The two most critical factors in promoting the clinical translation of magnesium(Mg)are reducing its degradation rate and improving its osteogenesis.In this study,a Ca-deficient hydroxyapatite(CDHA)/MgF_(2)bilayer coa...The two most critical factors in promoting the clinical translation of magnesium(Mg)are reducing its degradation rate and improving its osteogenesis.In this study,a Ca-deficient hydroxyapatite(CDHA)/MgF_(2)bilayer coating was prepared on high-purity magnesium(HP Mg)rods by fluorination and hydrothermal treatment.Scanning electron microscope showed that the thickness of the bilayer coating was 3.78 lm and that the surface morphology was nanoscale.In an in vivo experiment on femoral condyle defects in rabbits,the serum magnesium ion levels of rabbits were always in the normal range after surgery,and the liver and kidney functions were not abnormal,which indicated that the CDHA/MgF_(2)bilayer coating has good biosafety.Micro-CT showed that the CDHA/MgF_(2)bilayer coating significantly reduced the degradation rate of the HP Mg rods and enhanced the promotion of bone formation.Hard tissue sections showed that the CDHA/MgF_(2)bilayer coating gave the bone tissue a tight contact interface with the HP Mg rod and improved the bone mass.Immunohistochemistry showed that the expression of vascular endothelial growth factor and BMP-2 was more obvious.These results confirm that the CDHA/MgF_(2)bilayer coating can improve the properties of HP Mg and provide a basis for the further transformation of HP Mg in the future.It also provides a new reference for the surface modification of magnesiummetal.展开更多
The practical applications of aqueous Zn metal batteries are currently restricted by the inherent drawbacks of Zn such as the hydrogen evolution reaction,sluggish kinetics,and dendrite formation.To address these probl...The practical applications of aqueous Zn metal batteries are currently restricted by the inherent drawbacks of Zn such as the hydrogen evolution reaction,sluggish kinetics,and dendrite formation.To address these problems,herein,a limitedly Zn-doped MgF_(2)interphase comprising an upper region of pure,porous MgF_(2)and a lower region of gradient Zn-doped MgF_(2)is achieved via radio frequency sputtering technique.The porous MgF_(2)region is a polar insulator whose high corrosion resistance facilitates the de-solvation of the solvated Zn ions and suppression of hydrogen evolution,resulting in Zn metal electrodes with a low interfacial resistance.The Zn-doped MgF_(2)region facilitates fast transfer kinetics and homogeneous deposition of Zn ions owing to the interfacial polarization between the Zn dopant and MgF_(2)matrix,and the high concentration of the Zn dopant on the surface of the metal substrate as fine nuclei.Consequently,a symmetric cell incorporating the proposed Zn metal exhibits low overpotentials of~27.2 and~99.7 mV without Zn dendrites over 250 to 8000 cycles at current densities of 1.0 and 10.0 mA cm−2,respectively.The developed Zn/MnO2 full cell exhibits superior capacity retentions of 97.5%and 84.0%with average Coulombic efficiencies of 99.96%after 1000 and 3000 cycles,respectively.展开更多
To understand the anisotropy dependence of the damage evolution and material removal during the machining process of MgF_(2) single crystals,nanoscratch tests of MgF_(2) single crystals with different crystal planes a...To understand the anisotropy dependence of the damage evolution and material removal during the machining process of MgF_(2) single crystals,nanoscratch tests of MgF_(2) single crystals with different crystal planes and directions were systematically performed,and surface morphologies of the scratched grooves under different conditions were analyzed.The experimental results indicated that anisotropy considerably affected the damage evolution in the machining process of MgF_(2) single crystals.A stress field model induced by the scratch was developed by considering the anisotropy,which indicated that during the loading process,median cracks induced by the tensile stress initiated and propagated at the front of the indenter.Lateral cracks induced by tensile stress initiated and propagated on the subsurface during the unloading process.In addition,surface radial cracks induced by the tensile stress were easily generated during the unloading process.The stress change led to the deflection of the propagation direction of lateral cracks.Therefore,the lateral cracks propagated to the workpiece surface,resulting in brittle removal in the form of chunk chips.The plastic deformation parameter indicated that the more the slip systems were activated,the more easily the plastic deformation occurred.The cleavage fracture parameter indicated that the cracks propagated along the activated cleavage planes,and the brittle chunk removal was owing to the subsurface cleavage cracks propagating to the crystal surface.Under the same processing parameters,the scratch of the(001)crystal plane along the[100]crystal-orientation was found to be the most conducive to achieving plastic machining of MgF_(2) single crystals.The theoretical results agreed well with the experimental results,which will not only enhance the understanding of the anisotropy dependence of the damage evolution and removal process during the machining of MgF_(2) crystals,but also provide a theoretical foundation for achieving the high-efficiency and low-damage processin展开更多
Mechanoluminescent(ML)materials can directly convert external mechanical stimulation into light without the need for excitation from other forms of energy,such as light or electricity.This alluring characteristic make...Mechanoluminescent(ML)materials can directly convert external mechanical stimulation into light without the need for excitation from other forms of energy,such as light or electricity.This alluring characteristic makes ML materials potentially applicable in a wide range of areas,including dynamic imaging of force,advanced displays,information code,storage,and anti-counterfeiting encryption.However,current reproducible ML materials are restricted to sulfide-and oxide-based materials.In addition,most of the reported ML materials require pre-irradiation with ultraviolet(UV)lamps or other light sources,which seriously hinders their practical applications.Here,we report a novel ML material,MgF_(2):Mn^(2+),which emits bright red light under an external dynamic force without the need for pre-charging with UV light.The luminescence properties were systematically studied,and the piezophotonic application was demonstrated.More interestingly,unlike the well-known zinc sulfide ML complexes reported previously,a highly transparent ML film was successfully fabricated by incorporating MgF_(2):Mn^(2+)into polydimethylsiloxane(PDMS)matrices.This film is expected to find applications in advanced flexible optoelectronics such as integrated piezophotonics,artificial skin,athletic analytics in sports.展开更多
基金supported by Dalian Health Commission,medical key specialty of Dengfeng project[grant number(2021)243]National Orthopedics and Sports Rehabilitation Clinical Research Center Innovation Fund(2021-NCRC-CXJJ-ZH-28).
文摘The two most critical factors in promoting the clinical translation of magnesium(Mg)are reducing its degradation rate and improving its osteogenesis.In this study,a Ca-deficient hydroxyapatite(CDHA)/MgF_(2)bilayer coating was prepared on high-purity magnesium(HP Mg)rods by fluorination and hydrothermal treatment.Scanning electron microscope showed that the thickness of the bilayer coating was 3.78 lm and that the surface morphology was nanoscale.In an in vivo experiment on femoral condyle defects in rabbits,the serum magnesium ion levels of rabbits were always in the normal range after surgery,and the liver and kidney functions were not abnormal,which indicated that the CDHA/MgF_(2)bilayer coating has good biosafety.Micro-CT showed that the CDHA/MgF_(2)bilayer coating significantly reduced the degradation rate of the HP Mg rods and enhanced the promotion of bone formation.Hard tissue sections showed that the CDHA/MgF_(2)bilayer coating gave the bone tissue a tight contact interface with the HP Mg rod and improved the bone mass.Immunohistochemistry showed that the expression of vascular endothelial growth factor and BMP-2 was more obvious.These results confirm that the CDHA/MgF_(2)bilayer coating can improve the properties of HP Mg and provide a basis for the further transformation of HP Mg in the future.It also provides a new reference for the surface modification of magnesiummetal.
基金Project(61871389)supported by the National Natural Science Foundation of ChinaProject(22-ZZCX-007)supported by the Research Major Project of the National University of Defense Technology,China+3 种基金Project(1908085MF222)supported by the Anhui Province Natural Science Foundation,ChinaProject(AHL2021ZR04)supported by Foundation of the Anhui Laboratory of Advanced Laser Technology,ChinaProject(SKL2022ZR10)supported by Foundation of the State Key Laboratory of Pulsed Power Laser Technology,ChinaProject(JCVKY2023230C010)supported by the National Defense Basic Scientific Research Program of China。
基金supported by research grants from the National Research Foundation(NRF-2019H1D3A1A01069779)funded by the Ministry of Science and ICT,Republic of Korea,and by the Institutional Program(2E31863)and Bridge Program-KIST(2V09284).
文摘The practical applications of aqueous Zn metal batteries are currently restricted by the inherent drawbacks of Zn such as the hydrogen evolution reaction,sluggish kinetics,and dendrite formation.To address these problems,herein,a limitedly Zn-doped MgF_(2)interphase comprising an upper region of pure,porous MgF_(2)and a lower region of gradient Zn-doped MgF_(2)is achieved via radio frequency sputtering technique.The porous MgF_(2)region is a polar insulator whose high corrosion resistance facilitates the de-solvation of the solvated Zn ions and suppression of hydrogen evolution,resulting in Zn metal electrodes with a low interfacial resistance.The Zn-doped MgF_(2)region facilitates fast transfer kinetics and homogeneous deposition of Zn ions owing to the interfacial polarization between the Zn dopant and MgF_(2)matrix,and the high concentration of the Zn dopant on the surface of the metal substrate as fine nuclei.Consequently,a symmetric cell incorporating the proposed Zn metal exhibits low overpotentials of~27.2 and~99.7 mV without Zn dendrites over 250 to 8000 cycles at current densities of 1.0 and 10.0 mA cm−2,respectively.The developed Zn/MnO2 full cell exhibits superior capacity retentions of 97.5%and 84.0%with average Coulombic efficiencies of 99.96%after 1000 and 3000 cycles,respectively.
基金supported by the National Natural Science Foundation of China (52005134&51975154)China Postdoctoral Science Foundation (2022T150163, 2020M670901)+4 种基金Self-Planned Task (No. SKLRS202214B) of State Key Laboratory of Robotics and System (HIT)Heilongjiang Postdoctoral Fund (LBH-Z20016)Shenzhen Science and Technology Program (GJHZ20210705142804012)Fundamental Research Funds for the Central Universities(FRFCU5710051122)Open Fund of ZJUT Xinchang Research Institute
文摘To understand the anisotropy dependence of the damage evolution and material removal during the machining process of MgF_(2) single crystals,nanoscratch tests of MgF_(2) single crystals with different crystal planes and directions were systematically performed,and surface morphologies of the scratched grooves under different conditions were analyzed.The experimental results indicated that anisotropy considerably affected the damage evolution in the machining process of MgF_(2) single crystals.A stress field model induced by the scratch was developed by considering the anisotropy,which indicated that during the loading process,median cracks induced by the tensile stress initiated and propagated at the front of the indenter.Lateral cracks induced by tensile stress initiated and propagated on the subsurface during the unloading process.In addition,surface radial cracks induced by the tensile stress were easily generated during the unloading process.The stress change led to the deflection of the propagation direction of lateral cracks.Therefore,the lateral cracks propagated to the workpiece surface,resulting in brittle removal in the form of chunk chips.The plastic deformation parameter indicated that the more the slip systems were activated,the more easily the plastic deformation occurred.The cleavage fracture parameter indicated that the cracks propagated along the activated cleavage planes,and the brittle chunk removal was owing to the subsurface cleavage cracks propagating to the crystal surface.Under the same processing parameters,the scratch of the(001)crystal plane along the[100]crystal-orientation was found to be the most conducive to achieving plastic machining of MgF_(2) single crystals.The theoretical results agreed well with the experimental results,which will not only enhance the understanding of the anisotropy dependence of the damage evolution and removal process during the machining of MgF_(2) crystals,but also provide a theoretical foundation for achieving the high-efficiency and low-damage processin
基金the financial support for this work from the National Natural Science Foundation of China(Nos.U1764254,51871166)the Tianjin Natural Science Foundation,China(No.20JCYBJC00620)。
基金financial support from the Advanced Talents Incubation Program of Hebei University (521100221006)financial support from the National Natural Science Foundation of China (11974097)+2 种基金the Natural Science Foundation of Hebei Province (A2019201073)support from the National Natural Science Foundation of China (61875136)the Fundamental Research Project of Guangdong Province (2020A1515011315)
文摘Mechanoluminescent(ML)materials can directly convert external mechanical stimulation into light without the need for excitation from other forms of energy,such as light or electricity.This alluring characteristic makes ML materials potentially applicable in a wide range of areas,including dynamic imaging of force,advanced displays,information code,storage,and anti-counterfeiting encryption.However,current reproducible ML materials are restricted to sulfide-and oxide-based materials.In addition,most of the reported ML materials require pre-irradiation with ultraviolet(UV)lamps or other light sources,which seriously hinders their practical applications.Here,we report a novel ML material,MgF_(2):Mn^(2+),which emits bright red light under an external dynamic force without the need for pre-charging with UV light.The luminescence properties were systematically studied,and the piezophotonic application was demonstrated.More interestingly,unlike the well-known zinc sulfide ML complexes reported previously,a highly transparent ML film was successfully fabricated by incorporating MgF_(2):Mn^(2+)into polydimethylsiloxane(PDMS)matrices.This film is expected to find applications in advanced flexible optoelectronics such as integrated piezophotonics,artificial skin,athletic analytics in sports.
