采用水平层状均匀介质中点电源位于任意深度时的电位解析表达式,以江宁台3层电性结构为例,分析了井下对称四极地电阻率观测时各层影响系数随深度、极距的变化,并结合探测深度探讨了实施井下观测时影响系数在选择供电极距和电极埋深时的...采用水平层状均匀介质中点电源位于任意深度时的电位解析表达式,以江宁台3层电性结构为例,分析了井下对称四极地电阻率观测时各层影响系数随深度、极距的变化,并结合探测深度探讨了实施井下观测时影响系数在选择供电极距和电极埋深时的作用。结果表明,对于“K”型电性结构,江宁台井下观测对地表、浅层干扰有较强的抑制作用,其短极距观测对地表、浅层干扰的抑制能力显著优于长极距观测;长极距观测在电极埋深 H 小于100m时对地表介质季节性的干扰具有放大作用;浅层影响系数一定时,电极埋深和供电极距需同时增加;江宁台井下观测供电极距AB/2取100~150m、电极埋深 H 为250m较为合理。展开更多
In this study, several kinds of flexible protective materials sprayed with polyurea elastomers （hereinafter referred to as polyurea elastomer protective material） were adopted to meet the abrasion resistance require...In this study, several kinds of flexible protective materials sprayed with polyurea elastomers （hereinafter referred to as polyurea elastomer protective material） were adopted to meet the abrasion resistance requirement of hydraulic structures, and their abrasion resistances against the water flow with suspended load or bed load were studied systematically through tests. Natural basalt stones were adopted as the abrasive for simulation of the abrasion effect of the water flow with bed load, and test results indicate that the basalt stone is suitable for use in the abrasion resistance test of the flexible protective material. The wear process of the polyurea elastomer protective material is stable, and the wear loss is linear with the time of abrasion. If the wear thickness is regarded as the abrasion resistance evaluation factor, the abrasion resistance of the 351 pure polyurea is about twice those of pure polyurea with a high level of hardness and aliphatic polyurea, and over five times that of high-performance abrasion-resistant concrete under the abrasion of the water flow with suspended load. It is also about 50 times that of high-performance abrasion-resistant concrete under the abrasion of the water flow with bed load. Overall, the abrasion resistance of pure polyurea presented a decreasing trend with increasing hardness. Pure polyurea with a Shore hardness of D30 has the best abrasion resistance, which is 60 to 70 times that of high-performance abrasion-resistant concrete under the abrasion of the water flow with bed load, and has been recommended, among the five kinds of pure polyurea materials with different hardness, in anti-abrasion protection of hydraulic structures.展开更多
文摘采用水平层状均匀介质中点电源位于任意深度时的电位解析表达式,以江宁台3层电性结构为例,分析了井下对称四极地电阻率观测时各层影响系数随深度、极距的变化,并结合探测深度探讨了实施井下观测时影响系数在选择供电极距和电极埋深时的作用。结果表明,对于“K”型电性结构,江宁台井下观测对地表、浅层干扰有较强的抑制作用,其短极距观测对地表、浅层干扰的抑制能力显著优于长极距观测;长极距观测在电极埋深 H 小于100m时对地表介质季节性的干扰具有放大作用;浅层影响系数一定时,电极埋深和供电极距需同时增加;江宁台井下观测供电极距AB/2取100~150m、电极埋深 H 为250m较为合理。
基金supported by the National Natural Science Foundation of China(Grants No.51109143 and 51209144)the Natural Science Foundation of Jiangsu Province(Grant No.BK2011109)the Foundation of Nanjing Hydraulic Research Institute(Grant No.Y113004)
文摘In this study, several kinds of flexible protective materials sprayed with polyurea elastomers （hereinafter referred to as polyurea elastomer protective material） were adopted to meet the abrasion resistance requirement of hydraulic structures, and their abrasion resistances against the water flow with suspended load or bed load were studied systematically through tests. Natural basalt stones were adopted as the abrasive for simulation of the abrasion effect of the water flow with bed load, and test results indicate that the basalt stone is suitable for use in the abrasion resistance test of the flexible protective material. The wear process of the polyurea elastomer protective material is stable, and the wear loss is linear with the time of abrasion. If the wear thickness is regarded as the abrasion resistance evaluation factor, the abrasion resistance of the 351 pure polyurea is about twice those of pure polyurea with a high level of hardness and aliphatic polyurea, and over five times that of high-performance abrasion-resistant concrete under the abrasion of the water flow with suspended load. It is also about 50 times that of high-performance abrasion-resistant concrete under the abrasion of the water flow with bed load. Overall, the abrasion resistance of pure polyurea presented a decreasing trend with increasing hardness. Pure polyurea with a Shore hardness of D30 has the best abrasion resistance, which is 60 to 70 times that of high-performance abrasion-resistant concrete under the abrasion of the water flow with bed load, and has been recommended, among the five kinds of pure polyurea materials with different hardness, in anti-abrasion protection of hydraulic structures.
