An austenitic stainless steel with 6 wt% Si and multiple secondary phases was produced with the aim to achieve enhanced plasticity during hot deformation.The micro structure of the steel after fracture was characteriz...An austenitic stainless steel with 6 wt% Si and multiple secondary phases was produced with the aim to achieve enhanced plasticity during hot deformation.The micro structure of the steel after fracture was characterized via electron back-scattered diffraction,transmission Kikuchi diffraction and scanning transmission electron microscopy.From the tail of the gage to the necking region,the microstructure of the material evolved from low-angle grain boundaries(LAGB s) to mixtures of LAGBs and high-angle grain boundaries(HAGBs),and fine equiaxed recrystallized grains.The elongation to failure in the tensile test exceeds 167%.During the hot deformation,continuous dynamic recrystallization of the austenitic matrix was promoted by the multiple secondary phases.The dislocations introduced by the secondary phases were rearranged and continuously transformed into HAGBs.The initially coarse grains(30.5 μm) were refined into ultra-fine equiaxed grains(1 μm),which contributed significantly the enhanced plasticity during hot deformation of the steel.In the necking area of the sample,twins were nucleated in the stress concentration regions and accommodated the local strain by discontinuous dynamic recrystallization,which was also beneficial to improving the plasticity.展开更多
Low thermal conductivity,compatible thermal expansion coefficient,and good calcium–magnesium–aluminosilicate(CMAS)corrosion resistance are critical requirements for environmental barrier coatings used on silicon-bas...Low thermal conductivity,compatible thermal expansion coefficient,and good calcium–magnesium–aluminosilicate(CMAS)corrosion resistance are critical requirements for environmental barrier coatings used on silicon-based ceramics.RE2Si2O7(RE=rare earth)has been widely recognized as one of the most promising candidates for environmental barrier coatings due to its good water vapor corrosion resistance.However,the relatively high thermal conductivity and poor resistance to CMAS corrosion have limited its practical application.Inspired by the high entropy effect,in this work,a novel rare earth disilicate(Lu_(_(1/7))Yb_(_(1/7))Sc_(_(1/7))Er_(_(1/7))Y_(_(1/7))Ho_(_(1/7))Dy_(_(1/7)))2Si2O7((7RE_(_(1/7)))2Si2O7)has been designed and synthesized by a solid reaction process.(7RE_(_(1/7)))2Si2O7 showed a low thermal conductivity of 1.81 W·m^(−1)·K^(−1)at 1273 K.Furthermore,the thermal expansion coefficient of(7RE_(_(1/7)))_(2)Si_(2)O_(7)(4.07×10^(−6)℃^(−1)from room temperature(RT)to 1400℃)is close to that of the SiC-based ceramic matrix composites(SiC-CMCs)((4.5–5.5)×10^(−6)℃^(−1)).Additionally,(7RE_(_(1/7)))2Si2O7 exhibited excellent resistance to CMAS corrosion.When exposed to CMAS at 1300℃for 48 h,the reaction layer thickness was 22μm.The improved performance of(7RE_(_(1/7)))2Si2O7 highlights its potential as a promising candidate for thermal/environmental barrier coatings.展开更多
文摘An austenitic stainless steel with 6 wt% Si and multiple secondary phases was produced with the aim to achieve enhanced plasticity during hot deformation.The micro structure of the steel after fracture was characterized via electron back-scattered diffraction,transmission Kikuchi diffraction and scanning transmission electron microscopy.From the tail of the gage to the necking region,the microstructure of the material evolved from low-angle grain boundaries(LAGB s) to mixtures of LAGBs and high-angle grain boundaries(HAGBs),and fine equiaxed recrystallized grains.The elongation to failure in the tensile test exceeds 167%.During the hot deformation,continuous dynamic recrystallization of the austenitic matrix was promoted by the multiple secondary phases.The dislocations introduced by the secondary phases were rearranged and continuously transformed into HAGBs.The initially coarse grains(30.5 μm) were refined into ultra-fine equiaxed grains(1 μm),which contributed significantly the enhanced plasticity during hot deformation of the steel.In the necking area of the sample,twins were nucleated in the stress concentration regions and accommodated the local strain by discontinuous dynamic recrystallization,which was also beneficial to improving the plasticity.
基金the National Key R&D Program of China(No.2022YFE0121200)the National Natural Science Foundation of China(Nos.52371052 and 52073029).
文摘Low thermal conductivity,compatible thermal expansion coefficient,and good calcium–magnesium–aluminosilicate(CMAS)corrosion resistance are critical requirements for environmental barrier coatings used on silicon-based ceramics.RE2Si2O7(RE=rare earth)has been widely recognized as one of the most promising candidates for environmental barrier coatings due to its good water vapor corrosion resistance.However,the relatively high thermal conductivity and poor resistance to CMAS corrosion have limited its practical application.Inspired by the high entropy effect,in this work,a novel rare earth disilicate(Lu_(_(1/7))Yb_(_(1/7))Sc_(_(1/7))Er_(_(1/7))Y_(_(1/7))Ho_(_(1/7))Dy_(_(1/7)))2Si2O7((7RE_(_(1/7)))2Si2O7)has been designed and synthesized by a solid reaction process.(7RE_(_(1/7)))2Si2O7 showed a low thermal conductivity of 1.81 W·m^(−1)·K^(−1)at 1273 K.Furthermore,the thermal expansion coefficient of(7RE_(_(1/7)))_(2)Si_(2)O_(7)(4.07×10^(−6)℃^(−1)from room temperature(RT)to 1400℃)is close to that of the SiC-based ceramic matrix composites(SiC-CMCs)((4.5–5.5)×10^(−6)℃^(−1)).Additionally,(7RE_(_(1/7)))2Si2O7 exhibited excellent resistance to CMAS corrosion.When exposed to CMAS at 1300℃for 48 h,the reaction layer thickness was 22μm.The improved performance of(7RE_(_(1/7)))2Si2O7 highlights its potential as a promising candidate for thermal/environmental barrier coatings.
