A detailed assessment of an incinerator based on fuel consumption and cycle time data is presented in this paper. The study was conducted at Temeke district hospital for 22 months consecutively covering 654 days of da...A detailed assessment of an incinerator based on fuel consumption and cycle time data is presented in this paper. The study was conducted at Temeke district hospital for 22 months consecutively covering 654 days of daily data collection on fuel consumption and cycle times. The composition for the medical waste incinerated varied between 15% and 35% for sharps waste and between 65% and 85% for other waste, with mean values of 25% and 75%, respectively. The results revealed poor performance of the incinerator due to higher fuel consumption (above 30 L/cycle). The incineration cycle times were observed to range between 2 and 4 hours, all of which were too high for the loading rates observed (55 - 214 kg). A strong dependency of diesel oil consumption on cycle time was observed due to lack of temperature control leading to continuous fuel flow into the burners. The incineration capacity was very low compared to other incinerators in terms of tons per year. This paper gives an insight on the factors affecting incinerator performance assessed based on diesel oil consumption and cycle times. It can be generalized that the incinerator performance was poor due to several factors ranging from poor incinerator design, operator skills, waste management practices, waste storage practices, etc. The hospital was advised to install a new incinerator with short incineration cycle time (30 - 40 minutes) and lower fuel consumption (10 L/cycle) at a loading rate of 200 kg/cycle.展开更多
The objective of this study was to assess the performance of an old existing medical waste incinerator in a district (Temeke) hospital. The medical waste incinerated was grouped into two categories: sharps waste and o...The objective of this study was to assess the performance of an old existing medical waste incinerator in a district (Temeke) hospital. The medical waste incinerated was grouped into two categories: sharps waste and other waste. The parameters assessed included amounts of sharps and other waste incinerated, amount of fuel used and the incineration cycle time. One incineration cycle was conducted per day and data was collected for 22 months (N = 653). It was established that the total waste incinerated per day ranged from 70 to 120 kg, completing the process between 2 and 4 hrs and consuming 20 to 40 L of fuel per day. The analysis showed further that sharps waste incinerated were 25% of the total waste while other waste incinerated were about 75% on average. The average diesel oil used was 30 L/day and average cycle time was observed to be 3 hrs, both being excessively high indicating that the performance of the incin-erator was poor. The statistical analysis was used to reveal stronger variations in other waste than sharps waste. The PDF plots, skewness and kurtosis values indicated that there were weak variations in the daily diesel oil consumed and incineration cycle time while stronger variations were observed in the other waste compared to sharps waste data. Normalization of the incinerator performance data allowed comparison between different data types also indicating poor performance of the incinerator. Proper segregation at point of generation and proper storage of medical waste was recommended. It was further recommended for the hospital to install a new and efficient incinerator with short incineration cycle time and less fuel consumption.展开更多
文摘A detailed assessment of an incinerator based on fuel consumption and cycle time data is presented in this paper. The study was conducted at Temeke district hospital for 22 months consecutively covering 654 days of daily data collection on fuel consumption and cycle times. The composition for the medical waste incinerated varied between 15% and 35% for sharps waste and between 65% and 85% for other waste, with mean values of 25% and 75%, respectively. The results revealed poor performance of the incinerator due to higher fuel consumption (above 30 L/cycle). The incineration cycle times were observed to range between 2 and 4 hours, all of which were too high for the loading rates observed (55 - 214 kg). A strong dependency of diesel oil consumption on cycle time was observed due to lack of temperature control leading to continuous fuel flow into the burners. The incineration capacity was very low compared to other incinerators in terms of tons per year. This paper gives an insight on the factors affecting incinerator performance assessed based on diesel oil consumption and cycle times. It can be generalized that the incinerator performance was poor due to several factors ranging from poor incinerator design, operator skills, waste management practices, waste storage practices, etc. The hospital was advised to install a new incinerator with short incineration cycle time (30 - 40 minutes) and lower fuel consumption (10 L/cycle) at a loading rate of 200 kg/cycle.
文摘The objective of this study was to assess the performance of an old existing medical waste incinerator in a district (Temeke) hospital. The medical waste incinerated was grouped into two categories: sharps waste and other waste. The parameters assessed included amounts of sharps and other waste incinerated, amount of fuel used and the incineration cycle time. One incineration cycle was conducted per day and data was collected for 22 months (N = 653). It was established that the total waste incinerated per day ranged from 70 to 120 kg, completing the process between 2 and 4 hrs and consuming 20 to 40 L of fuel per day. The analysis showed further that sharps waste incinerated were 25% of the total waste while other waste incinerated were about 75% on average. The average diesel oil used was 30 L/day and average cycle time was observed to be 3 hrs, both being excessively high indicating that the performance of the incin-erator was poor. The statistical analysis was used to reveal stronger variations in other waste than sharps waste. The PDF plots, skewness and kurtosis values indicated that there were weak variations in the daily diesel oil consumed and incineration cycle time while stronger variations were observed in the other waste compared to sharps waste data. Normalization of the incinerator performance data allowed comparison between different data types also indicating poor performance of the incinerator. Proper segregation at point of generation and proper storage of medical waste was recommended. It was further recommended for the hospital to install a new and efficient incinerator with short incineration cycle time and less fuel consumption.
