Long-standing controversy persists over the presence and role of iron-rich melts in the formation of volcanic rock-hosted iron deposits. Conjugate iron-rich and silica-rich melt inclusions observed in thin-sections ar...Long-standing controversy persists over the presence and role of iron-rich melts in the formation of volcanic rock-hosted iron deposits. Conjugate iron-rich and silica-rich melt inclusions observed in thin-sections are considered as direct evidence for the presence of iron-rich melt, yet unequivocal outcrop-scale evidence of iron-rich melts are still lacking in volcanic rock-hosted iron deposits. Submarine volcanic rock-hosted iron deposits, which are mainly distributed in the western and eastern Tianshan Mountains in Xinjiang, are important resources of iron ores in China, but it remains unclear whether iron-rich melts have played a role in the mineralization of such iron ores. In this study, we observed abundant iron-rich agglomerates in the brecciated andesite lava of the Heijianshan submarine volcanic rock-hosted iron deposit, Eastern Tianshan, China. The iron-rich agglomerates occur as irregular and angular masses filling fractures of the host brecciated andesite lava. They show concentric potassic alteration with silicification or epidotization rims, indicative of their formation after the wall rocks. The iron-rich agglomerates have porphyritic and hyalopilitic textures, and locally display chilled margins in the contact zone with the host rocks. These features cannot be explained by hydrothermal replacement of wall rocks （brecciated andesite lava） which is free of vesicle and amygdale, rather they indicate direct crystallization of the iron-rich agglomerates from iron-rich melts. We propose that the iron-rich agglomerates were formed by open-space filling of volatile-rich iron-rich melt in fractures of the brecciated andesite lava. The iron-rich agglomerates are compositionally similar to the wall-rock brecciated andesite lava, but have much larger variation. Based on mineral assemblages, the iron-rich agglomerates are subdivided into five types, i.e., albite-magnetite type, albite-K-feldspar- magnetite type, K-feldspar-magnetite type, epidote-magnetite type and quartz-magnetite type, representing that展开更多
The effect of the melt holding temperature on the morphological evolution and sedimentation behavior of iron-rich intermetallics in Al-7.0 Si-1.0 Fe-1.2 Mn-0.25 Mg alloy was investigated using an optical microscope,sc...The effect of the melt holding temperature on the morphological evolution and sedimentation behavior of iron-rich intermetallics in Al-7.0 Si-1.0 Fe-1.2 Mn-0.25 Mg alloy was investigated using an optical microscope,scanning electron microscope and differential thermal analyzer.The results show that as the holding temperature decreases,the morphologies of the primary iron-rich phase in matrix change from star-like to polygonal,and the number of the primary phases gradually decreases and disappears at 615°C.Finally,the Chinese script phases with small size,high compact and uniform distribution are obtained.In contrast,the primary iron-rich phases in slag transform into a coarser polygonal shape with lower roundness,and some of them have hollow structures.Furthermore,the area fraction of intermetallics and Fe content in the matrix decrease gradually due to the formation and growth of sludge and subsequent natural sedimentation during melt holding.With the decrease of holding temperature,the main factors hindering the settlement of the primary phases are morphology,size,and density in turn.展开更多
A study has been carried out on the feasibility of using high iron content wastes, generated during steel making, as a raw material for the production of glass ceramic. The iron-rich wastes were mixed and melted in di...A study has been carried out on the feasibility of using high iron content wastes, generated during steel making, as a raw material for the production of glass ceramic. The iron-rich wastes were mixed and melted in different proportions with soda-lime glass cullet and sand. The devitrification of the parent glasses produced from the different mixtures was investigated using differential thermal analysis, X-ray diffraction, and scanning electron microscopy. The mechanical properties of the glass-ceramic were assessed by hardness and indentation fracture toughness measurement. A glass ceramic with mixture of 60 wt pct iron-rich wastes, 25 wt pct sand, and 15 wt pct glass cullet exhibited the best combination of properties, namely, hardness 7.9 CPa and fracture toughness 3.75 MPa·m^1/2, for the sake of containing magnetite in marked dendritic morphology. These new hard glass ceramics are candidate materials for wear resistant tiles and paving for heavy industrial floors.展开更多
Increasing iron content has been witnessed an essential method to improve the remanence of 2:17-type Sm-Co-Fe-Cu-Zr magnets,however,the inferior squareness factor accompanied with the increased iron content turns into...Increasing iron content has been witnessed an essential method to improve the remanence of 2:17-type Sm-Co-Fe-Cu-Zr magnets,however,the inferior squareness factor accompanied with the increased iron content turns into a neck sticking problem.In this work,the grain boundary optimization induced substantial squareness enhancement from 63.4%to 91.4%,and consequently an excellent maximum energy product of 32.63 MGOe have been achieved in iron-rich Sm-Co-Fe-Cu-Zr magnets via tuning solution process.It is clearly revealed that the grain boundary(GB)phases as well as the micro-twins’density in grain interiors can be controlled and interprets the enhancement mechanism of squareness.展开更多
This study investigated the influence of graded Zn content on the evolution of precipitated and iron-rich phases and grain struc-ture of the alloys,designed and developed the Al–8.0Zn–1.5Mg–1.5Cu–0.2Fe(wt%)alloy w...This study investigated the influence of graded Zn content on the evolution of precipitated and iron-rich phases and grain struc-ture of the alloys,designed and developed the Al–8.0Zn–1.5Mg–1.5Cu–0.2Fe(wt%)alloy with high strength and formability.With the increase of Zn content,forming the coupling distribution of multiscale precipitates and iron-rich phases with a reasonable matching ratio and dispersion distribution characteristics is easy.This phenomenon induces the formation of cell-like structures with alternate distribu-tion of coarse and fine grains,and the average plasticity–strain ratio(characterizing the formability)of the pre-aged alloy with a high strength is up to 0.708.Results reveal the evolution and influence mechanisms of multiscale second-phase particles and the corresponding high formability mechanism of the alloys.The developed coupling control process exhibits considerable potential,revealing remarkable improvements in the room temperature formability of high-strength Al–Zn–Mg–Cu alloys.展开更多
Iron-rich electrolytic manganese residue(IREMR)is an industrial waste produced during the processing of electrolytic metal manganese,and it contains certain amounts of Fe and Mn resources and other heavy metals.In thi...Iron-rich electrolytic manganese residue(IREMR)is an industrial waste produced during the processing of electrolytic metal manganese,and it contains certain amounts of Fe and Mn resources and other heavy metals.In this study,the slurry electrolysis technique was used to recover high-purity Fe powder from IREMR.The effects of IREMR and H2SO4 mass ratio,current density,reaction temper-ature,and electrolytic time on the leaching and current efficiencies of Fe were studied.According to the results,high-purity Fe powder can be recovered from the cathode plate,and the slurry electrolyte can be recycled.The leaching efficiency,current efficiency,and purity of Fe reached 92.58%,80.65%,and 98.72wt%,respectively,at a 1:2.5 mass ratio of H2SO4 and IREMR,reaction temperature of 60℃,electric current density of 30 mA/cm^(2),and reaction time of 8 h.In addition,vibrating sample magnetometer(VSM)analysis showed that the coercivity of electrolytic iron powder was 54.5 A/m,which reached the advanced magnetic grade of electrical pure-iron powder(DT4A coercivity standard).The slurry electrolytic method provides fundamental support for the industrial application of Fe resource recovery in IRMER.展开更多
The impurity iron in silicon material will seriously affect the photoelectric conversion efficiency of silicon solar cells.However,the traditional silicon purification method has the disadvantages of long cycle,high e...The impurity iron in silicon material will seriously affect the photoelectric conversion efficiency of silicon solar cells.However,the traditional silicon purification method has the disadvantages of long cycle,high energy consumption and serious pollution.In this study,an efficient and green pulsed electric current purification technology is proposed.The electromigration effect of iron elements,the current density gradient driving of iron phase,and the gravity of iron phase all affect the migration behavior of iron phase in silicon melt under pulsed electric current.Regardless of the depth of electrode insertion into the silicon melt,the solubility of iron in silicon decreases under the pulsed electric current,which helps to form the iron phase.At the same time,the iron phase tends to sink toward the bottom under the influence of gravity.When the electrode is shallowly inserted,a non-uniform electric field is formed in the silicon melt,and the iron phase is mainly driven by the current density gradient to accelerate sink toward the bottom.When the electrode is fully inserted,an approximately uniform electric field is formed in the silicon melt,and iron elements are preferentially migrated to the cathode by electromigration,forming iron phase sinking at the cathode.The study of impurity iron migration behavior in silicon melt under pulsed electric current provides a new approach for the purification of polycrystalline silicon.展开更多
The characterization of multiple iron-rich phases in high-pressure die-cast AlSi10MnMg alloy was studied.Attention was focused on the formation and fracture behavior of the primary iron-rich phase((P-IMC)_(I))formed i...The characterization of multiple iron-rich phases in high-pressure die-cast AlSi10MnMg alloy was studied.Attention was focused on the formation and fracture behavior of the primary iron-rich phase((P-IMC)_(I))formed in the shot sleeve and plate-shaped eutectic iron-rich phase in high-pressure die cast(HPDC)AlSi10MnMg alloy.Results show that multiple types of iron-rich phases with various morphologies,in-cluding primary iron-rich phases(polyhedral(P-IMC)_(I) and(P-IMC)_(II))and eutectic iron-rich phases(plate-shaped,net shape,and fish-bone shape),were found in HPDC AlSi10MnMg.Coarse(P-IMC)_(I) formed in the shot sleeve were distributed in the interface between primaryα-Al and binary Al-Si eutectic.Small size(P-IMC)_(II) and various eutectic iron-rich phases formed in the die cavity and they were distributed in Al-Si binary eutectic.The primary iron-rich phases belonged to a simple cubic crystal structure with a lattice constant a=1.265 nm and they exhibited a lateral growth characteristic with a termination of{110}surface.βphase was surrounded byδphase and they coexisted in a plate-shaped iron-rich phase.High-density stacking fault inβphase andδ/βinterface provided an excellent nucleation site forδphase.From mechanical behavior,the stress concentration caused by eutectic iron-rich phases was far less than(P-IMC)_(I) and it would not cause crack initiation along the eutectic cluster boundary.In addition,(P-IMC)_(I) showed the worst deformation coordination with primaryα-Al while the plate-shaped eutectic iron-rich phase exhibited similar deformation characteristics with silicon particles.展开更多
At the present time in china, the binder used in tungsten carbide composite button is mainly cobalt, which is very expensive. In order to solve the problems, a new type of rare earth and iron-rich diamond-enhanced tun...At the present time in china, the binder used in tungsten carbide composite button is mainly cobalt, which is very expensive. In order to solve the problems, a new type of rare earth and iron-rich diamond-enhanced tungsten carbide with high abrasive resistance and high toughness against impact, which realizes to substitute ferrum for cobalt, has been developed. The key problems in making the button are to improve the mechanical properties of matrix and increase the welding strength between the diamond and the matrix. All these problems have been solved effectively by low temperature activation hot-press sintering, doping rare earth lanthanum in matrix and high sintering pressure. The properties of the button have been determined under laboratory conditions. The test results show that its hardness is more than 90 HRA, its abrasive resistance is 39 times more than that of conventional cemented tungsten carbide, and its toughness against impact is more than 200 J. All these data show the button has very good mechanical properties.展开更多
The development of an efficient and low-cost electrocatalyst for the oxygen evolution reaction （OER） via an eco-efficient route is a desirable, although challenging, outcome for overall water splitting. Herein, an i...The development of an efficient and low-cost electrocatalyst for the oxygen evolution reaction （OER） via an eco-efficient route is a desirable, although challenging, outcome for overall water splitting. Herein, an iron-rich La0.6Sr0.4Co0.2Fe0.8O2.9 （LSCF28） perovskite with an open porous topographic structure was developed as an electrocatalyst by a straightforward molten-salt synthesis approach. It was found that porosity correlates with both the iron content and the molten-salt approach. Benefiting from the large surface area, high activity of the porous internal surface, and the optimal electronic configuration of redox sites, this inexpensive material exhibits high performance with a large mass activity of 40.8A·g^-1 at a low overpotential of 0.345 V in 0.1 M KOH, surpassing the state-of-the-art precious metal IrO2 catalyst and other well-known perovskites, such as Ba0.5Sr0.5Co0.8Fe0.2O3 and SRCoO2.7. Our work illustrates that the molten- salt method is an effective route to generate porous structures in perovskite oxides, which is important for energy conversion and storage devices.展开更多
The differences in the microstructure and elevated temperature tensile properties of gravity die cast,squeeze cast,and semi-solid thixoformed Al-Si-Cu-Mn-Fe alloys after thermal exposure at 300℃were discussed.The res...The differences in the microstructure and elevated temperature tensile properties of gravity die cast,squeeze cast,and semi-solid thixoformed Al-Si-Cu-Mn-Fe alloys after thermal exposure at 300℃were discussed.The results demonstrate that the elevated temperature tensile properties of semi-solid thixoformed alloys were significantly higher than those of gravity die cast and squeeze cast alloys,especially after thermal exposure for 100 h.The ultimate tensile strength(UTS)of semi-solid thixoformed alloys after thermal exposure at 300℃for 0.5,10 and 100 h were 181,122 and 110 MPa,respectively.The UTS values of semi-solid thixoformed alloys were higher than those of heat resistant aluminum alloys used in commercial applications.The enhanced elevated temperature tensile properties of semi-solid thixoformed experimental alloys after thermal exposure can be attributed to the combined reinforcement of precipitation strengthening and grain boundary strengthening due to thermally stable intermetallic phases as well as suitable grain size.展开更多
In order to make the slag from desulphurization and slag skimming(SDSS)to be comprehensively recycled and utilized,a combined process of beneficiation and building materials preparation was proposed to recover iron fr...In order to make the slag from desulphurization and slag skimming(SDSS)to be comprehensively recycled and utilized,a combined process of beneficiation and building materials preparation was proposed to recover iron from SDSS,meanwhile to apply the remaining slag tailings as cement admixture.From this process,three iron-rich products were recovered in stages by clean gravity-magnetic separation,slag tailings were left.Slag powder was prepared by ultrafine grinding of slag tailings.The stability,setting time and cement mortar strength of the slag tailings cements(STC)which were mixed with Portland cement and slag powder were studied respectively.The results showed that a proper overall performance still could be obtained at the slag powder content of 30%.Chemical composition analysis,X-ray diffraction(XRD)analysis,metallographic microscope and scanning electron microscope(SEM)analysis were employed to assess the characteristics of the SDSS and the products obtained from the whole process.The results indicated that the three iron-rich products could be used as a raw material for steelmaking and ironmaking and the relatively large amount of calcium silicate(C_(2)S)and tricalcium silicate(C_(3)S)in the slag tailings make the addition of slag powder into the Portland cement feasible.展开更多
The effect of Si content on the microstructures and mechanical properties of the heat-treated Al-6.5 Cu-0.6 Mn-0.5 Fe alloy was investigated using image analysis,scanning electron microscopy(SEM),transmission electron...The effect of Si content on the microstructures and mechanical properties of the heat-treated Al-6.5 Cu-0.6 Mn-0.5 Fe alloy was investigated using image analysis,scanning electron microscopy(SEM),transmission electron microscopy(TEM),and tensile testing.The results show that the mechanical properties of Al-6.5 Cu-0.6 Mn-0.5 Fe alloys decrease slightly when the Si content is below 1.0%.This can be attributed to the comprehensive effect of microstructure evolution,including the increase of nano-sized α-Fe,the coarsened grain size,and an increase in Al2 Cu content at the grain boundary.When the Si content is 1.5%,the mechanical properties of the Al-6.5 Cu-0.6 Mn-0.5 Fe alloys decrease significantly,and this can be attributed to the agglomerated second intermetallics,which is resulted from the formation of excess Si particles.展开更多
Electromagnetic separation of the iron-rich phase inclusions from Al alloy was investigated. The influencing parameters including magnetic induction density, the section shape of the separating channel and the length ...Electromagnetic separation of the iron-rich phase inclusions from Al alloy was investigated. The influencing parameters including magnetic induction density, the section shape of the separating channel and the length of influential loop of the metal melt on the separation efficiency of iron-rich phase inclusions were studied. The results show that when the proper magnetic induction density (B=0.3T) is applied, rectangle separating channel is used, and the influential loop of the metal melt is long, high separating efficiency of the iron-rich phase inclusions can be obtained.展开更多
A new method has been proposed to prepare Mg-A1-Si master alloys by utilizing scrap AI-Si-Fe alloys with higher Fe levels, which aims to segregate Fe from AI-Si-Fe alloys by Mg melt. The segregation be- haviors, micro...A new method has been proposed to prepare Mg-A1-Si master alloys by utilizing scrap AI-Si-Fe alloys with higher Fe levels, which aims to segregate Fe from AI-Si-Fe alloys by Mg melt. The segregation be- haviors, microstructure morphology and evolution mechanism of iron-rich phases in Mg-A1-Si alloy melts were studied, after AI-14Si-4Fe （wt%） alloys were added and dissolved completely. In the Mg-A1-Si alloys, iron has very little solubility and tends to combine with other elements to form intermetallic phases, which grow into a deposition layer due to the higher density. During the cooling and solidifying process of Mg-A1-Si melts, the needle-like AlsSiFe phase in AI-14Si-4Fe alloy evolved into blocky AI5Fe2 and Al0.7Fe3Si0.3 phases. Besides, the Fe levels of the Mg-AI-Si master alloys were reduced to 0.017 wt% from nominal content of 0.164 wt%. Based on the above results, this work carried out a semi-quantitative phase- compositions analysis for the deposition layer by relative intensity ratio （RIR） method, and evolution mechanism of the iron-rich phases had also been discussed. This study has paved a new way to regen- erate the scrap AI-Si-Fe alloys, which has a great significance of promoting the recycling of aluminum resources.展开更多
Iron-rich groundwater flowing into wetlands is a worldwide environmental pollution phenomenon that is closely associated with the stability of wetland ecosystems. Combined with high phosphorus(P) loading from agricult...Iron-rich groundwater flowing into wetlands is a worldwide environmental pollution phenomenon that is closely associated with the stability of wetland ecosystems. Combined with high phosphorus(P) loading from agricultural runoff, the prediction of the evolution of wetland vegetation affected by compound contamination is particularly urgent. We tested the effects of anaerobic iron-rich groundwater discharge in a freshwater marsh by simulating the effect of three levels of eutrophic water on native plants(Glyceria spiculosa(Fr. Schmidt.) Rosh.). The management of wetland vegetation with 1–20 mg/L Fe input is an efficient method to promote the growth of plants, which showed an optimum response under a 0.10 mg/L P surface water environment. Iron-rich groundwater strongly affects the changes in ecological niches of some wetland plant species and the dominant species. In addition, when the P concentration in a natural body of water is too high, the governance effect of eutrophication might not be as expected. Under iron-rich groundwater conditions, the δ^(13)C values of organs were more depleted, which can partially explain the differences in δ^(13)C in the soil profile. Conversely, the carbon isotope composition of soil organic carbon is indicative of past changes in vegetation. The results of our experiments confirm that iron-rich groundwater discharge has the potential to affect vegetation composition through toxicity modification in eutrophic environments.展开更多
基金financially supported by the Geological Survey Program of China(grants No.K1410 and DD20160346)the National Natural Foundation of China(grants No.41672078 and 41402067)
文摘Long-standing controversy persists over the presence and role of iron-rich melts in the formation of volcanic rock-hosted iron deposits. Conjugate iron-rich and silica-rich melt inclusions observed in thin-sections are considered as direct evidence for the presence of iron-rich melt, yet unequivocal outcrop-scale evidence of iron-rich melts are still lacking in volcanic rock-hosted iron deposits. Submarine volcanic rock-hosted iron deposits, which are mainly distributed in the western and eastern Tianshan Mountains in Xinjiang, are important resources of iron ores in China, but it remains unclear whether iron-rich melts have played a role in the mineralization of such iron ores. In this study, we observed abundant iron-rich agglomerates in the brecciated andesite lava of the Heijianshan submarine volcanic rock-hosted iron deposit, Eastern Tianshan, China. The iron-rich agglomerates occur as irregular and angular masses filling fractures of the host brecciated andesite lava. They show concentric potassic alteration with silicification or epidotization rims, indicative of their formation after the wall rocks. The iron-rich agglomerates have porphyritic and hyalopilitic textures, and locally display chilled margins in the contact zone with the host rocks. These features cannot be explained by hydrothermal replacement of wall rocks （brecciated andesite lava） which is free of vesicle and amygdale, rather they indicate direct crystallization of the iron-rich agglomerates from iron-rich melts. We propose that the iron-rich agglomerates were formed by open-space filling of volatile-rich iron-rich melt in fractures of the brecciated andesite lava. The iron-rich agglomerates are compositionally similar to the wall-rock brecciated andesite lava, but have much larger variation. Based on mineral assemblages, the iron-rich agglomerates are subdivided into five types, i.e., albite-magnetite type, albite-K-feldspar- magnetite type, K-feldspar-magnetite type, epidote-magnetite type and quartz-magnetite type, representing that
基金Project(2017GDASCX-0117)supported by the Guangdong Academy of Sciences,ChinaProject(201806010126)supported by the Pearl River S&T Nova Program of Guangzhou,China+3 种基金Projects(2017A050503004,2017A07071029)supported by the Guangdong Provincial Program of Science and Technology,ChinaProject(18126010)supported by the Guangxi Autonomous Regional Program of Science and Technology,ChinaProject(201802030012)supported by the Guangzhou Municipal Science and Technology Bureau,ChinaProject(2017A0109005)supported by the Sihui Plan Project of Science and Technology,China.
文摘The effect of the melt holding temperature on the morphological evolution and sedimentation behavior of iron-rich intermetallics in Al-7.0 Si-1.0 Fe-1.2 Mn-0.25 Mg alloy was investigated using an optical microscope,scanning electron microscope and differential thermal analyzer.The results show that as the holding temperature decreases,the morphologies of the primary iron-rich phase in matrix change from star-like to polygonal,and the number of the primary phases gradually decreases and disappears at 615°C.Finally,the Chinese script phases with small size,high compact and uniform distribution are obtained.In contrast,the primary iron-rich phases in slag transform into a coarser polygonal shape with lower roundness,and some of them have hollow structures.Furthermore,the area fraction of intermetallics and Fe content in the matrix decrease gradually due to the formation and growth of sludge and subsequent natural sedimentation during melt holding.With the decrease of holding temperature,the main factors hindering the settlement of the primary phases are morphology,size,and density in turn.
文摘A study has been carried out on the feasibility of using high iron content wastes, generated during steel making, as a raw material for the production of glass ceramic. The iron-rich wastes were mixed and melted in different proportions with soda-lime glass cullet and sand. The devitrification of the parent glasses produced from the different mixtures was investigated using differential thermal analysis, X-ray diffraction, and scanning electron microscopy. The mechanical properties of the glass-ceramic were assessed by hardness and indentation fracture toughness measurement. A glass ceramic with mixture of 60 wt pct iron-rich wastes, 25 wt pct sand, and 15 wt pct glass cullet exhibited the best combination of properties, namely, hardness 7.9 CPa and fracture toughness 3.75 MPa·m^1/2, for the sake of containing magnetite in marked dendritic morphology. These new hard glass ceramics are candidate materials for wear resistant tiles and paving for heavy industrial floors.
基金financially supported by the National Key R&D Program of China(No.2018YFB2003901)NSFC-BRICS(No.51761145026)NSFC(Nos.91960101 and 51520105002)。
文摘Increasing iron content has been witnessed an essential method to improve the remanence of 2:17-type Sm-Co-Fe-Cu-Zr magnets,however,the inferior squareness factor accompanied with the increased iron content turns into a neck sticking problem.In this work,the grain boundary optimization induced substantial squareness enhancement from 63.4%to 91.4%,and consequently an excellent maximum energy product of 32.63 MGOe have been achieved in iron-rich Sm-Co-Fe-Cu-Zr magnets via tuning solution process.It is clearly revealed that the grain boundary(GB)phases as well as the micro-twins’density in grain interiors can be controlled and interprets the enhancement mechanism of squareness.
基金supported by the National Key Research and Development Program of China(No.2021YFE0115900)the National Natural Science Foundation of China(Nos.52371016,51871029,and 51571023)the Opening Project of State Key Laboratory for Advanced Metals and Materials(Nos.2020-ZD02 and No.2022-Z03).
文摘This study investigated the influence of graded Zn content on the evolution of precipitated and iron-rich phases and grain struc-ture of the alloys,designed and developed the Al–8.0Zn–1.5Mg–1.5Cu–0.2Fe(wt%)alloy with high strength and formability.With the increase of Zn content,forming the coupling distribution of multiscale precipitates and iron-rich phases with a reasonable matching ratio and dispersion distribution characteristics is easy.This phenomenon induces the formation of cell-like structures with alternate distribu-tion of coarse and fine grains,and the average plasticity–strain ratio(characterizing the formability)of the pre-aged alloy with a high strength is up to 0.708.Results reveal the evolution and influence mechanisms of multiscale second-phase particles and the corresponding high formability mechanism of the alloys.The developed coupling control process exhibits considerable potential,revealing remarkable improvements in the room temperature formability of high-strength Al–Zn–Mg–Cu alloys.
基金supported by the Key Research and Development Program of Guangxi Province,China (No.AB23075174)the National Natural Science Foundation of China (No.52174386)the Science and Technology Plan Project of Sichuan Province,China (No.2022YFS0459).
文摘Iron-rich electrolytic manganese residue(IREMR)is an industrial waste produced during the processing of electrolytic metal manganese,and it contains certain amounts of Fe and Mn resources and other heavy metals.In this study,the slurry electrolysis technique was used to recover high-purity Fe powder from IREMR.The effects of IREMR and H2SO4 mass ratio,current density,reaction temper-ature,and electrolytic time on the leaching and current efficiencies of Fe were studied.According to the results,high-purity Fe powder can be recovered from the cathode plate,and the slurry electrolyte can be recycled.The leaching efficiency,current efficiency,and purity of Fe reached 92.58%,80.65%,and 98.72wt%,respectively,at a 1:2.5 mass ratio of H2SO4 and IREMR,reaction temperature of 60℃,electric current density of 30 mA/cm^(2),and reaction time of 8 h.In addition,vibrating sample magnetometer(VSM)analysis showed that the coercivity of electrolytic iron powder was 54.5 A/m,which reached the advanced magnetic grade of electrical pure-iron powder(DT4A coercivity standard).The slurry electrolytic method provides fundamental support for the industrial application of Fe resource recovery in IRMER.
基金financially supported by the National Natural Science Foundation of China(No.U21B2082)Natural Science Foundation of Beijing Municipality(No.2222065)and Fundamental Research Funds for the Central Universities(No.FRF-TP-22-02C2).
文摘The impurity iron in silicon material will seriously affect the photoelectric conversion efficiency of silicon solar cells.However,the traditional silicon purification method has the disadvantages of long cycle,high energy consumption and serious pollution.In this study,an efficient and green pulsed electric current purification technology is proposed.The electromigration effect of iron elements,the current density gradient driving of iron phase,and the gravity of iron phase all affect the migration behavior of iron phase in silicon melt under pulsed electric current.Regardless of the depth of electrode insertion into the silicon melt,the solubility of iron in silicon decreases under the pulsed electric current,which helps to form the iron phase.At the same time,the iron phase tends to sink toward the bottom under the influence of gravity.When the electrode is shallowly inserted,a non-uniform electric field is formed in the silicon melt,and the iron phase is mainly driven by the current density gradient to accelerate sink toward the bottom.When the electrode is fully inserted,an approximately uniform electric field is formed in the silicon melt,and iron elements are preferentially migrated to the cathode by electromigration,forming iron phase sinking at the cathode.The study of impurity iron migration behavior in silicon melt under pulsed electric current provides a new approach for the purification of polycrystalline silicon.
基金supported by the Major Science and Technology Project of Changchun City,Jilin Province(No.20210301024GX)the National Natural Science Foundation of China(No.52175335)The authors also appreciate the help pro-vided by China FAW Foundry Co.,LTD and Germany ALUMINUM RHEINFELDEN Group.
文摘The characterization of multiple iron-rich phases in high-pressure die-cast AlSi10MnMg alloy was studied.Attention was focused on the formation and fracture behavior of the primary iron-rich phase((P-IMC)_(I))formed in the shot sleeve and plate-shaped eutectic iron-rich phase in high-pressure die cast(HPDC)AlSi10MnMg alloy.Results show that multiple types of iron-rich phases with various morphologies,in-cluding primary iron-rich phases(polyhedral(P-IMC)_(I) and(P-IMC)_(II))and eutectic iron-rich phases(plate-shaped,net shape,and fish-bone shape),were found in HPDC AlSi10MnMg.Coarse(P-IMC)_(I) formed in the shot sleeve were distributed in the interface between primaryα-Al and binary Al-Si eutectic.Small size(P-IMC)_(II) and various eutectic iron-rich phases formed in the die cavity and they were distributed in Al-Si binary eutectic.The primary iron-rich phases belonged to a simple cubic crystal structure with a lattice constant a=1.265 nm and they exhibited a lateral growth characteristic with a termination of{110}surface.βphase was surrounded byδphase and they coexisted in a plate-shaped iron-rich phase.High-density stacking fault inβphase andδ/βinterface provided an excellent nucleation site forδphase.From mechanical behavior,the stress concentration caused by eutectic iron-rich phases was far less than(P-IMC)_(I) and it would not cause crack initiation along the eutectic cluster boundary.In addition,(P-IMC)_(I) showed the worst deformation coordination with primaryα-Al while the plate-shaped eutectic iron-rich phase exhibited similar deformation characteristics with silicon particles.
文摘At the present time in china, the binder used in tungsten carbide composite button is mainly cobalt, which is very expensive. In order to solve the problems, a new type of rare earth and iron-rich diamond-enhanced tungsten carbide with high abrasive resistance and high toughness against impact, which realizes to substitute ferrum for cobalt, has been developed. The key problems in making the button are to improve the mechanical properties of matrix and increase the welding strength between the diamond and the matrix. All these problems have been solved effectively by low temperature activation hot-press sintering, doping rare earth lanthanum in matrix and high sintering pressure. The properties of the button have been determined under laboratory conditions. The test results show that its hardness is more than 90 HRA, its abrasive resistance is 39 times more than that of conventional cemented tungsten carbide, and its toughness against impact is more than 200 J. All these data show the button has very good mechanical properties.
文摘The development of an efficient and low-cost electrocatalyst for the oxygen evolution reaction （OER） via an eco-efficient route is a desirable, although challenging, outcome for overall water splitting. Herein, an iron-rich La0.6Sr0.4Co0.2Fe0.8O2.9 （LSCF28） perovskite with an open porous topographic structure was developed as an electrocatalyst by a straightforward molten-salt synthesis approach. It was found that porosity correlates with both the iron content and the molten-salt approach. Benefiting from the large surface area, high activity of the porous internal surface, and the optimal electronic configuration of redox sites, this inexpensive material exhibits high performance with a large mass activity of 40.8A·g^-1 at a low overpotential of 0.345 V in 0.1 M KOH, surpassing the state-of-the-art precious metal IrO2 catalyst and other well-known perovskites, such as Ba0.5Sr0.5Co0.8Fe0.2O3 and SRCoO2.7. Our work illustrates that the molten- salt method is an effective route to generate porous structures in perovskite oxides, which is important for energy conversion and storage devices.
基金financially supported by the National Natural Science Foundation of China(Nos.51704084,52074131)the Science and Technology Plan of Guizhou Province,China(Nos.ZK2021(267),ZK2021(067))the Cultivation Project of Guizhou University,China(No.2019(23))。
文摘The differences in the microstructure and elevated temperature tensile properties of gravity die cast,squeeze cast,and semi-solid thixoformed Al-Si-Cu-Mn-Fe alloys after thermal exposure at 300℃were discussed.The results demonstrate that the elevated temperature tensile properties of semi-solid thixoformed alloys were significantly higher than those of gravity die cast and squeeze cast alloys,especially after thermal exposure for 100 h.The ultimate tensile strength(UTS)of semi-solid thixoformed alloys after thermal exposure at 300℃for 0.5,10 and 100 h were 181,122 and 110 MPa,respectively.The UTS values of semi-solid thixoformed alloys were higher than those of heat resistant aluminum alloys used in commercial applications.The enhanced elevated temperature tensile properties of semi-solid thixoformed experimental alloys after thermal exposure can be attributed to the combined reinforcement of precipitation strengthening and grain boundary strengthening due to thermally stable intermetallic phases as well as suitable grain size.
基金The authors gratefully acknowledge the National Key Research and Development Program of China(No.2018YFC1901902)the Liao Ning Revitalization Talents Program(No.XLYC1907162).
文摘In order to make the slag from desulphurization and slag skimming(SDSS)to be comprehensively recycled and utilized,a combined process of beneficiation and building materials preparation was proposed to recover iron from SDSS,meanwhile to apply the remaining slag tailings as cement admixture.From this process,three iron-rich products were recovered in stages by clean gravity-magnetic separation,slag tailings were left.Slag powder was prepared by ultrafine grinding of slag tailings.The stability,setting time and cement mortar strength of the slag tailings cements(STC)which were mixed with Portland cement and slag powder were studied respectively.The results showed that a proper overall performance still could be obtained at the slag powder content of 30%.Chemical composition analysis,X-ray diffraction(XRD)analysis,metallographic microscope and scanning electron microscope(SEM)analysis were employed to assess the characteristics of the SDSS and the products obtained from the whole process.The results indicated that the three iron-rich products could be used as a raw material for steelmaking and ironmaking and the relatively large amount of calcium silicate(C_(2)S)and tricalcium silicate(C_(3)S)in the slag tailings make the addition of slag powder into the Portland cement feasible.
基金Projects(51704084,51605106) supported by the National Natural Science Foundation of ChinaProject(2017M623068) supported by China Postdoctoral Science Foundation+3 种基金Project(2015A030312003) supported by the Natural Science Foundation for Team Research of Guangdong Province,ChinaProject(JC(2016)1026)) supported by the Science and Technology Foundation of Guizhou Province of ChinaProject(KY(2017)101)) supported by the Young Talent Growth Foundation of Education Department of Guizhou Province of ChinaProject(RC2017(5788)) supported by the Science and Technology Plan of Guizhou Province of China
文摘The effect of Si content on the microstructures and mechanical properties of the heat-treated Al-6.5 Cu-0.6 Mn-0.5 Fe alloy was investigated using image analysis,scanning electron microscopy(SEM),transmission electron microscopy(TEM),and tensile testing.The results show that the mechanical properties of Al-6.5 Cu-0.6 Mn-0.5 Fe alloys decrease slightly when the Si content is below 1.0%.This can be attributed to the comprehensive effect of microstructure evolution,including the increase of nano-sized α-Fe,the coarsened grain size,and an increase in Al2 Cu content at the grain boundary.When the Si content is 1.5%,the mechanical properties of the Al-6.5 Cu-0.6 Mn-0.5 Fe alloys decrease significantly,and this can be attributed to the agglomerated second intermetallics,which is resulted from the formation of excess Si particles.
基金Foundation item: project (59774017) supported by NationalNatureScience Found, China project (G199906490-4) supported by Na-tionalKey FundamentalResearch and Developing Program, China
文摘Electromagnetic separation of the iron-rich phase inclusions from Al alloy was investigated. The influencing parameters including magnetic induction density, the section shape of the separating channel and the length of influential loop of the metal melt on the separation efficiency of iron-rich phase inclusions were studied. The results show that when the proper magnetic induction density (B=0.3T) is applied, rectangle separating channel is used, and the influential loop of the metal melt is long, high separating efficiency of the iron-rich phase inclusions can be obtained.
基金supported by the National Natural Science Foundation of China(No.512711101)the National Basic Research Program of China (No.2012CB825702)
文摘A new method has been proposed to prepare Mg-A1-Si master alloys by utilizing scrap AI-Si-Fe alloys with higher Fe levels, which aims to segregate Fe from AI-Si-Fe alloys by Mg melt. The segregation be- haviors, microstructure morphology and evolution mechanism of iron-rich phases in Mg-A1-Si alloy melts were studied, after AI-14Si-4Fe （wt%） alloys were added and dissolved completely. In the Mg-A1-Si alloys, iron has very little solubility and tends to combine with other elements to form intermetallic phases, which grow into a deposition layer due to the higher density. During the cooling and solidifying process of Mg-A1-Si melts, the needle-like AlsSiFe phase in AI-14Si-4Fe alloy evolved into blocky AI5Fe2 and Al0.7Fe3Si0.3 phases. Besides, the Fe levels of the Mg-AI-Si master alloys were reduced to 0.017 wt% from nominal content of 0.164 wt%. Based on the above results, this work carried out a semi-quantitative phase- compositions analysis for the deposition layer by relative intensity ratio （RIR） method, and evolution mechanism of the iron-rich phases had also been discussed. This study has paved a new way to regen- erate the scrap AI-Si-Fe alloys, which has a great significance of promoting the recycling of aluminum resources.
基金Under the auspices of National Key Research and Development Program of China(No.2016YFA0602303,2016YFC0500408)National Key Research and Development Program of China(2016YFC0500408)+2 种基金National Natural Science Foundation of China(No.41771120,41271107,41471079)Northeast Institute of Geography and Agroecology,Chinese Academy of Sciences(No.IGA-135-05)the CPSF-CAS Joint Foundation for Excellent Postdoctoral Fellows(No.20150010)
文摘Iron-rich groundwater flowing into wetlands is a worldwide environmental pollution phenomenon that is closely associated with the stability of wetland ecosystems. Combined with high phosphorus(P) loading from agricultural runoff, the prediction of the evolution of wetland vegetation affected by compound contamination is particularly urgent. We tested the effects of anaerobic iron-rich groundwater discharge in a freshwater marsh by simulating the effect of three levels of eutrophic water on native plants(Glyceria spiculosa(Fr. Schmidt.) Rosh.). The management of wetland vegetation with 1–20 mg/L Fe input is an efficient method to promote the growth of plants, which showed an optimum response under a 0.10 mg/L P surface water environment. Iron-rich groundwater strongly affects the changes in ecological niches of some wetland plant species and the dominant species. In addition, when the P concentration in a natural body of water is too high, the governance effect of eutrophication might not be as expected. Under iron-rich groundwater conditions, the δ^(13)C values of organs were more depleted, which can partially explain the differences in δ^(13)C in the soil profile. Conversely, the carbon isotope composition of soil organic carbon is indicative of past changes in vegetation. The results of our experiments confirm that iron-rich groundwater discharge has the potential to affect vegetation composition through toxicity modification in eutrophic environments.
