Contact electrification is a direct triboelectrification method for producing current through charge transfer when two different differentiated materials have brought into contact.For the first time,we developed a sim...Contact electrification is a direct triboelectrification method for producing current through charge transfer when two different differentiated materials have brought into contact.For the first time,we developed a simple triboelectric nanogenerator(TENG)where the electronic charges were realized through contact separation mode between sand-polished Kapton(SPK)and Al surface.Here,we demonstrated the energetic interfacial contact between these surfaces and observed satisfactory output performance.The novel SPK-TENG produced 40 V and 2.8μA,of open-circuit voltages(V_(oc))and short-circuit currents(Isc)at 4 Hz,respectively.Mainly,the SPK-TENG was dramatically increased up the performance of TENG,up to 40% of V_(oc) and 42% of I_(sc),with respect to the Kapton film because the mobility of electrons is very high on the device surface compared to the other pristine Kapton film.The fabricated SPK-TENGs were good candidates for satisfying the need for alternative contact separation mode TENGs.展开更多
The TPR experiments and DTA TG results showed that catalyst Pt Sn K/Al 2O 3 had a better selectivity(94 60%) and yield(48 71%) for isobutane dehydrogenation than Pt Sn/Al 2O 3.
基金supported by the National Research Foundation of Korea(NRF)grant funded by the Korean government(MSIP No.2017R1A2B2011730,No.2018R1A6A1A03024509 and No.2019R1A2C1011113).
文摘Contact electrification is a direct triboelectrification method for producing current through charge transfer when two different differentiated materials have brought into contact.For the first time,we developed a simple triboelectric nanogenerator(TENG)where the electronic charges were realized through contact separation mode between sand-polished Kapton(SPK)and Al surface.Here,we demonstrated the energetic interfacial contact between these surfaces and observed satisfactory output performance.The novel SPK-TENG produced 40 V and 2.8μA,of open-circuit voltages(V_(oc))and short-circuit currents(Isc)at 4 Hz,respectively.Mainly,the SPK-TENG was dramatically increased up the performance of TENG,up to 40% of V_(oc) and 42% of I_(sc),with respect to the Kapton film because the mobility of electrons is very high on the device surface compared to the other pristine Kapton film.The fabricated SPK-TENGs were good candidates for satisfying the need for alternative contact separation mode TENGs.
文摘The TPR experiments and DTA TG results showed that catalyst Pt Sn K/Al 2O 3 had a better selectivity(94 60%) and yield(48 71%) for isobutane dehydrogenation than Pt Sn/Al 2O 3.
