In recent years, several attempts have been made in designing planar array antennas with high directivity. This paper is aimed at investigating the impact of element spacing on the directivity of planar array of monop...In recent years, several attempts have been made in designing planar array antennas with high directivity. This paper is aimed at investigating the impact of element spacing on the directivity of planar array of monopole antenna. The directivity of antenna with reduced grating lobes can be obtained by carefully varying the inter-element spacing of array antenna. Based on this conception, this paper presents the investigation carried out on the relationship between inter-element spacing and the directivity of planar array of monopole antenna. It went further to highlight the effect on the total fields radiated by the antenna. The inter-element spacing is one of the most important antenna parameters that determine the directivity of the antenna. For a planar array of monopole, the directivity can be improved by varying the inter-element spacing. Four elements uniform planar array antenna and Hadamard matrix method was used to determine element positioning in the array matrix. The simulated results obtained using Matlab, showed that good directivity was obtained by using element spacing between 0.1λ - 0.5λ. Increasing the spacing beyond 0.6λ - 1.0λ also improved the directivity, but generated many grating lobes. As inter-element spacing increased, the grating lobes increased in size, number and levels. The study, therefore, inferred that the best directivity (radiation pattern) can only be obtained when the element spacing is within 0.1 - 0.5λ.展开更多
A grating lobes suppression method for chirp-subpulse stepped frequency（CSSF） signals is proposed, which is applied to deformation monitoring using the ground based synthetic aperture radar（GB-SAR） system. This me...A grating lobes suppression method for chirp-subpulse stepped frequency（CSSF） signals is proposed, which is applied to deformation monitoring using the ground based synthetic aperture radar（GB-SAR） system. This method is based on accurate estimation and correction of the phase and amplitude error along two dimensions（range and azimuth）, i.e., the error estimation inside the subpulse（in-subpulse error） and across the stepped frequency subpulses（cross-subpulse error） of transmitted CSSF signals. Validated both with simulated data and experimental data recorded in the deformation monitoring campaign, it can be seen that the method as well as the relative conclusions can be fully and effectively applied to most of the stepped frequency systems.展开更多
文摘In recent years, several attempts have been made in designing planar array antennas with high directivity. This paper is aimed at investigating the impact of element spacing on the directivity of planar array of monopole antenna. The directivity of antenna with reduced grating lobes can be obtained by carefully varying the inter-element spacing of array antenna. Based on this conception, this paper presents the investigation carried out on the relationship between inter-element spacing and the directivity of planar array of monopole antenna. It went further to highlight the effect on the total fields radiated by the antenna. The inter-element spacing is one of the most important antenna parameters that determine the directivity of the antenna. For a planar array of monopole, the directivity can be improved by varying the inter-element spacing. Four elements uniform planar array antenna and Hadamard matrix method was used to determine element positioning in the array matrix. The simulated results obtained using Matlab, showed that good directivity was obtained by using element spacing between 0.1λ - 0.5λ. Increasing the spacing beyond 0.6λ - 1.0λ also improved the directivity, but generated many grating lobes. As inter-element spacing increased, the grating lobes increased in size, number and levels. The study, therefore, inferred that the best directivity (radiation pattern) can only be obtained when the element spacing is within 0.1 - 0.5λ.
基金supported by the National Natural Science Foundation of China(6112010600461225005)
文摘A grating lobes suppression method for chirp-subpulse stepped frequency（CSSF） signals is proposed, which is applied to deformation monitoring using the ground based synthetic aperture radar（GB-SAR） system. This method is based on accurate estimation and correction of the phase and amplitude error along two dimensions（range and azimuth）, i.e., the error estimation inside the subpulse（in-subpulse error） and across the stepped frequency subpulses（cross-subpulse error） of transmitted CSSF signals. Validated both with simulated data and experimental data recorded in the deformation monitoring campaign, it can be seen that the method as well as the relative conclusions can be fully and effectively applied to most of the stepped frequency systems.
