Strength and deformation behaviors of rockfill materials,key factors for determining the stability of dams,pertain strongly to the grain crushing characteristics.In this study,single-particle crushing tests were carri...Strength and deformation behaviors of rockfill materials,key factors for determining the stability of dams,pertain strongly to the grain crushing characteristics.In this study,single-particle crushing tests were carried out on rockfill materials with nominal particle diameters of 2.5 mm,5 mm and 10 mm to investigate the particle size effect on the single-particle strength and the relationship between the characteristic stress and probability of non-failure.Test data were found to be described by the Weibull distribution with the Weibull modulus of 3.24.Assemblies with uniform nominal grains were then subjected to one-dimensional compression tests at eight levels of vertical stress with a maximum of 100 MPa.The yield stress in one-dimensional compression tests increased with decreasing the particle size,which could be estimated from the single-particle crushing tests.The void ratio-vertical stress curve could be predicted by an exponential function.The particle size distribution curve increased obviously with applied stresses less than 16 MPa and gradually reached the ultimate fractal grading.The relative breakage index became constant with stress up to 64 MPa and was obtained from the ultimate grading at the fractal dimension(a?2:7).A hyperbolical function was also found useful for describing the relationship between the relative breakage index and input work during one-dimensional compression tests.展开更多
Crushing of grains can greatly influence the strength,dilatancy,and stress-strain relationship of rockfill materials.The critical state line(CSL)in the void ratio versus mean effective stress plane was extended to the...Crushing of grains can greatly influence the strength,dilatancy,and stress-strain relationship of rockfill materials.The critical state line(CSL)in the void ratio versus mean effective stress plane was extended to the breakage critical state plane(BCSP).A state void-ratio-pressure index that incorporated the effect of grain crushing was proposed according to the BCSP.Rowe’s stress-dilatancy equation was modified by adding the breakage voidratio-pressure index,which was also incorporated into the formulations of the bounding stress ratio and plastic modulus.A BCSP-based bounding surface plasticity model was proposed to describe the state-dependent stressstrain behaviors and the evolution of grain crushing during shearing process of rockfill materials,and was shown to sufficiently capture the breakage phenomenon.展开更多
This paper presents a combined method to model grain crushing effects with discrete element method.This method combines the two most commonly used concepts to model grain crushing in DEM,i.e.the replacement method and...This paper presents a combined method to model grain crushing effects with discrete element method.This method combines the two most commonly used concepts to model grain crushing in DEM,i.e.the replacement method and the agglomerate method,so that it is both accurate and efficient.The method can be easily implemented.The performance is shown by several DEM simulations of biaxial tests.Particles with different crush-abilities are modeled.DEM simulation results with and without grain crushing are compared and discussed.The change of grain size distribution due to grain crushing is also investigated.展开更多
Grain crushing is commonly encountered in deep foundation engineering,high rockfill dam engineering,railway engineering,mining engineering,coastal engineering,petroleum engineering,and other geoscience application.Gra...Grain crushing is commonly encountered in deep foundation engineering,high rockfill dam engineering,railway engineering,mining engineering,coastal engineering,petroleum engineering,and other geoscience application.Grain crushing is affected by fundamental soil characteristics,such as their mineral strength,grain size and distribution,grain shape,density and specimen size,and also by external factors including stress magnitude and path,loading rate and duration,degree of saturation,temperature and geochemical environment.Crushable material becomes a series of different materials with the change in its grading during grain crushing,resulting in a decrease in strength and dilatancy and an increase in compressibility.Effects of grain crushing on strength,dilatancy,deformation and failure mechanisms have been extensively investigated through laboratory testing,discrete element method(DEM)modelling,Weibull statistics,and constitutive modelling within the framework of the extended crushing-dependent critical state theory or the energy-based theory.Eleven papers summarized in this review article for this special issue addressed the above issues in grain crushing through the advanced testing and modelling.展开更多
基金financial support from the 111 Project (Grant No. B13024)the National Science Foundation of China (Grant Nos. 51509024, 51678094 and 51578096)+2 种基金the Fundamental Research Funds for the Central Universities (Grant No. 106112017CDJQJ208848)the Special Financial Grant from the China Postdoctoral Science Foundation (Grant No. 2017T100681)the State Key Laboratory for Geo Mechanics and Deep Underground Engineering, China University of Mining and Technology (Grant No. SKLGDUEK1810)
文摘Strength and deformation behaviors of rockfill materials,key factors for determining the stability of dams,pertain strongly to the grain crushing characteristics.In this study,single-particle crushing tests were carried out on rockfill materials with nominal particle diameters of 2.5 mm,5 mm and 10 mm to investigate the particle size effect on the single-particle strength and the relationship between the characteristic stress and probability of non-failure.Test data were found to be described by the Weibull distribution with the Weibull modulus of 3.24.Assemblies with uniform nominal grains were then subjected to one-dimensional compression tests at eight levels of vertical stress with a maximum of 100 MPa.The yield stress in one-dimensional compression tests increased with decreasing the particle size,which could be estimated from the single-particle crushing tests.The void ratio-vertical stress curve could be predicted by an exponential function.The particle size distribution curve increased obviously with applied stresses less than 16 MPa and gradually reached the ultimate fractal grading.The relative breakage index became constant with stress up to 64 MPa and was obtained from the ultimate grading at the fractal dimension(a?2:7).A hyperbolical function was also found useful for describing the relationship between the relative breakage index and input work during one-dimensional compression tests.
基金financial support from the 111 Project (Grant No. B13024)the National Science Foundation of China (Grant Nos. 51509024, 51678094 and 51578096)+1 种基金the Fundamental Research Funds for the Central Universities (Grant No. 106112017CDJQJ208848)the Special Financial Grant from the China Postdoctoral Science Foundation (Grant No. 2017T100681)
文摘Crushing of grains can greatly influence the strength,dilatancy,and stress-strain relationship of rockfill materials.The critical state line(CSL)in the void ratio versus mean effective stress plane was extended to the breakage critical state plane(BCSP).A state void-ratio-pressure index that incorporated the effect of grain crushing was proposed according to the BCSP.Rowe’s stress-dilatancy equation was modified by adding the breakage voidratio-pressure index,which was also incorporated into the formulations of the bounding stress ratio and plastic modulus.A BCSP-based bounding surface plasticity model was proposed to describe the state-dependent stressstrain behaviors and the evolution of grain crushing during shearing process of rockfill materials,and was shown to sufficiently capture the breakage phenomenon.
文摘This paper presents a combined method to model grain crushing effects with discrete element method.This method combines the two most commonly used concepts to model grain crushing in DEM,i.e.the replacement method and the agglomerate method,so that it is both accurate and efficient.The method can be easily implemented.The performance is shown by several DEM simulations of biaxial tests.Particles with different crush-abilities are modeled.DEM simulation results with and without grain crushing are compared and discussed.The change of grain size distribution due to grain crushing is also investigated.
基金financial support from the National Science Foundation of China (Grant Nos. 51922024, 41831282, 51678094 and 51578096)
文摘Grain crushing is commonly encountered in deep foundation engineering,high rockfill dam engineering,railway engineering,mining engineering,coastal engineering,petroleum engineering,and other geoscience application.Grain crushing is affected by fundamental soil characteristics,such as their mineral strength,grain size and distribution,grain shape,density and specimen size,and also by external factors including stress magnitude and path,loading rate and duration,degree of saturation,temperature and geochemical environment.Crushable material becomes a series of different materials with the change in its grading during grain crushing,resulting in a decrease in strength and dilatancy and an increase in compressibility.Effects of grain crushing on strength,dilatancy,deformation and failure mechanisms have been extensively investigated through laboratory testing,discrete element method(DEM)modelling,Weibull statistics,and constitutive modelling within the framework of the extended crushing-dependent critical state theory or the energy-based theory.Eleven papers summarized in this review article for this special issue addressed the above issues in grain crushing through the advanced testing and modelling.
