logging data interpretation are commonly used to obtain fracture toughness.These methods,however,have their own limitations.Liu's method has focused the mechanical properties of shale including fracture toughness based on micro-/nano-indentation experiments.Zeng's method has pointed that the former method of calculating fracture toughness ignores the maximum holding stage in the indentation-displacement curves,they point out and correct the fracture stress intensity factor model,but the final calculation of the fracture toughness of the numerical difference is of two orders of magnitude.In this paper,micro-indentation experiments were carried out to further analyze and correct the model by collecting and analyzing Longmaxi shale cuttings.After Zeng and Liu's methods are combined,the irreversible elastic energy by energy area actually was measured.To some extent,the difference between the two kinds of fracture toughness is reduced.
基金supported by the National Natural Science Foundation of China (Nos. 10672165 and 10732050) and KJCX2-YW-M04.
文摘A new strain gradient theory which is based on energy nonlocal model is proposed in this paper, and the theory is applied to investigate the size effects in thin metallic wire torsion, ultra-thin beam bending and micro-indentation of polycrystalline copper. First, an energy nonlocal model is suggested. Second, based on the model, a new strain gradient theory is derived. Third, the new theory is applied to analyze three representative experiments.
基金supported by the National "111 Project" Foundation of China(B06024)the National Natural Science Foundation of China(11372243)+3 种基金"Zhi Gu" Innovation Program of Southern Chinathe Major InternationalJoint Research Program of China(11120101002)International Science and Technology Cooperation Program of China(2013DFG02930)partially supported by the Fundamental Research Funds for the Central Universities(NCET-12-0437)
文摘Indentation is a simple and nondestructive method to measure the mechanical properties of soft materials, such as hydrogels, elastomers and soft tissues. In this work, we have developed a micro-indentation system with high-precision to measure the mechanical properties of soft materials, where the shear modulus and Poisson＇s ratio of the materials can be obtained by analyzing the load relaxation curve. We have validated the accuracy and stability of the system by comparing the measured mechanical properties of a polyethylene glycol sample with that obtained from a commercial instrument. The mechanical properties of another typical polydimethylsiloxane sample submerged in heptane are measured by using conical and spherical indenters, respectively. The measured values of shear modulus and Poisson＇s ratio are within a reasonable range.
