The effect of electropulse on the solidification structure of commercially pure aluminium was studied. The orthogonal array L9 was used to determine the effect of three process parameters of electropulse modification ...The effect of electropulse on the solidification structure of commercially pure aluminium was studied. The orthogonal array L9 was used to determine the effect of three process parameters of electropulse modification （EPM）, which were pulse current intensity, pulse frequency, and treating time. For each factor, three levels were chosen to cover the experimental region. According to the experimental results, the solidification structure of commercially pure aluminium was modified from large grains with columnar crystals to finer grains with equiaxed crystals, by allowing the electropulse to act on liquid aluminium. However, the solidification structures could be refined differently at different EPM parameters. Certain EPM parameters should be selected to get the optimum solidification structure. Among the three parameters, pulse frequency was the most important factor influencing the solidification structure, the secondary factor was current intensity, and treating time was the third one. The optimum parameters were the pulse frequency of 5 Hz, the current intensity of 68 A, and the treating time of l0 s.展开更多
Electropulse modification (EPM) process, a new physical field method for improving the solidification structure of metals was introduced.Different from other research, EPM is only acting pulse current on melt under li...Electropulse modification (EPM) process, a new physical field method for improving the solidification structure of metals was introduced.Different from other research, EPM is only acting pulse current on melt under liquid state.The solidification structure of Al-Si alloys, A1-Cu alloys,cast iron and steel can be modified obviously with this method: the solidification structure of ZL101 alloy presented the Na and Sr modification and the mechanical properties were enhanced; a large number of primary silicon appeared in the microstructure of ZL109 alloy; the equiaxed grain zone was expanded and the grains were fined in Al-5.0wt% Cu alloy; the graphitization took place in solidification process of molten cast iron; the grain sizes of solidification structure of T8 steel were reduced significantly and the shape of steel pearlites also changed; the equiaxed grain zone increased to 88% from original untreated 19%, the equiaxed grains were fined and the intercrystalline crack was avoided in concasting billet by continuously treating liquid electrical sheet steel in tundish.Effects of rare earths on casting Al-Si alloys were also summarized.The method of modifying the solidification structure of rare earth Al-Si alloys with EPM in producing the alloys was proposed.展开更多
基金the National Natural Science Foundation of China (No.30160186).
文摘The effect of electropulse on the solidification structure of commercially pure aluminium was studied. The orthogonal array L9 was used to determine the effect of three process parameters of electropulse modification （EPM）, which were pulse current intensity, pulse frequency, and treating time. For each factor, three levels were chosen to cover the experimental region. According to the experimental results, the solidification structure of commercially pure aluminium was modified from large grains with columnar crystals to finer grains with equiaxed crystals, by allowing the electropulse to act on liquid aluminium. However, the solidification structures could be refined differently at different EPM parameters. Certain EPM parameters should be selected to get the optimum solidification structure. Among the three parameters, pulse frequency was the most important factor influencing the solidification structure, the secondary factor was current intensity, and treating time was the third one. The optimum parameters were the pulse frequency of 5 Hz, the current intensity of 68 A, and the treating time of l0 s.
基金Project supported by the National Natural Science Foundation of China (50344030)
文摘Electropulse modification (EPM) process, a new physical field method for improving the solidification structure of metals was introduced.Different from other research, EPM is only acting pulse current on melt under liquid state.The solidification structure of Al-Si alloys, A1-Cu alloys,cast iron and steel can be modified obviously with this method: the solidification structure of ZL101 alloy presented the Na and Sr modification and the mechanical properties were enhanced; a large number of primary silicon appeared in the microstructure of ZL109 alloy; the equiaxed grain zone was expanded and the grains were fined in Al-5.0wt% Cu alloy; the graphitization took place in solidification process of molten cast iron; the grain sizes of solidification structure of T8 steel were reduced significantly and the shape of steel pearlites also changed; the equiaxed grain zone increased to 88% from original untreated 19%, the equiaxed grains were fined and the intercrystalline crack was avoided in concasting billet by continuously treating liquid electrical sheet steel in tundish.Effects of rare earths on casting Al-Si alloys were also summarized.The method of modifying the solidification structure of rare earth Al-Si alloys with EPM in producing the alloys was proposed.
