Good linearity and wide dynamic range are the advantages of asymmetric Fabry-Pérot （F-P） interferometric cavity, whose realization has been long for. Based on optical thin film characteristic matrix theory, an ...Good linearity and wide dynamic range are the advantages of asymmetric Fabry-Pérot （F-P） interferometric cavity, whose realization has been long for. Based on optical thin film characteristic matrix theory, an asymmetric F-P interferometric cavity with good linearity and wide dynamic range is designed. And by choosing the material of two different thin metallic layers, the asymmetric F-P interferometric cavity is successfully fabricated. The design theory and method of this asymmetric F-P interferometric cavity have been described in detailed. In this paper an asymmetric F-P interferometric cavity used in fiber optical sensor is reported.展开更多
By using a graded-index multimode fiber （GI-MMF） with a relatively flat index profile and high refractive index of the fiber core, a microextrinsic fiber-optic Fabry Prot interferometric （MEFPI） strain sensor is f...By using a graded-index multimode fiber （GI-MMF） with a relatively flat index profile and high refractive index of the fiber core, a microextrinsic fiber-optic Fabry Prot interferometric （MEFPI） strain sensor is fabricated through chemical etching and fusion splicing. Higher reflectance of the microcavity is obtained due to the less-curved inner wall in the center of the fiber core after etching and higher index contrast between the GI-MMF core and air. The maximum reflection of the sensor is enhanced 12 dB than that obtained by etching of the Er- or B-doped fibers. High fringe contrast of 22 dB is obtained. The strain and temperature responses of the MEFPI sensors are investigated in this experiment. Good linearity and high sensitivity are achieved, with wavelength-strain and wavelength-temperature sensitivities of 7.82 pm/με and 5.01 pm/°C, respectively.展开更多
A novel gain measurement technique based on the integration of the measured amplified spontaneous emission spectrum multiplying a phase function over one longitudinal mode interval is proposed for Fabry-Perot semicond...A novel gain measurement technique based on the integration of the measured amplified spontaneous emission spectrum multiplying a phase function over one longitudinal mode interval is proposed for Fabry-Perot semiconductor lasers.展开更多
A novel long wavelength photodetector with dual-wavelength spectral response is designed and fabricated using a step-shaped Fabry-Perot （F-P） filter structure. The step-shaped GaAs/A1GaAs distributed Bragg reflector...A novel long wavelength photodetector with dual-wavelength spectral response is designed and fabricated using a step-shaped Fabry-Perot （F-P） filter structure. The step-shaped GaAs/A1GaAs distributed Bragg reflectors and the InP PIN photodetector are grown on a GaAs substrate using low pressure metal organic chemical vapor deposition. High quality GaAs/InP heteroepitaxy is realized by employing a thin low temperature buffer layer. The photodetector structure is optimized by theoretical simulation. This device has a dual-peak distance of 19 nm （1558 and 1 577 nm）. The 3-dB bandwidth of 16 GHz is simultaneously obtained with peak ouantum efficiencies of 8.5% and 8.6% around 1 .55R and 1 .577 nm respectively展开更多
理论上推导了光纤法布里-珀罗复合结构传感器的反射光谱条纹对比度与外界介质折射率的关系,并分析了实验参数对传感器灵敏度的影响.利用化学腐蚀渐变折射率多模光纤制作了光纤法布里-珀罗复合结构折射率传感器,空气中的条纹对比度可达3...理论上推导了光纤法布里-珀罗复合结构传感器的反射光谱条纹对比度与外界介质折射率的关系,并分析了实验参数对传感器灵敏度的影响.利用化学腐蚀渐变折射率多模光纤制作了光纤法布里-珀罗复合结构折射率传感器,空气中的条纹对比度可达30dB以上,折射率测量的灵敏度达45dB/RIU(refraction index unit,简RIU)以上.实验结果与理论符合很好.通过理论和实验分析,提出了进一步提高传感器灵敏度的方法.展开更多
基金This work was supported by the National "863" Project of China (No. 2003AA311022)the National "973" Project of China (No. 2004CB719804)the National Natural Science Foundation of China (No. 10274108)the Natural Science Foundation of Guangdong Province of China.
文摘Good linearity and wide dynamic range are the advantages of asymmetric Fabry-Pérot （F-P） interferometric cavity, whose realization has been long for. Based on optical thin film characteristic matrix theory, an asymmetric F-P interferometric cavity with good linearity and wide dynamic range is designed. And by choosing the material of two different thin metallic layers, the asymmetric F-P interferometric cavity is successfully fabricated. The design theory and method of this asymmetric F-P interferometric cavity have been described in detailed. In this paper an asymmetric F-P interferometric cavity used in fiber optical sensor is reported.
基金supported by the State Key Laboratory of Advanced Optical Communication Systems and Networks,China
文摘By using a graded-index multimode fiber （GI-MMF） with a relatively flat index profile and high refractive index of the fiber core, a microextrinsic fiber-optic Fabry Prot interferometric （MEFPI） strain sensor is fabricated through chemical etching and fusion splicing. Higher reflectance of the microcavity is obtained due to the less-curved inner wall in the center of the fiber core after etching and higher index contrast between the GI-MMF core and air. The maximum reflection of the sensor is enhanced 12 dB than that obtained by etching of the Er- or B-doped fibers. High fringe contrast of 22 dB is obtained. The strain and temperature responses of the MEFPI sensors are investigated in this experiment. Good linearity and high sensitivity are achieved, with wavelength-strain and wavelength-temperature sensitivities of 7.82 pm/με and 5.01 pm/°C, respectively.
基金This work was supported by the National Nature Science Foundation of China under grants No. 60225011major state basic research program under grant No. G2000036606.
文摘A novel gain measurement technique based on the integration of the measured amplified spontaneous emission spectrum multiplying a phase function over one longitudinal mode interval is proposed for Fabry-Perot semiconductor lasers.
基金supported by the National"973"Pro-gram of China(No.2010CB327600)the National Natural Science Foundation of China(No.61020106007)+3 种基金the Fundamental Research Funds for the Central University(No.BUPT2011RC0403)the National"863"Program of China(No.2007AA03Z418)the 111 Project of China(No.B07005)the Program for Changjiang Scholars and Innovative Research Team in University MOE,China(No.IRT0609)
文摘A novel long wavelength photodetector with dual-wavelength spectral response is designed and fabricated using a step-shaped Fabry-Perot （F-P） filter structure. The step-shaped GaAs/A1GaAs distributed Bragg reflectors and the InP PIN photodetector are grown on a GaAs substrate using low pressure metal organic chemical vapor deposition. High quality GaAs/InP heteroepitaxy is realized by employing a thin low temperature buffer layer. The photodetector structure is optimized by theoretical simulation. This device has a dual-peak distance of 19 nm （1558 and 1 577 nm）. The 3-dB bandwidth of 16 GHz is simultaneously obtained with peak ouantum efficiencies of 8.5% and 8.6% around 1 .55R and 1 .577 nm respectively
文摘理论上推导了光纤法布里-珀罗复合结构传感器的反射光谱条纹对比度与外界介质折射率的关系,并分析了实验参数对传感器灵敏度的影响.利用化学腐蚀渐变折射率多模光纤制作了光纤法布里-珀罗复合结构折射率传感器,空气中的条纹对比度可达30dB以上,折射率测量的灵敏度达45dB/RIU(refraction index unit,简RIU)以上.实验结果与理论符合很好.通过理论和实验分析,提出了进一步提高传感器灵敏度的方法.
