A development of an acquisition of the characteristic of a solar panel by automatic load variation system is put into play and coupled to an instrumentation chain for taking account of temperature. A programmed digita...A development of an acquisition of the characteristic of a solar panel by automatic load variation system is put into play and coupled to an instrumentation chain for taking account of temperature. A programmed digital microprocessor control enables this automation. Design and implementation of a device for automation of variations of the resistive load are powered by solar panel. It is provided by a PIC 16F877A running a computer program that we have developed on the basis of an algorithm according to the operation that we have set. By varying automatically the resistive load, we were able to automatically acquire the characteristic I-V and temperature of the solar panel. With automatic combinations of the 10 resistors, we have obtained 1024 measures of the characteristic curve of the solar cell which has a good accuracy. The change in load and temperature measurement allows us to have the characteristic curves parameterized by temperature.展开更多
As the fourth passive circuit component, a memristor is a nonlinear resistor that can ＂remember＂ the amount of charge passing through it. The characteristic of ＂remembering＂ the charge and non-volatility makes mem...As the fourth passive circuit component, a memristor is a nonlinear resistor that can ＂remember＂ the amount of charge passing through it. The characteristic of ＂remembering＂ the charge and non-volatility makes memristors great potential candidates in many fields. Nowadays, only a few groups have the ability to fabricate memristors, and most researchers study them by theoretic analysis and simulation. In this paper, we first analyse the theoretical base and characteristics of memristors, then use a simulation program with integrated circuit emphasis as our tool to simulate the theoretical model of memristors and change the parameters in the model to see the influence of each parameter on the characteristics. Our work supplies researchers engaged in memristor-based circuits with advice on how to choose the proper parameters.展开更多
BaTiO3 thin film has been deposited on Si(100) substrate using sol-gel process and deposited by using spin – coating technique. The BaTiO3/Si(100) structures were studied by structural and electrical characteristics....BaTiO3 thin film has been deposited on Si(100) substrate using sol-gel process and deposited by using spin – coating technique. The BaTiO3/Si(100) structures were studied by structural and electrical characteristics. The X-ray diffrac-tion of BaTiO3/Si(100) shows that the diffraction peaks become increasing sharp with increasing calcination tempera-tures indicating the enhance crystallinity of the films. Scanning electron microscopy of BaTiO3 thin films shows the crack free and uniform nature. The capacitance-voltage measurement of BaTiO3 thin film deposited on Si(100) an-nealed at 600℃ shows large frequency dispersion in the accumulation region. The current-voltage measurement of BaTiO3/Si shows the ideality factor was approaches to unity at 600℃.展开更多
This study reports the dosimetric response of a(ZnO)_(0.2)(TeO_(2))_(0.8)thin film sensor irradiated with high-energy X-ray radiation at various doses.The spray pyrolysis method was used for the film deposition on sod...This study reports the dosimetric response of a(ZnO)_(0.2)(TeO_(2))_(0.8)thin film sensor irradiated with high-energy X-ray radiation at various doses.The spray pyrolysis method was used for the film deposition on soda-lime glass substrate using zinc acetate dehydrate and tellurium dioxide powder as the starting precursors.The structural and morphological properties of the film were determined.The I-V characteristics measurements were performed during irradiation with a 6 MV X-ray beam from a Linac.The results revealed that the XRD pattern of the AS-deposited thin film is non-crystalline(amorphous)in nature.The FESEM image shows the non-uniform shape of nanoparticles agglomerated separately,and the EDX spectrum shows the presence of Te,Zn,and O in the film.The I-V characteristics measurements indicate that the current density increases linearly with X-ray doses(0-250 cGy)for all applied voltages(1-6 V).The sensitivity of the thin film sensor has been found to be in the range of 0.37-0.94 mA/cm^(2)/Gy.The current-voltage measurement test for fading normalised in percentage to day 0 was found in the order of day 0>day 15>day 30>day 1>day 2.These results are expected to be beneficial for fabricating cheap and practical X-ray sensors.展开更多
Nowadays,OLEDs have shown aesthetic potential in smart cards,sensor displays,other electronic devices,sensitive medical devices and signal monitoring etc.due to their wide range of applications like low power consumpt...Nowadays,OLEDs have shown aesthetic potential in smart cards,sensor displays,other electronic devices,sensitive medical devices and signal monitoring etc.due to their wide range of applications like low power consumption,high contrast ratio,speed highly electroluminescent,wide viewing angle and fast response time.In this paper,a highly efficient organic LED ITO/V_(2)O_(5)/Alq3/TPBi/BPhen/LiF/Al with low turn-on voltage and high optically efficiency is presented including electrical and optical characteristics.The simulation of electrical characteristics like current versus applied voltage,current density versus applied voltage,recombination prefactor versus excess carrier density characteristics and optical characteristics like light flux versus current density,light flux versus applied voltage and optical efficiency versus applied voltage has been explained.The physical design,working principle and thickness of different layers along with the process of formation of singlet and triplet excitons are discussed in detail.Here double electron transport layer(ETL),cathode layers are used to enhance the electrical and optical efficiency of OLED.The operating voltage is found to be~3.2 V for the ITO/V_(2)O_(5)/Alq3/TPBi/BPhen/LiF/Al heterostructure based OLED.The designed organic LED has achieved the maximum optical efficiency at 3 V.展开更多
We present a study of the fabrication of monolayer MoS_2 on n-Si(111) substrates by modified thermal evaporation deposition and the optoelectrical properties of the resulting film. The as-grown MoS_2 ultrathin film is...We present a study of the fabrication of monolayer MoS_2 on n-Si(111) substrates by modified thermal evaporation deposition and the optoelectrical properties of the resulting film. The as-grown MoS_2 ultrathin film is about 10 nm thick, or about a few atomic layers of MoS_2. The film has a large optical absorption range of 300-700 nm and strong luminescence emission at 682 nm. The optical absorption range covered almost the entire ultraviolet to visible light range, which is very useful for making high-efficiency solar cells. Moreover, the MoS_2/Si heterojunction exhibited good rectification characteristics and excellent photovoltaic effects. The power conversion efficiency of the heterojunction device is about 1.79% under white light illumination of 10 m W/cm^2. The results show that the monolayer MoS_2 film will find many applications in high-efficiency optoelectronic devices.展开更多
ZnS films were prepared by pulsed laser deposition （PLD） on porous silicon （PS） substrates. This paper investigates the effect of annealing temperature on the structural, morphological, optical and electrical prop...ZnS films were prepared by pulsed laser deposition （PLD） on porous silicon （PS） substrates. This paper investigates the effect of annealing temperature on the structural, morphological, optical and electrical properties of ZnS/PS composites by x-ray diffraction （XRD）, scanning electron microscope （SEM）, photoluminescence （PL） and I-V characteristics. It is found that the ZnS films deposited on PS substrates were grown in preferred orientation along β-ZnS （111） direction, and the intensity of diffraction peak increases with increasing annealing temperature, which is attributed to the grain growth and the enhancement of crystallinity of ZnS films. The smooth and uniform surface of the as-prepared ZnS/PS composite becomes rougher through annealing treatment, which is related to grain growth at the higher annealing temperature. With the increase of annealing temperature, the intensity of self-activated luminescence of ZnS increases, while the luminescence intensity of PS decreases, and a new green emission located around 550 nm appeared in the PL spectra of ZnS/PS composites which is ascribed to the defect-center luminescence of ZnS. The I-V characteristics of ZnS/PS heterojunctions exhibited rectifying behavior, and the forward current increases with increasing annealing temperature.展开更多
The electrical performance of a photovoltaic (PV) silicon solar cell is described by its current–voltage (I–V) character-istic curve, which is in turn determined by device and material properties. In this study, an ...The electrical performance of a photovoltaic (PV) silicon solar cell is described by its current–voltage (I–V) character-istic curve, which is in turn determined by device and material properties. In this study, an investigation of the performance and device parameters of photovoltaic single crystalline silicon (Si.) solar cell of the construction n+pp++ PESC(Passivatted Emitter Solar Cell) at different conditions of solar irradiance, title angle and mirror boosting effects had been studied. Also the paper reports on the performance data of the Si. cell, using standard I–V characteristic curves to obtain output parameters and to show that there are possible performance degrading defects presents.展开更多
文摘A development of an acquisition of the characteristic of a solar panel by automatic load variation system is put into play and coupled to an instrumentation chain for taking account of temperature. A programmed digital microprocessor control enables this automation. Design and implementation of a device for automation of variations of the resistive load are powered by solar panel. It is provided by a PIC 16F877A running a computer program that we have developed on the basis of an algorithm according to the operation that we have set. By varying automatically the resistive load, we were able to automatically acquire the characteristic I-V and temperature of the solar panel. With automatic combinations of the 10 resistors, we have obtained 1024 measures of the characteristic curve of the solar cell which has a good accuracy. The change in load and temperature measurement allows us to have the characteristic curves parameterized by temperature.
基金supported by the Young Scientists Fund of the National Natural Science Foundation of China (Grant No. 61003082) the Science Fund for Creative Research Groups of the National Natural Science Foundation of China (Grant No. 60921062)
文摘As the fourth passive circuit component, a memristor is a nonlinear resistor that can ＂remember＂ the amount of charge passing through it. The characteristic of ＂remembering＂ the charge and non-volatility makes memristors great potential candidates in many fields. Nowadays, only a few groups have the ability to fabricate memristors, and most researchers study them by theoretic analysis and simulation. In this paper, we first analyse the theoretical base and characteristics of memristors, then use a simulation program with integrated circuit emphasis as our tool to simulate the theoretical model of memristors and change the parameters in the model to see the influence of each parameter on the characteristics. Our work supplies researchers engaged in memristor-based circuits with advice on how to choose the proper parameters.
文摘BaTiO3 thin film has been deposited on Si(100) substrate using sol-gel process and deposited by using spin – coating technique. The BaTiO3/Si(100) structures were studied by structural and electrical characteristics. The X-ray diffrac-tion of BaTiO3/Si(100) shows that the diffraction peaks become increasing sharp with increasing calcination tempera-tures indicating the enhance crystallinity of the films. Scanning electron microscopy of BaTiO3 thin films shows the crack free and uniform nature. The capacitance-voltage measurement of BaTiO3 thin film deposited on Si(100) an-nealed at 600℃ shows large frequency dispersion in the accumulation region. The current-voltage measurement of BaTiO3/Si shows the ideality factor was approaches to unity at 600℃.
文摘This study reports the dosimetric response of a(ZnO)_(0.2)(TeO_(2))_(0.8)thin film sensor irradiated with high-energy X-ray radiation at various doses.The spray pyrolysis method was used for the film deposition on soda-lime glass substrate using zinc acetate dehydrate and tellurium dioxide powder as the starting precursors.The structural and morphological properties of the film were determined.The I-V characteristics measurements were performed during irradiation with a 6 MV X-ray beam from a Linac.The results revealed that the XRD pattern of the AS-deposited thin film is non-crystalline(amorphous)in nature.The FESEM image shows the non-uniform shape of nanoparticles agglomerated separately,and the EDX spectrum shows the presence of Te,Zn,and O in the film.The I-V characteristics measurements indicate that the current density increases linearly with X-ray doses(0-250 cGy)for all applied voltages(1-6 V).The sensitivity of the thin film sensor has been found to be in the range of 0.37-0.94 mA/cm^(2)/Gy.The current-voltage measurement test for fading normalised in percentage to day 0 was found in the order of day 0>day 15>day 30>day 1>day 2.These results are expected to be beneficial for fabricating cheap and practical X-ray sensors.
文摘Nowadays,OLEDs have shown aesthetic potential in smart cards,sensor displays,other electronic devices,sensitive medical devices and signal monitoring etc.due to their wide range of applications like low power consumption,high contrast ratio,speed highly electroluminescent,wide viewing angle and fast response time.In this paper,a highly efficient organic LED ITO/V_(2)O_(5)/Alq3/TPBi/BPhen/LiF/Al with low turn-on voltage and high optically efficiency is presented including electrical and optical characteristics.The simulation of electrical characteristics like current versus applied voltage,current density versus applied voltage,recombination prefactor versus excess carrier density characteristics and optical characteristics like light flux versus current density,light flux versus applied voltage and optical efficiency versus applied voltage has been explained.The physical design,working principle and thickness of different layers along with the process of formation of singlet and triplet excitons are discussed in detail.Here double electron transport layer(ETL),cathode layers are used to enhance the electrical and optical efficiency of OLED.The operating voltage is found to be~3.2 V for the ITO/V_(2)O_(5)/Alq3/TPBi/BPhen/LiF/Al heterostructure based OLED.The designed organic LED has achieved the maximum optical efficiency at 3 V.
基金supported in parts by the National Natural Science Foundation of China (No. 60976071)the Scientific Project Program of Suzhou City (No. SYG201121)
文摘We present a study of the fabrication of monolayer MoS_2 on n-Si(111) substrates by modified thermal evaporation deposition and the optoelectrical properties of the resulting film. The as-grown MoS_2 ultrathin film is about 10 nm thick, or about a few atomic layers of MoS_2. The film has a large optical absorption range of 300-700 nm and strong luminescence emission at 682 nm. The optical absorption range covered almost the entire ultraviolet to visible light range, which is very useful for making high-efficiency solar cells. Moreover, the MoS_2/Si heterojunction exhibited good rectification characteristics and excellent photovoltaic effects. The power conversion efficiency of the heterojunction device is about 1.79% under white light illumination of 10 m W/cm^2. The results show that the monolayer MoS_2 film will find many applications in high-efficiency optoelectronic devices.
基金Project supported by the Research Foundation for Young Scientists in Innovation Engineering of Binzhou University (Grant NoBZXYQNLG200703)
文摘ZnS films were prepared by pulsed laser deposition （PLD） on porous silicon （PS） substrates. This paper investigates the effect of annealing temperature on the structural, morphological, optical and electrical properties of ZnS/PS composites by x-ray diffraction （XRD）, scanning electron microscope （SEM）, photoluminescence （PL） and I-V characteristics. It is found that the ZnS films deposited on PS substrates were grown in preferred orientation along β-ZnS （111） direction, and the intensity of diffraction peak increases with increasing annealing temperature, which is attributed to the grain growth and the enhancement of crystallinity of ZnS films. The smooth and uniform surface of the as-prepared ZnS/PS composite becomes rougher through annealing treatment, which is related to grain growth at the higher annealing temperature. With the increase of annealing temperature, the intensity of self-activated luminescence of ZnS increases, while the luminescence intensity of PS decreases, and a new green emission located around 550 nm appeared in the PL spectra of ZnS/PS composites which is ascribed to the defect-center luminescence of ZnS. The I-V characteristics of ZnS/PS heterojunctions exhibited rectifying behavior, and the forward current increases with increasing annealing temperature.
文摘The electrical performance of a photovoltaic (PV) silicon solar cell is described by its current–voltage (I–V) character-istic curve, which is in turn determined by device and material properties. In this study, an investigation of the performance and device parameters of photovoltaic single crystalline silicon (Si.) solar cell of the construction n+pp++ PESC(Passivatted Emitter Solar Cell) at different conditions of solar irradiance, title angle and mirror boosting effects had been studied. Also the paper reports on the performance data of the Si. cell, using standard I–V characteristic curves to obtain output parameters and to show that there are possible performance degrading defects presents.
