On the basis of the nearfield acoustic holography (NAH) based on the distributed source boundary point method (DSBPM), a novel NAH based on the equivalent source method (ESM) is proposed. The theoretical model of the ...On the basis of the nearfield acoustic holography (NAH) based on the distributed source boundary point method (DSBPM), a novel NAH based on the equivalent source method (ESM) is proposed. The theoretical model of the proposed method is established at first. And then, the error sensitivity and the reconstruction problems of a multi-source acoustic field and a semi-free acoustic field are analyzed, and the corresponding treatment methods are proposed. Subsequently, an experiment on a speaker is investigated to validate the feasibility and correctness of the method. In the method, no discretization is needed on the boundary of the vibrating body. The acoustic field is predicted directly by a set of weighted equivalent sources located inside the vibrating body. Therefore, the variable interpolation, the treatments of singular integrals and non-uniqueness of solutions in the characteristic wave number are avoided. Additionally, the method is adapted to arbitrary-shaped source, so it is really a meshless method. Furthermore, there are such merits as the simple principle, the high calculation efficiency and precision. It is valuabe for the NAH to be applied in the practical engineering field.展开更多
An equivalent source-load MTDC system including DC voltage control units,power control units and interconnected DC lines is considered in this paper,which can be regarded as a generic structure of low-voltage DC micro...An equivalent source-load MTDC system including DC voltage control units,power control units and interconnected DC lines is considered in this paper,which can be regarded as a generic structure of low-voltage DC microgrids,mediumvoltage DC distribution systems or HVDC transmission systems with a common DC bus.A reduced-order model is proposed with a circuit structure of a resistor,inductor and capacitor in parallel for dynamic stability analysis of the system in DC voltage control timescale.The relationship between control parameters and physical parameters of the equivalent circuit can be found,which provides an intuitive insight into the physical meaning of control parameters.Employing this model,a second-order characteristic equation is further derived to investigate system dynamic stability mechanisms in an analytical approach.As a result,the system oscillation frequency and damping are characterized in a straight forward manner,and the role of electrical and control parameters and different system-level control strategies in system dynamic stability in DC voltage control timescale is defined.The effectiveness of the proposed reduced-order model and the correctness of the theoretical analysis are verified by simulation based on PSCAD/EMTDC and an experiment based on a hardware low-voltage MTDC system platform.展开更多
The equivalent impedance parameters of loads have been widely used to identify and locate the harmonic sources.However,the existing calculation methods suffer from outliers caused by the zero-crossing of the denominat...The equivalent impedance parameters of loads have been widely used to identify and locate the harmonic sources.However,the existing calculation methods suffer from outliers caused by the zero-crossing of the denominator.These outliers can result in inaccuracy and unreliability of harmonic source location.To address this issue,this paper proposes an innovative method of equivalent impedance parameter calculation of three-phase symmetrical loads that avoid outliers.The correctness and effectiveness of the proposed method are verified by simulations on Simulink using actual monitoring data.The results show that the proposed method is not only simple and easy to implement but also highly accurate.展开更多
Point Sources and Gaussian beams are used frequently as fundamental building blocks for developing ultrasonic beam models. Both these models have different weaknesses that limit their effectiveness. Here, we will show...Point Sources and Gaussian beams are used frequently as fundamental building blocks for developing ultrasonic beam models. Both these models have different weaknesses that limit their effectiveness. Here, we will show that one can develop a Gaussian Beam Equivalent Point Source （GBEPS） model that removes those weaknesses and combines the accuracy and versatility of the point source models with much of the speed and well-behaved nature of Gaussian beam models. We will demonstrate the efficiency and versatility of this new GBEPS model in simulating the beams generated from ultrasonic phased arrays, using as few as one Gaussian beam per element of the array. A single element GBEPS model will be shown to be as accurate as a point source model even when substantial beam focusing or steering is present in the array or where the array beam is transmitted through an interface. At the same time the GBEPS model will be shown to be several orders of magnitude faster than the point source model.展开更多
基金This work was supported by the National Natural Science Foundation of China(Grant No.50275044)the Research Fund for theDoctoral Program of Higher Education(Grant No.20020359005).
文摘On the basis of the nearfield acoustic holography (NAH) based on the distributed source boundary point method (DSBPM), a novel NAH based on the equivalent source method (ESM) is proposed. The theoretical model of the proposed method is established at first. And then, the error sensitivity and the reconstruction problems of a multi-source acoustic field and a semi-free acoustic field are analyzed, and the corresponding treatment methods are proposed. Subsequently, an experiment on a speaker is investigated to validate the feasibility and correctness of the method. In the method, no discretization is needed on the boundary of the vibrating body. The acoustic field is predicted directly by a set of weighted equivalent sources located inside the vibrating body. Therefore, the variable interpolation, the treatments of singular integrals and non-uniqueness of solutions in the characteristic wave number are avoided. Additionally, the method is adapted to arbitrary-shaped source, so it is really a meshless method. Furthermore, there are such merits as the simple principle, the high calculation efficiency and precision. It is valuabe for the NAH to be applied in the practical engineering field.
基金This work was supported in part by the National Natural Science Foundation of China under Grant No.51977142.
文摘An equivalent source-load MTDC system including DC voltage control units,power control units and interconnected DC lines is considered in this paper,which can be regarded as a generic structure of low-voltage DC microgrids,mediumvoltage DC distribution systems or HVDC transmission systems with a common DC bus.A reduced-order model is proposed with a circuit structure of a resistor,inductor and capacitor in parallel for dynamic stability analysis of the system in DC voltage control timescale.The relationship between control parameters and physical parameters of the equivalent circuit can be found,which provides an intuitive insight into the physical meaning of control parameters.Employing this model,a second-order characteristic equation is further derived to investigate system dynamic stability mechanisms in an analytical approach.As a result,the system oscillation frequency and damping are characterized in a straight forward manner,and the role of electrical and control parameters and different system-level control strategies in system dynamic stability in DC voltage control timescale is defined.The effectiveness of the proposed reduced-order model and the correctness of the theoretical analysis are verified by simulation based on PSCAD/EMTDC and an experiment based on a hardware low-voltage MTDC system platform.
基金supported by the National Natural Science Foundation of China(No.51777035).
文摘The equivalent impedance parameters of loads have been widely used to identify and locate the harmonic sources.However,the existing calculation methods suffer from outliers caused by the zero-crossing of the denominator.These outliers can result in inaccuracy and unreliability of harmonic source location.To address this issue,this paper proposes an innovative method of equivalent impedance parameter calculation of three-phase symmetrical loads that avoid outliers.The correctness and effectiveness of the proposed method are verified by simulations on Simulink using actual monitoring data.The results show that the proposed method is not only simple and easy to implement but also highly accurate.
基金supported by the National Science Foundation Industry/University Cooperative Research Center program at Iowa State Universitythe Natural Sciences and Engineering Research Council of Canadaby the National Natural Science Foundation of China(NSFC)
文摘Point Sources and Gaussian beams are used frequently as fundamental building blocks for developing ultrasonic beam models. Both these models have different weaknesses that limit their effectiveness. Here, we will show that one can develop a Gaussian Beam Equivalent Point Source （GBEPS） model that removes those weaknesses and combines the accuracy and versatility of the point source models with much of the speed and well-behaved nature of Gaussian beam models. We will demonstrate the efficiency and versatility of this new GBEPS model in simulating the beams generated from ultrasonic phased arrays, using as few as one Gaussian beam per element of the array. A single element GBEPS model will be shown to be as accurate as a point source model even when substantial beam focusing or steering is present in the array or where the array beam is transmitted through an interface. At the same time the GBEPS model will be shown to be several orders of magnitude faster than the point source model.
