Dielectric ceramic capacitors,with the advantages of high power density,fast chargedischarge capability,excellent fatigue endurance,and good high temperature stability,have been acknowledged to be promising candidates...Dielectric ceramic capacitors,with the advantages of high power density,fast chargedischarge capability,excellent fatigue endurance,and good high temperature stability,have been acknowledged to be promising candidates for solid-state pulse power systems.This review investigates the energy storage performances of linear dielectric,relaxor ferroelectric,and antiferroelectric from the viewpoint of chemical modification,macro/microstructural design,and electrical property optimization.Research progress of ceramic bulks and films for Pb-based and/or Pb-free systems is summarized.Finally,we propose the perspectives on the development of energy storage ceramics for pulse power capacitors in the future.展开更多
We demonstrate an angle-tuned signal-resonated optical parametric oscillator (OPO) with periodically poled lithium niobate (PPLN) pumped by a diode-pumped Nd:YVO4 laser. 1499.8 - 1506.6 nm of signal wavelength is achi...We demonstrate an angle-tuned signal-resonated optical parametric oscillator (OPO) with periodically poled lithium niobate (PPLN) pumped by a diode-pumped Nd:YVO4 laser. 1499.8 - 1506.6 nm of signal wavelength is achieved at 140℃ by rotating a 29-μm period PPLN from 0° - 10.22° in the x-y plane while keeping the pump wave vertical to the resonator mirrors. Two pairs of the signal and idler waves of the same wavelengths can be achieved symmetrically for each pair of angles of rotation with same absolute value and opposite sign. Theoretical analyses on angle-tuned PPLN-OPO with pump wave vertical to the resonator mirrors are presented and in good agreement with our experimental results. It is also found that all interacting waves in the cavity (not inside the crystal) are always collineax for PPLN-OPO with the pump wave vertical to the resonator mirrors while phase-matching is noncollinear within the crystal.展开更多
Most widely used piezoelectric ceramics are based on Pb(Zr,Ti)O3(PZT)composition which has adverse environmental and health effects due to its high lead content.Environmental and safety concerns with respect to the ut...Most widely used piezoelectric ceramics are based on Pb(Zr,Ti)O3(PZT)composition which has adverse environmental and health effects due to its high lead content.Environmental and safety concerns with respect to the utilization,recycling,and disposal of lead-based piezoelectric ceramics have induced a new surge in developing lead-free piezoelectric ceramics.Among all the lead-free ceramics,(K,Na)NbO3(KNN)has drawn increasing attention because of its well-balanced piezoelectric properties and better environmental compatibility.On basis of the author’s work,this review summarizes the progress that has been made in recent years on development of KNN-based piezoelectric ceramics,including crystallographic structure and phase transition analysis,pressurized solid-state sintering as well as liquid-phase-assisted sintering process,and poling treatment for property enhancement.All in all,KNN is a promising lead-free system,but more research is still required both from academic and industrial interests.展开更多
Relaxor ferroelectric single crystals PMNT with the size of φ40 mm×80 mm have been grown by a modified Bridgman method and their ferroelectric and piezoelectric properties have been characterized. The properties...Relaxor ferroelectric single crystals PMNT with the size of φ40 mm×80 mm have been grown by a modified Bridgman method and their ferroelectric and piezoelectric properties have been characterized. The properties varied with the compositions and cut types. On the (001) cut, PMNT76/24 single crystals exhibited a dielectric constant ε of about 3 400, a dielectric loss of tanδ 【0.7%, a piezoelectric constant d33 of 980 pC/N, an electromechanical coupling factor kt of 0.55 and Tc of about 110℃. whereas the properties of PMNT67/33 single crystals on (001) cut were betler: e of about 5 300, tan5 【0.6%, d33 up to 3 000 pC/N, kt 0.64, K33 0.93 and Tc of about 150℃. The piezoelectric properties on other cuts such as (110) and (111) were much lower than those on the (001) cut. The rhombohedral PMNT crystals grown by this method showed more excellent piezoelectric properties than those grown by high temperature solution method and higher value of kt than the rhombohedral PZNT single crystals. it has also展开更多
Macrophage-mediated inflammation compromises bone repair in diabetic patients.Electrical signaling cues are known to regulate macrophage functions.However,the biological effects of electrical microenvironment from cha...Macrophage-mediated inflammation compromises bone repair in diabetic patients.Electrical signaling cues are known to regulate macrophage functions.However,the biological effects of electrical microenvironment from charged biomaterials on the immune response for regulating osteogenesis under diabetic conditions remain to be elucidated.Herein the endogeneous electrical microenvironment of native bone tissue was recapitulated by fabricating a ferroelectric BaTiO_(3)/poly(vinylidene fluoridetrifluoroethylene)(BTO/P(VDF-TrFE))nanocomposite membrane.In vitro,the polarized BaTiO_(3)/poly(vinylidene fluoridetrifluoroethylene)(BTO/P(VDF-TrFE))nanocomposite membranes inhibited high glucose-induced M1-type inflammation,by effecting changes in cell morphology,M1 marker expression and pro-inflammatory cytokine secretion in macrophages.This led to enhanced osteogenic differentiation of human bone marrow mesenchymal stem cells(BM-MSCs).In vivo,the biomimetic electrical microenvironment recapitulated by the polarized nanocomposite membranes switched macrophage phenotype from the pro-inflammatory(M1)into the pro-healing(M2)phenotype,which in turn enhanced bone regeneration in rats with type 2 diabetes mellitus.Mechanistic studies revealed that the biomimetic electrical microenvironment attenuated pro-inflammatory M1 macrophage polarization under hyperglycemic conditions by suppressing expression of AKT2 and IRF5 within the PI3K-AKT signaling pathway,thereby inducing favorable osteo-immunomodulatory effects.Our study thus provides fundamental insights into the biological effects of restoring the electrical microenvironment conducive for osteogenesis under DM conditions,and offers an effective strategy to design functionalized biomaterials for bone regeneration therapy in diabetic patients.展开更多
BaTiO3 films were prepared by microarc oxidation (MAO) with an in-house built alternating current (AC) power supply in Ba(OH)2 solution in this study. The surface morphology, combinability with the substrate and phase...BaTiO3 films were prepared by microarc oxidation (MAO) with an in-house built alternating current (AC) power supply in Ba(OH)2 solution in this study. The surface morphology, combinability with the substrate and phase composition of the films were investigated by XRD, SEM and TEM. The BaTiO3 films were annealed at a temperature range of 900 to 1200℃ and phase compositions were tested thereafter. The results showed that the BaTiO3 films were mainly composed of the primitive hexagonal phase with relatively small amount of tetragonal and amorphous phases. Moreover, the amount of amorphous phase decreased with the time of annealing. The transformation of BaTiO3 from hexagonal structure to tetragonal stucture became obvious until the annealing temperature reached 1200℃. The film consisted mainly of BaTiO3 tetragonal structure with ferroelectric property. The influence of annealing on surface morphology and mechanism of phase transformation of the films were also discussed.展开更多
基金supported by the National Natural Science Foundation of China(51767010).
文摘Dielectric ceramic capacitors,with the advantages of high power density,fast chargedischarge capability,excellent fatigue endurance,and good high temperature stability,have been acknowledged to be promising candidates for solid-state pulse power systems.This review investigates the energy storage performances of linear dielectric,relaxor ferroelectric,and antiferroelectric from the viewpoint of chemical modification,macro/microstructural design,and electrical property optimization.Research progress of ceramic bulks and films for Pb-based and/or Pb-free systems is summarized.Finally,we propose the perspectives on the development of energy storage ceramics for pulse power capacitors in the future.
基金This work was supported by the National Natural Science Foundation of China (60278001)the Outstanding Doctorate Dissertation Foundation of Tianjin University [2001]01the Science & Technology Cooperation Foundation of Nankai University and Tianjin
文摘We demonstrate an angle-tuned signal-resonated optical parametric oscillator (OPO) with periodically poled lithium niobate (PPLN) pumped by a diode-pumped Nd:YVO4 laser. 1499.8 - 1506.6 nm of signal wavelength is achieved at 140℃ by rotating a 29-μm period PPLN from 0° - 10.22° in the x-y plane while keeping the pump wave vertical to the resonator mirrors. Two pairs of the signal and idler waves of the same wavelengths can be achieved symmetrically for each pair of angles of rotation with same absolute value and opposite sign. Theoretical analyses on angle-tuned PPLN-OPO with pump wave vertical to the resonator mirrors are presented and in good agreement with our experimental results. It is also found that all interacting waves in the cavity (not inside the crystal) are always collineax for PPLN-OPO with the pump wave vertical to the resonator mirrors while phase-matching is noncollinear within the crystal.
基金Tsinghua University Initiative Scientific Research Program and National Nature Science Foundation of China(Grant Nos.50921061 and 51028202).
文摘Most widely used piezoelectric ceramics are based on Pb(Zr,Ti)O3(PZT)composition which has adverse environmental and health effects due to its high lead content.Environmental and safety concerns with respect to the utilization,recycling,and disposal of lead-based piezoelectric ceramics have induced a new surge in developing lead-free piezoelectric ceramics.Among all the lead-free ceramics,(K,Na)NbO3(KNN)has drawn increasing attention because of its well-balanced piezoelectric properties and better environmental compatibility.On basis of the author’s work,this review summarizes the progress that has been made in recent years on development of KNN-based piezoelectric ceramics,including crystallographic structure and phase transition analysis,pressurized solid-state sintering as well as liquid-phase-assisted sintering process,and poling treatment for property enhancement.All in all,KNN is a promising lead-free system,but more research is still required both from academic and industrial interests.
文摘Relaxor ferroelectric single crystals PMNT with the size of φ40 mm×80 mm have been grown by a modified Bridgman method and their ferroelectric and piezoelectric properties have been characterized. The properties varied with the compositions and cut types. On the (001) cut, PMNT76/24 single crystals exhibited a dielectric constant ε of about 3 400, a dielectric loss of tanδ 【0.7%, a piezoelectric constant d33 of 980 pC/N, an electromechanical coupling factor kt of 0.55 and Tc of about 110℃. whereas the properties of PMNT67/33 single crystals on (001) cut were betler: e of about 5 300, tan5 【0.6%, d33 up to 3 000 pC/N, kt 0.64, K33 0.93 and Tc of about 150℃. The piezoelectric properties on other cuts such as (110) and (111) were much lower than those on the (001) cut. The rhombohedral PMNT crystals grown by this method showed more excellent piezoelectric properties than those grown by high temperature solution method and higher value of kt than the rhombohedral PZNT single crystals. it has also
基金This work was supported by the National Key R&D Program of China(2018YFC1105303/04)National Natural Science Foundation of China(Nos.51772006,31670993,51973004,81991505,82022016)+3 种基金Beijing Municipal Science&Technology Commission Projects(Z181100002018001)Peking University Medicine Fund(Nos.PKU2020LCXQ009,BMU2020PYB029)Natural Science Foundation of Hunan Province(2019JJ50779)Health and Family Planning Commission of Hunan Province(20180246).
文摘Macrophage-mediated inflammation compromises bone repair in diabetic patients.Electrical signaling cues are known to regulate macrophage functions.However,the biological effects of electrical microenvironment from charged biomaterials on the immune response for regulating osteogenesis under diabetic conditions remain to be elucidated.Herein the endogeneous electrical microenvironment of native bone tissue was recapitulated by fabricating a ferroelectric BaTiO_(3)/poly(vinylidene fluoridetrifluoroethylene)(BTO/P(VDF-TrFE))nanocomposite membrane.In vitro,the polarized BaTiO_(3)/poly(vinylidene fluoridetrifluoroethylene)(BTO/P(VDF-TrFE))nanocomposite membranes inhibited high glucose-induced M1-type inflammation,by effecting changes in cell morphology,M1 marker expression and pro-inflammatory cytokine secretion in macrophages.This led to enhanced osteogenic differentiation of human bone marrow mesenchymal stem cells(BM-MSCs).In vivo,the biomimetic electrical microenvironment recapitulated by the polarized nanocomposite membranes switched macrophage phenotype from the pro-inflammatory(M1)into the pro-healing(M2)phenotype,which in turn enhanced bone regeneration in rats with type 2 diabetes mellitus.Mechanistic studies revealed that the biomimetic electrical microenvironment attenuated pro-inflammatory M1 macrophage polarization under hyperglycemic conditions by suppressing expression of AKT2 and IRF5 within the PI3K-AKT signaling pathway,thereby inducing favorable osteo-immunomodulatory effects.Our study thus provides fundamental insights into the biological effects of restoring the electrical microenvironment conducive for osteogenesis under DM conditions,and offers an effective strategy to design functionalized biomaterials for bone regeneration therapy in diabetic patients.
基金Supported by Guangdong Natural Science Foundation (Grant No. 0500649)
文摘BaTiO3 films were prepared by microarc oxidation (MAO) with an in-house built alternating current (AC) power supply in Ba(OH)2 solution in this study. The surface morphology, combinability with the substrate and phase composition of the films were investigated by XRD, SEM and TEM. The BaTiO3 films were annealed at a temperature range of 900 to 1200℃ and phase compositions were tested thereafter. The results showed that the BaTiO3 films were mainly composed of the primitive hexagonal phase with relatively small amount of tetragonal and amorphous phases. Moreover, the amount of amorphous phase decreased with the time of annealing. The transformation of BaTiO3 from hexagonal structure to tetragonal stucture became obvious until the annealing temperature reached 1200℃. The film consisted mainly of BaTiO3 tetragonal structure with ferroelectric property. The influence of annealing on surface morphology and mechanism of phase transformation of the films were also discussed.
