Among different sources of alternate energy,wind and solar are two prominent and promising alternatives to meet the future electricity needs for mankind.Generally,these sources are integrated at the distribution utili...Among different sources of alternate energy,wind and solar are two prominent and promising alternatives to meet the future electricity needs for mankind.Generally,these sources are integrated at the distribution utilities to supply the local distribution customers.If the power generated by these sources is bulk,then they are either integrated at the distribution/transmission level or may be operated in an island mode if feasible.The integration of these renewables in the power network will change the fault level and network topologies.These fault levels are intermittent in nature and existing protection schemes may fail to operate because of their pre-set condition.Therefore,the design and selection of a proper protection scheme is very much essential for reliable control and operation of renewable integrated power systems.Depending upon the level of infeed and location of the renewable integration,the protection requirements are different.For low renewable infeed at the distribution level,the existing relay settings are immune from any small change in the network fault current from new incoming renewables.However,bulk renewable infeed requires modification in the existing protection schemes to accommodate the fault current variation from the incoming renewables.For bulk penetration of the renewable,the requirement of modified/additional protection schemes is unavoidable.Adaptive relaying and non-adaptive relaying schemes are discussed in the literature for protection of power networks,which are experiencing dynamic fault currents and frequent changing network topologies.This article presents a detailed review of protection schemes for renewable integrated power networks which includes distribution,transmission and microgrid systems.The merits and demerits of these protection schemes are also identified in this article for the added interest of the readers.The visible scope of advance protection schemes which may be suitable for providing reliable protection for dynamic fault current networks is also explored.展开更多
Wind power, solar power and water power are technologies that can be used as the main sources of renewable energy so that the target of decarbonisation in the energy sector can be achieved. However, when compared with...Wind power, solar power and water power are technologies that can be used as the main sources of renewable energy so that the target of decarbonisation in the energy sector can be achieved. However, when compared with conventional power plants, they have a significant difference. The share of renewable energy has made a difference and posed various challenges, especially in the power generation system. The reliability of the power system can achieve the decarbonization target but this objective often collides with several challenges and failures, such that they make achievement of the target very vulnerable, Even so, the challenges and technological solutions are still very rarely discussed in the literature. This study carried out specific investigations on various technological solutions and challenges, especially in the power system domain. The results of the review of the solution matrix and the interrelated technological challenges are the most important parts to be developed in the future. Developing a matrix with various renewable technology solutions can help solve RE challenges. The potential of the developed technological solutions is expected to be able to help and prioritize them especially cost-effective energy. In addition, technology solutions that are identified in groups can help reduce certain challenges. The categories developed in this study are used to assist in determining the specific needs and increasing transparency of the renewable energy integration process in the future.展开更多
Based on the statistical analysis of emission inventory and ISCST3 model simulation, the emission and ambient concentration contributions of energy-use related sources to the major pollutants of SO2, NOx and PM10 in u...Based on the statistical analysis of emission inventory and ISCST3 model simulation, the emission and ambient concentration contributions of energy-use related sources to the major pollutants of SO2, NOx and PM10 in urban areas of Beijing were analyzed. The SO2 emission contributions of coal burning in power plants, industrial and heating sectors were 49%, 26% and 24% respectively. The vehicle exhaust contributed 74% of the NOx concentration. As to PM10, the industrial sector was the largest emission (28%) and concentration (21%) contributor despite of the fugitive sources. The source emission contributions of VOC and NH3, which greatly influence the generation of secondary pollutants, were discussed as well. This paper also analyzed the control strategies of energy consumption and vehicle sources, based on which the control scenario in 2008 was established and the change of emission and concentration contribution were estimated. The results show that the cleaner energy use, industrial structure improvement, transportation mode modification and single vehicle emission control will greatly improve air quality. The industrial sector will change to the largest contributor of SO2 and as to NOx, vehicle emission control is still important.展开更多
文摘Among different sources of alternate energy,wind and solar are two prominent and promising alternatives to meet the future electricity needs for mankind.Generally,these sources are integrated at the distribution utilities to supply the local distribution customers.If the power generated by these sources is bulk,then they are either integrated at the distribution/transmission level or may be operated in an island mode if feasible.The integration of these renewables in the power network will change the fault level and network topologies.These fault levels are intermittent in nature and existing protection schemes may fail to operate because of their pre-set condition.Therefore,the design and selection of a proper protection scheme is very much essential for reliable control and operation of renewable integrated power systems.Depending upon the level of infeed and location of the renewable integration,the protection requirements are different.For low renewable infeed at the distribution level,the existing relay settings are immune from any small change in the network fault current from new incoming renewables.However,bulk renewable infeed requires modification in the existing protection schemes to accommodate the fault current variation from the incoming renewables.For bulk penetration of the renewable,the requirement of modified/additional protection schemes is unavoidable.Adaptive relaying and non-adaptive relaying schemes are discussed in the literature for protection of power networks,which are experiencing dynamic fault currents and frequent changing network topologies.This article presents a detailed review of protection schemes for renewable integrated power networks which includes distribution,transmission and microgrid systems.The merits and demerits of these protection schemes are also identified in this article for the added interest of the readers.The visible scope of advance protection schemes which may be suitable for providing reliable protection for dynamic fault current networks is also explored.
基金funding of this research is the grand research of the professor with the contract number of(32/UN11.2.1/PT.01.03/PNBP/2020).
文摘Wind power, solar power and water power are technologies that can be used as the main sources of renewable energy so that the target of decarbonisation in the energy sector can be achieved. However, when compared with conventional power plants, they have a significant difference. The share of renewable energy has made a difference and posed various challenges, especially in the power generation system. The reliability of the power system can achieve the decarbonization target but this objective often collides with several challenges and failures, such that they make achievement of the target very vulnerable, Even so, the challenges and technological solutions are still very rarely discussed in the literature. This study carried out specific investigations on various technological solutions and challenges, especially in the power system domain. The results of the review of the solution matrix and the interrelated technological challenges are the most important parts to be developed in the future. Developing a matrix with various renewable technology solutions can help solve RE challenges. The potential of the developed technological solutions is expected to be able to help and prioritize them especially cost-effective energy. In addition, technology solutions that are identified in groups can help reduce certain challenges. The categories developed in this study are used to assist in determining the specific needs and increasing transparency of the renewable energy integration process in the future.
文摘Based on the statistical analysis of emission inventory and ISCST3 model simulation, the emission and ambient concentration contributions of energy-use related sources to the major pollutants of SO2, NOx and PM10 in urban areas of Beijing were analyzed. The SO2 emission contributions of coal burning in power plants, industrial and heating sectors were 49%, 26% and 24% respectively. The vehicle exhaust contributed 74% of the NOx concentration. As to PM10, the industrial sector was the largest emission (28%) and concentration (21%) contributor despite of the fugitive sources. The source emission contributions of VOC and NH3, which greatly influence the generation of secondary pollutants, were discussed as well. This paper also analyzed the control strategies of energy consumption and vehicle sources, based on which the control scenario in 2008 was established and the change of emission and concentration contribution were estimated. The results show that the cleaner energy use, industrial structure improvement, transportation mode modification and single vehicle emission control will greatly improve air quality. The industrial sector will change to the largest contributor of SO2 and as to NOx, vehicle emission control is still important.
