Deformation can change the transition pathway of materials under high pressure,thus significantly affects physical and chemical properties of matters.However,accurate pressure calibration under deformation is challeng...Deformation can change the transition pathway of materials under high pressure,thus significantly affects physical and chemical properties of matters.However,accurate pressure calibration under deformation is challenging and thereby causes relatively large pressure uncertainties in deformation experiments,resulting in the synthesis of complex multiphase materials.Here,pressure generations of three types of deformation assemblies were well calibrated in a Walker-type largevolume press(LVP)by electrical resistance measurements combined with finite element simulations(FESs).Hard Al_(2)O_(3) or diamond pistons in shear and uniaxial deformation assemblies significantly increase the efficiency of pressure generation compared with the conventional quasi-hydrostatic assembly.The uniaxial deformation assembly using flat diamond pistons possesses the highest efficiency in these deformation assemblies.This finding is further confirmed by stress distribution analysis based on FESs.With this deformation assembly,we found shear can effectively promote the transformation of C60 into diamond under high pressure and realized the synthesis of phase-pure diamond at relatively moderate pressure and temperature conditions.The present developed techniques will help improve pressure efficiencies in LVP and explore the new physical and chemical properties of materials under deformation in both science and technology.展开更多
For samples in the gaseous state at room temperature and ambient pressure,mature technology has been developed to encapsulate them in a diamond anvil cell(DAC).However,the large volume press(LVP)can only treat samples...For samples in the gaseous state at room temperature and ambient pressure,mature technology has been developed to encapsulate them in a diamond anvil cell(DAC).However,the large volume press(LVP)can only treat samples with starting materials in solid or liquid form.We have achieved stable encapsulation and reaction treatment of carbon dioxide in a centimeter sized sample chamber for a long time(over 10 min)under conditions of temperature higher than 1200C and pressure over 5 GPa through the use of integrated low-temperature freezing and rapid compression sealing method for LVP cell assemblies.This technology can also be applied to the packaging of other gaseous or liquid samples,such as ammonia,sulfur dioxide,water,etc.in LVP devices.展开更多
Pressure allows the precise tuning of a fundamental parameter, the interatomic distance, which controls the electronic structure and virtually all interatomic interactions that determine material properties. Hence, pr...Pressure allows the precise tuning of a fundamental parameter, the interatomic distance, which controls the electronic structure and virtually all interatomic interactions that determine material properties. Hence, pressure tuning is an effective tool in the search for new materials with enhanced properties. To realize pressure tuning on matter, large-volume press （LVP） apparatuses have been widely used not only to synthesize novel materials but also to implement the in situ measurement of physical properties. Herein, we introduce the LVP apparatuses, including belt-type, cubic anvil, and 6-8 type multi-anvil, that will be constructed at the Synergetic Extreme Condition User Facility （SECUF） at Jilin University. Typically, cell volumes of 1000 mm3 can be obtained at 20 GPa in a belt-type apparatus that is significantly larger than that obtained in a 6-8 type multi-anvil apparatus at the same pressure. Furthermore, the in situ measurement of physical prop- erties, including thermological, electrical, and mechanical behaviors, is coupled to these LVP apparatuses. Some typical results of both synthetic experiments and in situ measurements obtained from the LVP apparatuses are also reviewed.展开更多
In this paper, a new of oxygen fugaeity controltechnique that can be widely applied to in-situ measurement of the grain interior electrical conductivities of minerals and rocks is presented for high temperature and hi...In this paper, a new of oxygen fugaeity controltechnique that can be widely applied to in-situ measurement of the grain interior electrical conductivities of minerals and rocks is presented for high temperature and high pressure. Inside the sample assembly, a metal and corresponding metal oxide form a solid oxygen buffer. The principle of this technique is to randomly monitor and adjust oxygen fugacity in the large-volume multi-anvil press by changing the types of solid oxygen buffer, metal shielding case and electrodes. At a pressure of up to 5.0 GPa and a temperature of up to 1423 K, the electrical conductivities of the dry peridotite are tested under the conditions of different oxygen fugacities. By virtue of this new technique, more and more reasonable and accurate laboratory electrical property data will be successfully obtained under controlled thermodynamic conditions.展开更多
基金the National Natural Science Foundation of China(Grant Nos.42272041,41902034,52302043,12304015,52302043,and 12011530063)the National Major Science Facility Synergetic Extreme Condition User Facility Achievement Transformation Platform Construction(Grant No.2021FGWCXNLJSKJ01)+2 种基金the China Postdoctoral Science Foundation(Grant Nos.2022M720054 and 2023T160257)the National Key Research and Development Program of China(Grant No.2022YFB3706602)the Jilin Univer-sity High-level Innovation Team Foundation,China(Grant No.2021TD-05).
文摘Deformation can change the transition pathway of materials under high pressure,thus significantly affects physical and chemical properties of matters.However,accurate pressure calibration under deformation is challenging and thereby causes relatively large pressure uncertainties in deformation experiments,resulting in the synthesis of complex multiphase materials.Here,pressure generations of three types of deformation assemblies were well calibrated in a Walker-type largevolume press(LVP)by electrical resistance measurements combined with finite element simulations(FESs).Hard Al_(2)O_(3) or diamond pistons in shear and uniaxial deformation assemblies significantly increase the efficiency of pressure generation compared with the conventional quasi-hydrostatic assembly.The uniaxial deformation assembly using flat diamond pistons possesses the highest efficiency in these deformation assemblies.This finding is further confirmed by stress distribution analysis based on FESs.With this deformation assembly,we found shear can effectively promote the transformation of C60 into diamond under high pressure and realized the synthesis of phase-pure diamond at relatively moderate pressure and temperature conditions.The present developed techniques will help improve pressure efficiencies in LVP and explore the new physical and chemical properties of materials under deformation in both science and technology.
基金supported by the National Key R&D Program of China(Grant No.2023YFA1406200).
文摘For samples in the gaseous state at room temperature and ambient pressure,mature technology has been developed to encapsulate them in a diamond anvil cell(DAC).However,the large volume press(LVP)can only treat samples with starting materials in solid or liquid form.We have achieved stable encapsulation and reaction treatment of carbon dioxide in a centimeter sized sample chamber for a long time(over 10 min)under conditions of temperature higher than 1200C and pressure over 5 GPa through the use of integrated low-temperature freezing and rapid compression sealing method for LVP cell assemblies.This technology can also be applied to the packaging of other gaseous or liquid samples,such as ammonia,sulfur dioxide,water,etc.in LVP devices.
文摘Pressure allows the precise tuning of a fundamental parameter, the interatomic distance, which controls the electronic structure and virtually all interatomic interactions that determine material properties. Hence, pressure tuning is an effective tool in the search for new materials with enhanced properties. To realize pressure tuning on matter, large-volume press （LVP） apparatuses have been widely used not only to synthesize novel materials but also to implement the in situ measurement of physical properties. Herein, we introduce the LVP apparatuses, including belt-type, cubic anvil, and 6-8 type multi-anvil, that will be constructed at the Synergetic Extreme Condition User Facility （SECUF） at Jilin University. Typically, cell volumes of 1000 mm3 can be obtained at 20 GPa in a belt-type apparatus that is significantly larger than that obtained in a 6-8 type multi-anvil apparatus at the same pressure. Furthermore, the in situ measurement of physical prop- erties, including thermological, electrical, and mechanical behaviors, is coupled to these LVP apparatuses. Some typical results of both synthetic experiments and in situ measurements obtained from the LVP apparatuses are also reviewed.
基金supported by the Knowledge Innovation Key Orientation Project of the Chinese Academy of Sciences (CAS) (Grant Nos. KZCX2-YW-Q08-3-4,KZCX2-YW-QN110,and KZCX3-SW-124)Large-scale Scientific Apparatus Development Program of CAS (Grant No. YZ200720)+1 种基金the National High Technology Research and Development Program of China (Grant No. 2006AA09Z205)the National Natural Science Foundation of China (Grant Nos. 40974051,40704010 and 40573046)
文摘In this paper, a new of oxygen fugaeity controltechnique that can be widely applied to in-situ measurement of the grain interior electrical conductivities of minerals and rocks is presented for high temperature and high pressure. Inside the sample assembly, a metal and corresponding metal oxide form a solid oxygen buffer. The principle of this technique is to randomly monitor and adjust oxygen fugacity in the large-volume multi-anvil press by changing the types of solid oxygen buffer, metal shielding case and electrodes. At a pressure of up to 5.0 GPa and a temperature of up to 1423 K, the electrical conductivities of the dry peridotite are tested under the conditions of different oxygen fugacities. By virtue of this new technique, more and more reasonable and accurate laboratory electrical property data will be successfully obtained under controlled thermodynamic conditions.
