We fabricated dye-sensitized solar cells including fluorinated gel electrolyte and studied about the relationship between the performance of the solar cells and the aggregation state of TiO2 nano-particles on electrod...We fabricated dye-sensitized solar cells including fluorinated gel electrolyte and studied about the relationship between the performance of the solar cells and the aggregation state of TiO2 nano-particles on electrodes. As for the performance of the cell, the I-V characteristics were measured under irradiation. The combination of TiO2 nanoparticles with different size plays an important role in bringing unevenness to realize a large surface area, which is critical for the high performance of the cells.展开更多
Fluoroalkyl end-capped acrylic acid oligomer [RF-(ACA)n-RF]/hexagonal boron nitride (h-BN) nanocomposites [RF-(ACA)n-RF/h-BN] were prepared by reaction of the corresponding oligomer with h-BN nanoparticles (mean diame...Fluoroalkyl end-capped acrylic acid oligomer [RF-(ACA)n-RF]/hexagonal boron nitride (h-BN) nanocomposites [RF-(ACA)n-RF/h-BN] were prepared by reaction of the corresponding oligomer with h-BN nanoparticles (mean diameter: 50 nm) under non-catalytic or alkaline conditions, respectively. Fluoroalkyl end-capped N,N-dimethylacrylamide oligomer/h-BN nanocomposites [RF-(DMAA)n-RF/h-BN] were also obtained under similar conditions. It was demonstrated that RF-(ACA)n-RF/h-BN nanocomposites, which were prepared under alkaline conditions, afforded a clear weight loss in proportion to the contents of the oligomer in the composites after calcination at 800°C;however, the non-catalytic conditions enabled the RF-(ACA)n-RF/h-BN nanocomposite to give no weight loss behavior corresponding to the contents of the oligomer even after calcination. In fact, it was demonstrated that the RF-(ACA)n-RF/h-BN nanocomposites possessing a clear weight loss property could afford the fluorescent peak around 370 nm related to h-BN in the composites;however, the same fluorescent intensity of this nanocomposite after calcination at 800°C as that of the original h-BN was observed, indicating that this nanocomposite could give a clear weigh loss behavior corresponding to the content of the oligomer during the calcination process. In contrast, the RF-(ACA)n-RF/h-BN nanocomposites possessing no weigh loss behavior were found to exhibit the similar fluorescent intensity before and even after calcination at 800°C, suggesting that the corresponding nanocomposites could provide no weight loss ability corresponding to the contents of the oligomer in the composites even after calcination. Similarly, RF-(DMAA)n-RF/h-BN nanocomposites, which were prepared under non-catalytic or alkaline conditions, were found to provide no weight loss corresponding to the contents of the oligomer even after calcination, respectively. These fluorinated h-BN nanocomposites were applied to the surface modification of PMMA [poly(methyl methacrylate)] to exhibit an oleophobic pr展开更多
Fluorinated oligomer gel is suitable to the electrolyte of dye sensitized solar cell. This article studied mainly in the scope of electric conductivity, including ionic liquid in the electrolyte. It was found that the...Fluorinated oligomer gel is suitable to the electrolyte of dye sensitized solar cell. This article studied mainly in the scope of electric conductivity, including ionic liquid in the electrolyte. It was found that the ratio of mixing with dimetyl sulfoxide and the concentration of LiI affect the conductivity. The behavior is different depending on the type of ionic liquid. Although the mixing ionic liquid enhances the conductivity, the short circuit current density of assembled solar cell with it was suppressed so much.展开更多
Fluorinated oligomer gel is suitable to the electrolyte of dye-sensitized solar cell for low cost production. In this article, addition of pyridine was investigated for the purpose of enhancing the short current densi...Fluorinated oligomer gel is suitable to the electrolyte of dye-sensitized solar cell for low cost production. In this article, addition of pyridine was investigated for the purpose of enhancing the short current density. Two kinds of ionic liquids were tested: imidazolium and pyrazolium systems. The two different stages of adding pyridine to the electrolyte were considered and the amount of pyridine was studied. It was found that the electrolyte including pyrazolium ionic liquids to which pyridine was added before the mixing with fluorinated oligomer showed the highest electric conductivity, short current density and open voltage. This resulted in the highest conversion efficiency of 4%. As the amount of pyridine increased, the fill factor and the open voltage were improved at first, and then the short current density increased. If the pyridine was added more, the short current density conversely decreased.展开更多
A series of UV-curable fluorinated polyurethane-acrylate（PUA） has been developed by incorporating octafluoropentyl alcohol into the segment of UV-curable polyurethane-acrylate to improve the thermal property and sur...A series of UV-curable fluorinated polyurethane-acrylate（PUA） has been developed by incorporating octafluoropentyl alcohol into the segment of UV-curable polyurethane-acrylate to improve the thermal property and surface property of the copolymer material. The structures of the synthesized polymers were characterized by Fourier transform infrared（FTIR） spectrometry. In order to find out the effect of incorporated fluorine on the UV-cured films, the properties of the UV-cured films were tested through contact angle, water absorption, and thermogravimetric analysis （TGA）. The fractured-surface morphologies of the UV-cured coatings were investigated by scanning electron microscopy（SEM）. With increasing the content of fluorine segments, the contact angle of the UV-cured films increased and the water absorption decreased, suggesting the fluorine segments migrated and formed a fluorine-covered surface to avoid water penetration. The observation of the fractured-surface morphology through SEM test showed that the fluori- nated UV-cured films gained rough fractured-surface compared with the pure UV-cured polyacrylate film, demonstrating the migrating of the fluorine segments. The TGA curves show that the fluorinated UV-cured films gained higher thermal degradation temperature than the virgin UV-cured polyacrylate film. And as increasing the fluorine content, the thermal degradation temperature increased. These phenomena could be reasonably explained by the enrichment of fluorinecontained segment on the surface of the film and the high thermal property due to fluorine atom.展开更多
1 Results Considerable interest has been devoted in recent years to block copolymers containing fluoroalkyl groups owing to exhibiting the low surface energy and the self-assembled polymeric aggregates resembling mice...1 Results Considerable interest has been devoted in recent years to block copolymers containing fluoroalkyl groups owing to exhibiting the low surface energy and the self-assembled polymeric aggregates resembling micelle in aqueous and organic media, which cannot be achieved in the corresponding randomly fluorinated copolymers[1].In these fluorinated block copolymers, we have found that ABA triblock-type fluoroalkylated oligomers and dendritic-type fluoroalkyl end-capped block copolymers can be prepared...展开更多
文摘We fabricated dye-sensitized solar cells including fluorinated gel electrolyte and studied about the relationship between the performance of the solar cells and the aggregation state of TiO2 nano-particles on electrodes. As for the performance of the cell, the I-V characteristics were measured under irradiation. The combination of TiO2 nanoparticles with different size plays an important role in bringing unevenness to realize a large surface area, which is critical for the high performance of the cells.
文摘Fluoroalkyl end-capped acrylic acid oligomer [RF-(ACA)n-RF]/hexagonal boron nitride (h-BN) nanocomposites [RF-(ACA)n-RF/h-BN] were prepared by reaction of the corresponding oligomer with h-BN nanoparticles (mean diameter: 50 nm) under non-catalytic or alkaline conditions, respectively. Fluoroalkyl end-capped N,N-dimethylacrylamide oligomer/h-BN nanocomposites [RF-(DMAA)n-RF/h-BN] were also obtained under similar conditions. It was demonstrated that RF-(ACA)n-RF/h-BN nanocomposites, which were prepared under alkaline conditions, afforded a clear weight loss in proportion to the contents of the oligomer in the composites after calcination at 800°C;however, the non-catalytic conditions enabled the RF-(ACA)n-RF/h-BN nanocomposite to give no weight loss behavior corresponding to the contents of the oligomer even after calcination. In fact, it was demonstrated that the RF-(ACA)n-RF/h-BN nanocomposites possessing a clear weight loss property could afford the fluorescent peak around 370 nm related to h-BN in the composites;however, the same fluorescent intensity of this nanocomposite after calcination at 800°C as that of the original h-BN was observed, indicating that this nanocomposite could give a clear weigh loss behavior corresponding to the content of the oligomer during the calcination process. In contrast, the RF-(ACA)n-RF/h-BN nanocomposites possessing no weigh loss behavior were found to exhibit the similar fluorescent intensity before and even after calcination at 800°C, suggesting that the corresponding nanocomposites could provide no weight loss ability corresponding to the contents of the oligomer in the composites even after calcination. Similarly, RF-(DMAA)n-RF/h-BN nanocomposites, which were prepared under non-catalytic or alkaline conditions, were found to provide no weight loss corresponding to the contents of the oligomer even after calcination, respectively. These fluorinated h-BN nanocomposites were applied to the surface modification of PMMA [poly(methyl methacrylate)] to exhibit an oleophobic pr
文摘Fluorinated oligomer gel is suitable to the electrolyte of dye sensitized solar cell. This article studied mainly in the scope of electric conductivity, including ionic liquid in the electrolyte. It was found that the ratio of mixing with dimetyl sulfoxide and the concentration of LiI affect the conductivity. The behavior is different depending on the type of ionic liquid. Although the mixing ionic liquid enhances the conductivity, the short circuit current density of assembled solar cell with it was suppressed so much.
文摘Fluorinated oligomer gel is suitable to the electrolyte of dye-sensitized solar cell for low cost production. In this article, addition of pyridine was investigated for the purpose of enhancing the short current density. Two kinds of ionic liquids were tested: imidazolium and pyrazolium systems. The two different stages of adding pyridine to the electrolyte were considered and the amount of pyridine was studied. It was found that the electrolyte including pyrazolium ionic liquids to which pyridine was added before the mixing with fluorinated oligomer showed the highest electric conductivity, short current density and open voltage. This resulted in the highest conversion efficiency of 4%. As the amount of pyridine increased, the fill factor and the open voltage were improved at first, and then the short current density increased. If the pyridine was added more, the short current density conversely decreased.
基金Supported by the the Science and Technology Program of Guangzhou City, China（No.2014J4100215）, the Natural Science Foundation of Guangdong Province, China（No.S2013010012106） and the Project of the Key Laboratory of Cellulose and Lignocellulosics, Guangzhou Institute of Chemistry, Chinese Academy of Sciences.
文摘A series of UV-curable fluorinated polyurethane-acrylate（PUA） has been developed by incorporating octafluoropentyl alcohol into the segment of UV-curable polyurethane-acrylate to improve the thermal property and surface property of the copolymer material. The structures of the synthesized polymers were characterized by Fourier transform infrared（FTIR） spectrometry. In order to find out the effect of incorporated fluorine on the UV-cured films, the properties of the UV-cured films were tested through contact angle, water absorption, and thermogravimetric analysis （TGA）. The fractured-surface morphologies of the UV-cured coatings were investigated by scanning electron microscopy（SEM）. With increasing the content of fluorine segments, the contact angle of the UV-cured films increased and the water absorption decreased, suggesting the fluorine segments migrated and formed a fluorine-covered surface to avoid water penetration. The observation of the fractured-surface morphology through SEM test showed that the fluori- nated UV-cured films gained rough fractured-surface compared with the pure UV-cured polyacrylate film, demonstrating the migrating of the fluorine segments. The TGA curves show that the fluorinated UV-cured films gained higher thermal degradation temperature than the virgin UV-cured polyacrylate film. And as increasing the fluorine content, the thermal degradation temperature increased. These phenomena could be reasonably explained by the enrichment of fluorinecontained segment on the surface of the film and the high thermal property due to fluorine atom.
文摘1 Results Considerable interest has been devoted in recent years to block copolymers containing fluoroalkyl groups owing to exhibiting the low surface energy and the self-assembled polymeric aggregates resembling micelle in aqueous and organic media, which cannot be achieved in the corresponding randomly fluorinated copolymers[1].In these fluorinated block copolymers, we have found that ABA triblock-type fluoroalkylated oligomers and dendritic-type fluoroalkyl end-capped block copolymers can be prepared...
