Violent free surface flows with strong fluid-solid interactions can produce a tremendous pressure load on structures, resu- lting in elastic and even plastic deformations. Modeling hydro-elastic problems with structur...Violent free surface flows with strong fluid-solid interactions can produce a tremendous pressure load on structures, resu- lting in elastic and even plastic deformations. Modeling hydro-elastic problems with structure deformations and a free surfaee breakup is difficult by using routine numerical methods. This paper presents an improved Smoothed Particle Hydrodynamics （SPH） method for modeling hydro-elastic problems. The fluid particles are used to model the free surface flows governed by Navier-Stokes equations, and the solid particles are used to model the dynamic movement and deformation of the elastic solid objects. The improved SPH method employs a Kernel Gradient Correction （KGC） technique to improve the computational accuracy and a Fluid-Solid Interface Treatment （FSIT） algorithm with the interface fluid and solid particles being treated as the virtual particles against their counterparts and a soft repulsive force to prevent the penetration and a corrective density approximation scheme to remove the numerical oscillations. Three typical numerical examples are simulated, including a head-on collision of two rubber rings, the dam break with an elastic gate and the water impact onto a forefront elastic plate. The obtained SPH results agree well with experimental observations and numerical results from other sources.展开更多
Experiments are conducted to investigate the dynamic response of a plate with elastic support under a regular wave slamming. The statistical analysis results obtained in different model testing cases are presented. Th...Experiments are conducted to investigate the dynamic response of a plate with elastic support under a regular wave slamming. The statistical analysis results obtained in different model testing cases are presented. The theoretical analysis of the plate vibrations(including the forced and free vibrations) is performed. Four characteristic stages of the plate vibration accelerations between two consecutive wave impacts are identified. The submergence durations of the plate during the wave action and the hydro-elastic effects are discussed. Finally, some useful conclusions are drawn.展开更多
The superstructures of marine structures supported by the elastic legs and located in the splash zone will subject to violent wave slamming and vibrate consequently during storms. A series of model tests are carried o...The superstructures of marine structures supported by the elastic legs and located in the splash zone will subject to violent wave slamming and vibrate consequently during storms. A series of model tests are carried out to investigate the wave impacting on the open structures supported elastically. Three kinds of models with different natural frequencies are designed. The characteristics of the wave pressures on the three models are compared. The durations of the uplift forces and the corresponding accelerations of the structure during wave impact are analyzed simultaneously. The distributions of the peak impact pressures on the subfaces of the plates with different supporting stiffness are given. The relationship between the uplift force on the three models and the relative clearance are obtained. The spectral properties of the slamming loads on the three different structures are compared, The experimental results indicate that the behaviors of the impact pressures, the uplift forces and accelerations of the plates with small natural frequencies are obviously different from those of the plates with larger natural frequencies within the range of the experimental parameters.展开更多
由于台风等恶劣海洋条件的影响,海上浮筏式养殖结构极易遭受破坏。浮筏式海水养殖结构系统由多个浮子、连接走板和系泊缆组成。文中研究了不同走板材料对浮筏结构在波浪中动力响应的影响。通过基于势流理论的软件WAMIT计算获得了浮子的...由于台风等恶劣海洋条件的影响,海上浮筏式养殖结构极易遭受破坏。浮筏式海水养殖结构系统由多个浮子、连接走板和系泊缆组成。文中研究了不同走板材料对浮筏结构在波浪中动力响应的影响。通过基于势流理论的软件WAMIT计算获得了浮子的附加质量系数。利用海洋工程软件OrcaFlex计算模拟了浮筏结构在波浪中的时历响应,并分析比较了采用不同走板材料的浮筏结构在海浪中的水弹性差异。研究结果表明,木制浮筏相对新型高密度聚乙烯(high density polyethylene,简称HDPE)材料在波浪中受到的弯矩更大,可能更容易受到破坏。另外,对比分析了直接计算的结构最大响应和基于瑞利分布预测的最大响应值(MPM),结果表明结构最大垂向运动基本符合瑞利分布,而水平运动最大值由于受系泊系统非线性影响,与瑞利分布有一定差异。展开更多
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11172306,11232012 and81271650)the New Century Excellent Talents(Grant No.NCET-10-0041)the 100 Talents Programme of the Chinese Academy of Sciences
文摘Violent free surface flows with strong fluid-solid interactions can produce a tremendous pressure load on structures, resu- lting in elastic and even plastic deformations. Modeling hydro-elastic problems with structure deformations and a free surfaee breakup is difficult by using routine numerical methods. This paper presents an improved Smoothed Particle Hydrodynamics （SPH） method for modeling hydro-elastic problems. The fluid particles are used to model the free surface flows governed by Navier-Stokes equations, and the solid particles are used to model the dynamic movement and deformation of the elastic solid objects. The improved SPH method employs a Kernel Gradient Correction （KGC） technique to improve the computational accuracy and a Fluid-Solid Interface Treatment （FSIT） algorithm with the interface fluid and solid particles being treated as the virtual particles against their counterparts and a soft repulsive force to prevent the penetration and a corrective density approximation scheme to remove the numerical oscillations. Three typical numerical examples are simulated, including a head-on collision of two rubber rings, the dam break with an elastic gate and the water impact onto a forefront elastic plate. The obtained SPH results agree well with experimental observations and numerical results from other sources.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.51579103,51709118)
文摘Experiments are conducted to investigate the dynamic response of a plate with elastic support under a regular wave slamming. The statistical analysis results obtained in different model testing cases are presented. The theoretical analysis of the plate vibrations(including the forced and free vibrations) is performed. Four characteristic stages of the plate vibration accelerations between two consecutive wave impacts are identified. The submergence durations of the plate during the wave action and the hydro-elastic effects are discussed. Finally, some useful conclusions are drawn.
基金supported by the National Natural Science Foundation of China(Grant No.51179030)the Innovative Research Group National Natural Science Foundation of China(Grant No.51309056)
文摘The superstructures of marine structures supported by the elastic legs and located in the splash zone will subject to violent wave slamming and vibrate consequently during storms. A series of model tests are carried out to investigate the wave impacting on the open structures supported elastically. Three kinds of models with different natural frequencies are designed. The characteristics of the wave pressures on the three models are compared. The durations of the uplift forces and the corresponding accelerations of the structure during wave impact are analyzed simultaneously. The distributions of the peak impact pressures on the subfaces of the plates with different supporting stiffness are given. The relationship between the uplift force on the three models and the relative clearance are obtained. The spectral properties of the slamming loads on the three different structures are compared, The experimental results indicate that the behaviors of the impact pressures, the uplift forces and accelerations of the plates with small natural frequencies are obviously different from those of the plates with larger natural frequencies within the range of the experimental parameters.
文摘由于台风等恶劣海洋条件的影响,海上浮筏式养殖结构极易遭受破坏。浮筏式海水养殖结构系统由多个浮子、连接走板和系泊缆组成。文中研究了不同走板材料对浮筏结构在波浪中动力响应的影响。通过基于势流理论的软件WAMIT计算获得了浮子的附加质量系数。利用海洋工程软件OrcaFlex计算模拟了浮筏结构在波浪中的时历响应,并分析比较了采用不同走板材料的浮筏结构在海浪中的水弹性差异。研究结果表明,木制浮筏相对新型高密度聚乙烯(high density polyethylene,简称HDPE)材料在波浪中受到的弯矩更大,可能更容易受到破坏。另外,对比分析了直接计算的结构最大响应和基于瑞利分布预测的最大响应值(MPM),结果表明结构最大垂向运动基本符合瑞利分布,而水平运动最大值由于受系泊系统非线性影响,与瑞利分布有一定差异。
