Nanomaterials are known to exhibit a number of interesting physical and chemical properties for various applications,including energy conversion and storage,nanoscale electronics,sensors and actuators,photonics device...Nanomaterials are known to exhibit a number of interesting physical and chemical properties for various applications,including energy conversion and storage,nanoscale electronics,sensors and actuators,photonics devices and even for biomedical purposes.In the past decade,laser as a synthetic technique and laser as a microfabrication technique facilitated nanomaterial preparation and nanostructure construction,including the laser processing-induced carbon and non-carbon nanomaterials,hierarchical structure construction,patterning,heteroatom doping,sputtering etching,and so on.The laser-induced nanomaterials and nanostructures have extended broad applications in electronic devices,such as light–thermal conversion,batteries,supercapacitors,sensor devices,actuators and electrocatalytic electrodes.Here,the recent developments in the laser synthesis of carbon-based and non-carbon-based nanomaterials are comprehensively summarized.An extensive overview on laser-enabled electronic devices for various applications is depicted.With the rapid progress made in the research on nanomaterial preparation through laser synthesis and laser microfabrication technologies,laser synthesis and microfabrication toward energy conversion and storage will undergo fast development.展开更多
Surface structures and physicochemical properties critically influence osseointegration of titanium(Ti)implants.Previous studies have shown that the surface with both micro-and nanoscale roughness may provide multiple...Surface structures and physicochemical properties critically influence osseointegration of titanium(Ti)implants.Previous studies have shown that the surface with both micro-and nanoscale roughness may provide multiple features comparable to cell dimensions and thus efficiently regulate cell-material interaction.However,less attention has been made to further optimize the physicochemical properties(e.g.,crystalline phase)and to further improve the bioactivity of micro/nanostructured surfaces.Herein,micro/nanostructured titania surfaces with different crystalline phases(amorphous,anatase and anatase/rutile)were prepared and hydroxyapatite(HA)nanorods were deposited onto the as-prepared surfaces by a spin-assisted layer-by-layer assembly method without greatly altering the initial multi-scale morphology and wettability.The effects of crystalline phase,chemical composition and wettability on osteoblast response were investigated.It is noted that all the micro/nanostructured surfaces with/without HA modification presented superamphiphilic.The activities of MC3T3-E1 cells suggested that the proliferation trend on the micro/nanostructured surfaces was greatly influenced by different crystalline phases,and the highest proliferation rate was obtained on the anatase/rutile surface,followed by the anatase;but the cell differentiation and extracellular matrix mineralization were almost the same among them.After ultrathin HA modification on the micro/nanostructured surfaces with different crystalline phases,it exhibited similar proliferation trend as the original surfaces;however,the cell differentiation and extracellular matrix mineralization were significantly improved.The results indicate that the introduction of ultrathin HA to the micro/nanostructured surfaces with optimized crystalline phase benefits cell proliferation,differentiation and maturation,which suggests a favorable biomimetic microenvironment and provides the potential for enhanced implant osseointegration in vivo.展开更多
Bioinspired superhydrophobic surfaces have attracted many industrial and academic interests in recent years.Inspired by unique superhydrophobicity and anisotropic friction properties of snake scale surfaces,this study...Bioinspired superhydrophobic surfaces have attracted many industrial and academic interests in recent years.Inspired by unique superhydrophobicity and anisotropic friction properties of snake scale surfaces,this study explores the feasibility to produce a bionic superhydrophobic stainless steel surface via laser precision engineering,which allows the realization of directional superhydrophobicity and dynamic control of its water transportation.Dynamic mechanism of water sliding on hierarchical snake scale structures is studied,which is the key to reproduce artificially bioinspired multifunctional materials with great potentials to be used for water harvesting,droplet manipulation,pipeline transportation,and vehicle acceleration.展开更多
In this study,we demonstrate a technique termed underwater persistent bubble assisted femtosecond laser ablation in liquids(UPB-fs-LAL)that can greatly expand the boundaries of surface micro/nanostructuring through la...In this study,we demonstrate a technique termed underwater persistent bubble assisted femtosecond laser ablation in liquids(UPB-fs-LAL)that can greatly expand the boundaries of surface micro/nanostructuring through laser ablation because of its capability to create concentric circular macrostructures with millimeter-scale tails on silicon substrates.Long-tailed macrostructures are composed of layered fan-shaped(central angles of 45°–141°)hierarchical micro/nanostructures,which are produced by fan-shaped beams refracted at the mobile bubble interface(.50°light tilt,referred to as the vertical incident direction)during UPB-fs-LAL line-by-line scanning.Marangoni flow generated during UPB-fs-LAL induces bubble movements.Fast scanning(e.g.1mms−1)allows a long bubble movement(as long as 2mm),while slow scanning(e.g.0.1mms−1)prevents bubble movements.When persistent bubbles grow considerably(e.g.hundreds of microns in diameter)due to incubation effects,they become sticky and can cause both gas-phase and liquidphase laser ablation in the central and peripheral regions of the persistent bubbles.This generates low/high/ultrahigh spatial frequency laser-induced periodic surface structures(LSFLs/HSFLs/UHSFLs)with periods of 550–900,100–200,40–100 nm,which produce complex hierarchical surface structures.A period of 40 nm,less than 1/25th of the laser wavelength(1030 nm),is the finest laser-induced periodic surface structures(LIPSS)ever created on silicon.The NIR-MIR reflectance/transmittance of fan-shaped hierarchical structures obtained by UPB-fs-LAL at a small line interval(5μm versus 10μm)is extremely low,due to both their extremely high light trapping capacity and absorbance characteristics,which are results of the structures’additional layers and much finer HSFLs.In the absence of persistent bubbles,only grooves covered with HSFLs with periods larger than 100 nm are produced,illustrating the unique attenuation abilities of laser properties(e.g.repetition rate,energy,incident angle,etc)by persistent bub展开更多
基金This work was supported by Taishan Scholars Project Special Funds(tsqn201812083)Natural Science Foundation of Shandong Province(ZR2019YQ20,2019JMRH0410,ZR2019BB001)the National Natural Science Foundation of China(51972147,51902132,52022037).
文摘Nanomaterials are known to exhibit a number of interesting physical and chemical properties for various applications,including energy conversion and storage,nanoscale electronics,sensors and actuators,photonics devices and even for biomedical purposes.In the past decade,laser as a synthetic technique and laser as a microfabrication technique facilitated nanomaterial preparation and nanostructure construction,including the laser processing-induced carbon and non-carbon nanomaterials,hierarchical structure construction,patterning,heteroatom doping,sputtering etching,and so on.The laser-induced nanomaterials and nanostructures have extended broad applications in electronic devices,such as light–thermal conversion,batteries,supercapacitors,sensor devices,actuators and electrocatalytic electrodes.Here,the recent developments in the laser synthesis of carbon-based and non-carbon-based nanomaterials are comprehensively summarized.An extensive overview on laser-enabled electronic devices for various applications is depicted.With the rapid progress made in the research on nanomaterial preparation through laser synthesis and laser microfabrication technologies,laser synthesis and microfabrication toward energy conversion and storage will undergo fast development.
基金the Ministry of Science and Technology of China(grant No.2016YFC1100300)the National Natural Science Foundation of China(grant No.21773199,51571169).
文摘Surface structures and physicochemical properties critically influence osseointegration of titanium(Ti)implants.Previous studies have shown that the surface with both micro-and nanoscale roughness may provide multiple features comparable to cell dimensions and thus efficiently regulate cell-material interaction.However,less attention has been made to further optimize the physicochemical properties(e.g.,crystalline phase)and to further improve the bioactivity of micro/nanostructured surfaces.Herein,micro/nanostructured titania surfaces with different crystalline phases(amorphous,anatase and anatase/rutile)were prepared and hydroxyapatite(HA)nanorods were deposited onto the as-prepared surfaces by a spin-assisted layer-by-layer assembly method without greatly altering the initial multi-scale morphology and wettability.The effects of crystalline phase,chemical composition and wettability on osteoblast response were investigated.It is noted that all the micro/nanostructured surfaces with/without HA modification presented superamphiphilic.The activities of MC3T3-E1 cells suggested that the proliferation trend on the micro/nanostructured surfaces was greatly influenced by different crystalline phases,and the highest proliferation rate was obtained on the anatase/rutile surface,followed by the anatase;but the cell differentiation and extracellular matrix mineralization were almost the same among them.After ultrathin HA modification on the micro/nanostructured surfaces with different crystalline phases,it exhibited similar proliferation trend as the original surfaces;however,the cell differentiation and extracellular matrix mineralization were significantly improved.The results indicate that the introduction of ultrathin HA to the micro/nanostructured surfaces with optimized crystalline phase benefits cell proliferation,differentiation and maturation,which suggests a favorable biomimetic microenvironment and provides the potential for enhanced implant osseointegration in vivo.
基金This work was supported by the Advanced Remanufacturing and Technology Centre(ARTC)under its RIE2020 Advanced Manufacturing and Engineering(AME)IAF PP Grant(No.A19C2a0019).
文摘Bioinspired superhydrophobic surfaces have attracted many industrial and academic interests in recent years.Inspired by unique superhydrophobicity and anisotropic friction properties of snake scale surfaces,this study explores the feasibility to produce a bionic superhydrophobic stainless steel surface via laser precision engineering,which allows the realization of directional superhydrophobicity and dynamic control of its water transportation.Dynamic mechanism of water sliding on hierarchical snake scale structures is studied,which is the key to reproduce artificially bioinspired multifunctional materials with great potentials to be used for water harvesting,droplet manipulation,pipeline transportation,and vehicle acceleration.
文摘In this study,we demonstrate a technique termed underwater persistent bubble assisted femtosecond laser ablation in liquids(UPB-fs-LAL)that can greatly expand the boundaries of surface micro/nanostructuring through laser ablation because of its capability to create concentric circular macrostructures with millimeter-scale tails on silicon substrates.Long-tailed macrostructures are composed of layered fan-shaped(central angles of 45°–141°)hierarchical micro/nanostructures,which are produced by fan-shaped beams refracted at the mobile bubble interface(.50°light tilt,referred to as the vertical incident direction)during UPB-fs-LAL line-by-line scanning.Marangoni flow generated during UPB-fs-LAL induces bubble movements.Fast scanning(e.g.1mms−1)allows a long bubble movement(as long as 2mm),while slow scanning(e.g.0.1mms−1)prevents bubble movements.When persistent bubbles grow considerably(e.g.hundreds of microns in diameter)due to incubation effects,they become sticky and can cause both gas-phase and liquidphase laser ablation in the central and peripheral regions of the persistent bubbles.This generates low/high/ultrahigh spatial frequency laser-induced periodic surface structures(LSFLs/HSFLs/UHSFLs)with periods of 550–900,100–200,40–100 nm,which produce complex hierarchical surface structures.A period of 40 nm,less than 1/25th of the laser wavelength(1030 nm),is the finest laser-induced periodic surface structures(LIPSS)ever created on silicon.The NIR-MIR reflectance/transmittance of fan-shaped hierarchical structures obtained by UPB-fs-LAL at a small line interval(5μm versus 10μm)is extremely low,due to both their extremely high light trapping capacity and absorbance characteristics,which are results of the structures’additional layers and much finer HSFLs.In the absence of persistent bubbles,only grooves covered with HSFLs with periods larger than 100 nm are produced,illustrating the unique attenuation abilities of laser properties(e.g.repetition rate,energy,incident angle,etc)by persistent bub
