Rapidly solidified Al100-x-Cux alloys （x = 5, 10, 15, 25, 35 wt%） were prepared and analyzed. High cooling rate increased the Cu solubility in α-AI matrix. The influence of the cooling rate on Cu solubility extensi...Rapidly solidified Al100-x-Cux alloys （x = 5, 10, 15, 25, 35 wt%） were prepared and analyzed. High cooling rate increased the Cu solubility in α-AI matrix. The influence of the cooling rate on Cu solubility extension in AI was experimentally simulated. Thus the pouring was performed in metallic die and by melt spinning-low pressure （MS- LP） technique. Melt processing by liquid quenching was performed using a self-designed melt spinning set-up which combined the cooling technology of a melt jet on the spinning disc with the principle of the mold feeding from low pressure casting technology. The thickness of the melt-spun ribbons was in the range of 30-70 μm. The cooling rate provided by MS-LP was within 105-106 K/s after the device calibration. The obtained alloys were characterized from structural, thermal and mechanical point of view. Optical microscopy and scanning electron microscopy were employed for the microstructural characterization which was followed by X-ray analysis. The thermal properties were evaluated by dilatometric and differential scanning calorimetric measurements. Vickers microhardness measurements were performed in the study. In the case of the hypereutectic alloy with 35 wt% Cu obtained by MS-LP method, the microhardness value increased by 45% compared to the same alloy obtained by gravity casting method. This was due to the extended solubility of the alloying element in the α-AI solid solution.展开更多
Evolution laws of microstructures,mechanical properties,and fractographs after different solution temperatures were investigated through various analysis methods.With the increasing solution temperatures,contents of t...Evolution laws of microstructures,mechanical properties,and fractographs after different solution temperatures were investigated through various analysis methods.With the increasing solution temperatures,contents of the primaryαphase decreased,and contents of transformedβstructures increased.Lamellarαgrains dominated the characteristics of transformedβstructures,and widths of secondaryαlamellas increased monotonously.For as-forged alloy,large silicides with equiaxed and rod-like morphologies,and nano-scale silicides were found.Silicides with large sizes might be(Ti,Zr,Nb)_(5)Si_(3) and(Ti,Zr,Nb)_(6)Si_(3).Rod-like silicides with small sizes precipitated in retainedβphase,exhibiting near 45°angles withα/βboundaries.Retainedβphases in as-heat treated alloys were incontinuous.980STA exhibited an excellent combination of room temperature(RT)and 650°C mechanical properties.Characteristics of fracture surfaces largely depended on the evolutions of microstructures.Meanwhile,silicides promoted the formation of mico-voids.展开更多
The effect of mineral oil on the mechanical properties and fractographs of Fe3(Al,Cr,Zr) in termetallic alloy has been investigated. The results show that the tensile ductility of the Fe3(Al,Cr,Zr) alloy tested in oil...The effect of mineral oil on the mechanical properties and fractographs of Fe3(Al,Cr,Zr) in termetallic alloy has been investigated. The results show that the tensile ductility of the Fe3(Al,Cr,Zr) alloy tested in oil is comparable with the results obtained in oxygen and is in sensitive to strain rate. The fracture mode of the Fe3(Al,Cr,Zr) alloy treated at 700℃/1.5 h and tested in oil, is cleavage and with dimples in some areas.展开更多
Scanning electronic microscopy (SEM) was employed to investigate fractographs of sandstone in mine roof strata under thermal-mechanical coupled effect. Based on the evolution of sandstone surface morphology in the fai...Scanning electronic microscopy (SEM) was employed to investigate fractographs of sandstone in mine roof strata under thermal-mechanical coupled effect. Based on the evolution of sandstone surface morphology in the failure process and frac- tography, the fracture mechanism was studied and classified under meso and mi- cro scales, respectively. The differences between fractographs under different tem- peratures were examined in detail. Under high temperature, fatigue fracture and plastic deformation occurred in the fracture surface. Therefore, the temperature was manifested by these phenomena to influence strongly on micro failure mechanism of sandstone. In addition, the failure mechanism would transit from brittle failure mechanism at low temperature to coupled brittle-ductile failure mechanism at high temperature. The variation of sandstone strength under differ- ent temperature can be attributed to the occurrence of plastic deformation, fatigue fracture, and microcracking. The fatigue striations in the fracture surfaces under high temperature may be interpreted as micro fold. And the coupled effect of tem- perature and tensile stress may be another formation mechanism of micro fold in geology.展开更多
基金supported by the Sectoral Operational Programme Human Resources Development(SOP HRD)ID59321 financed from the European Social Fundsupported by the Romanian Government
文摘Rapidly solidified Al100-x-Cux alloys （x = 5, 10, 15, 25, 35 wt%） were prepared and analyzed. High cooling rate increased the Cu solubility in α-AI matrix. The influence of the cooling rate on Cu solubility extension in AI was experimentally simulated. Thus the pouring was performed in metallic die and by melt spinning-low pressure （MS- LP） technique. Melt processing by liquid quenching was performed using a self-designed melt spinning set-up which combined the cooling technology of a melt jet on the spinning disc with the principle of the mold feeding from low pressure casting technology. The thickness of the melt-spun ribbons was in the range of 30-70 μm. The cooling rate provided by MS-LP was within 105-106 K/s after the device calibration. The obtained alloys were characterized from structural, thermal and mechanical point of view. Optical microscopy and scanning electron microscopy were employed for the microstructural characterization which was followed by X-ray analysis. The thermal properties were evaluated by dilatometric and differential scanning calorimetric measurements. Vickers microhardness measurements were performed in the study. In the case of the hypereutectic alloy with 35 wt% Cu obtained by MS-LP method, the microhardness value increased by 45% compared to the same alloy obtained by gravity casting method. This was due to the extended solubility of the alloying element in the α-AI solid solution.
基金The authors would like to gratefully acknowledge the support of Industrial Strengthen Foundation Project of Ministry of Industry and Information Technology,PRC(TC150B5C0-02).
文摘Evolution laws of microstructures,mechanical properties,and fractographs after different solution temperatures were investigated through various analysis methods.With the increasing solution temperatures,contents of the primaryαphase decreased,and contents of transformedβstructures increased.Lamellarαgrains dominated the characteristics of transformedβstructures,and widths of secondaryαlamellas increased monotonously.For as-forged alloy,large silicides with equiaxed and rod-like morphologies,and nano-scale silicides were found.Silicides with large sizes might be(Ti,Zr,Nb)_(5)Si_(3) and(Ti,Zr,Nb)_(6)Si_(3).Rod-like silicides with small sizes precipitated in retainedβphase,exhibiting near 45°angles withα/βboundaries.Retainedβphases in as-heat treated alloys were incontinuous.980STA exhibited an excellent combination of room temperature(RT)and 650°C mechanical properties.Characteristics of fracture surfaces largely depended on the evolutions of microstructures.Meanwhile,silicides promoted the formation of mico-voids.
文摘The effect of mineral oil on the mechanical properties and fractographs of Fe3(Al,Cr,Zr) in termetallic alloy has been investigated. The results show that the tensile ductility of the Fe3(Al,Cr,Zr) alloy tested in oil is comparable with the results obtained in oxygen and is in sensitive to strain rate. The fracture mode of the Fe3(Al,Cr,Zr) alloy treated at 700℃/1.5 h and tested in oil, is cleavage and with dimples in some areas.
基金Supported by the Open Research Project of State Key Laboratory of Coal Resources and Safe Mining (China University of Mining and Technology) (Grant No. 2007-08)the National Natural Science Foundation of China (Grant Nos. 50674092, 50221402, 50579042, 50620130440, 50639100, 50490272)+1 种基金the National Basic Research Program of China (Grant No. 2002CB412707)the Program for New Century Excellent Talents in University (Grant No. NCET-04-0491)
文摘Scanning electronic microscopy (SEM) was employed to investigate fractographs of sandstone in mine roof strata under thermal-mechanical coupled effect. Based on the evolution of sandstone surface morphology in the failure process and frac- tography, the fracture mechanism was studied and classified under meso and mi- cro scales, respectively. The differences between fractographs under different tem- peratures were examined in detail. Under high temperature, fatigue fracture and plastic deformation occurred in the fracture surface. Therefore, the temperature was manifested by these phenomena to influence strongly on micro failure mechanism of sandstone. In addition, the failure mechanism would transit from brittle failure mechanism at low temperature to coupled brittle-ductile failure mechanism at high temperature. The variation of sandstone strength under differ- ent temperature can be attributed to the occurrence of plastic deformation, fatigue fracture, and microcracking. The fatigue striations in the fracture surfaces under high temperature may be interpreted as micro fold. And the coupled effect of tem- perature and tensile stress may be another formation mechanism of micro fold in geology.
