The as-cast Mg-8 Li-xZn-yGd(x=1 2, 3,4;y=1,2;wt.%)alloys were prepared in a vacuum induction furnace and their microstructure and mechanical properties were investigated. The results show that the increase of Zn conte...The as-cast Mg-8 Li-xZn-yGd(x=1 2, 3,4;y=1,2;wt.%)alloys were prepared in a vacuum induction furnace and their microstructure and mechanical properties were investigated. The results show that the increase of Zn content results in the volume fraction of W-phase(Mg3 Zn3 Gd2) increasing while that of Mg3 Gd phase decreasing. The strength of Mg-8 Li-xZn-1 Gd alloys is improved with the increase of Zn content,which is ascribed to the second phase strengthening of fine strip-like W-phase and the solid solution strengthening of Zn element.For Mg-8 Li-4 Zn-yGd alloys,the increase of Gd content leads to the appearance of coarse and discontinuous net-like W-phase, which decreases the strength. The Mg-8 Li-4 Zn-1 Gd alloy exhibits an optimum comprehensive performance with the yield strength, ultimate tensile strength and elongation of 154.7 MPa, 197.0 MPa and 12.4%, respectively. In addition,the aging behavior of the typical alloys was also investigated.展开更多
Mg-Li-Gd alloys were prepared by electrochemical codeposition from LiCl-KCl-MgCl 2 -Gd 2 O 3 melts on molybdenum electrode with constant current density at 823 and 973 K. The microstructure of the Mg-Li-Gd alloys was ...Mg-Li-Gd alloys were prepared by electrochemical codeposition from LiCl-KCl-MgCl 2 -Gd 2 O 3 melts on molybdenum electrode with constant current density at 823 and 973 K. The microstructure of the Mg-Li-Gd alloys was analyzed by X-ray diffraction （XRD）, optical microscopy （OM） and scanning electron microscopy （SEM）. The results show that magnesium and gadolinium deposit mainly in the first 30 min, and the alloy obtained contains 96.53% Mg, 0.27% Li and 3.20% Gd （mass fraction）. Then, the reduction of lithium ions occurs quickly. The composition of alloy can be adjusted by controlling electrolysis time or Gd 2 O 3 concentration in LiCl-KCl melts. With the addition of Gd into Mg-Li alloys, the corrosion resistance of the alloys is enhanced. XRD results suggest that Mg 3 Gd and Mg 2 Gd can be formed in Mg-Li-Gd alloys. The distribution of Gd element in Mg-Li-Gd alloys indicates that Gd element mainly distributes at the grain boundaries of Mg-Li-Gd alloys.展开更多
基金supported by the National Natural Science Foundation of China(No.52071093,51871069)the Fundamental Research Funds for the Central Universities,China(No.3072021CF1008)the Open Funds of the State Key Laboratory of Rare Earth Resource Utilization,China(No.RERU2020012)。
基金Project(2016YFB0301004)supported by the National Key Research and Development Program of ChinaProject(51771115)supported by the National Natural Science Foundation of China+3 种基金Project(6141B06310106)supported by the Joint Fund for Space Science and Technology,ChinaProject(009-031-001)supported by the Science and Technology Innovation Program,ChinaProject(USCAST2016-18)supported by the Research Program of Joint Research Center of Advanced Spaceflight Technologies,ChinaProject(SAST2016048)supported by the Science Innovation Foundation of Shanghai Academy of Spaceflight Technology,China
文摘The as-cast Mg-8 Li-xZn-yGd(x=1 2, 3,4;y=1,2;wt.%)alloys were prepared in a vacuum induction furnace and their microstructure and mechanical properties were investigated. The results show that the increase of Zn content results in the volume fraction of W-phase(Mg3 Zn3 Gd2) increasing while that of Mg3 Gd phase decreasing. The strength of Mg-8 Li-xZn-1 Gd alloys is improved with the increase of Zn content,which is ascribed to the second phase strengthening of fine strip-like W-phase and the solid solution strengthening of Zn element.For Mg-8 Li-4 Zn-yGd alloys,the increase of Gd content leads to the appearance of coarse and discontinuous net-like W-phase, which decreases the strength. The Mg-8 Li-4 Zn-1 Gd alloy exhibits an optimum comprehensive performance with the yield strength, ultimate tensile strength and elongation of 154.7 MPa, 197.0 MPa and 12.4%, respectively. In addition,the aging behavior of the typical alloys was also investigated.
基金Project(2009AA050702)supported by the National High-tech Research and Development Program of ChinaProject(GC06A212)supported by the Scientific Technology Project of Heilongjiang Province,China+2 种基金Project(50871033)supported by the National Natural Science Foundation of ChinaProject(208181)supported by the Key Project of Ministry of Education,ChinaProject(HEUCF101002)supported by the Fundamental Research Funds for the Central Universities,China
文摘Mg-Li-Gd alloys were prepared by electrochemical codeposition from LiCl-KCl-MgCl 2 -Gd 2 O 3 melts on molybdenum electrode with constant current density at 823 and 973 K. The microstructure of the Mg-Li-Gd alloys was analyzed by X-ray diffraction （XRD）, optical microscopy （OM） and scanning electron microscopy （SEM）. The results show that magnesium and gadolinium deposit mainly in the first 30 min, and the alloy obtained contains 96.53% Mg, 0.27% Li and 3.20% Gd （mass fraction）. Then, the reduction of lithium ions occurs quickly. The composition of alloy can be adjusted by controlling electrolysis time or Gd 2 O 3 concentration in LiCl-KCl melts. With the addition of Gd into Mg-Li alloys, the corrosion resistance of the alloys is enhanced. XRD results suggest that Mg 3 Gd and Mg 2 Gd can be formed in Mg-Li-Gd alloys. The distribution of Gd element in Mg-Li-Gd alloys indicates that Gd element mainly distributes at the grain boundaries of Mg-Li-Gd alloys.
