The reflection and transmission characteristics of an anisotropic half-space medium normally illuminated by a plane wave are analyzed by kDB coordination. The general formula of reflection coefficient at the air-mediu...The reflection and transmission characteristics of an anisotropic half-space medium normally illuminated by a plane wave are analyzed by kDB coordination. The general formula of reflection coefficient at the air-medium interface is given, and its validity is also discussed. The possible propagating modes in different mediums and the effect of medium parameters on these modes are emphatically studied. This work provides the theoretical preparations for the parameter reconstruction of an anisotropic material.展开更多
A geometry of transient-grating self-referenced spectral interferometry （TG-SRSI） is proposed for weak femtosecond pulse characterization. By using a reflective microscope objective （RMO）, we build a compact, robu...A geometry of transient-grating self-referenced spectral interferometry （TG-SRSI） is proposed for weak femtosecond pulse characterization. By using a reflective microscope objective （RMO）, we build a compact, robust, and easy to adjust device with a higher sensitivity to pulse energy in comparison to all previous SRSI methods. A 65 n J/- 40 fs/1 kHz pulse at 800 nm is successfully characterized, which speaks to the capability of our device to characterize a weak pulse. It is expected to extend the TG-SRSI method to the characterization of femtosecond pulses from oscillators in the near future.展开更多
Dielectric resonator methods constitute one of the most useful techniques for the measurement of electromagnetic material properties in the microwave frequency range. Several geometric configurations are used for this...Dielectric resonator methods constitute one of the most useful techniques for the measurement of electromagnetic material properties in the microwave frequency range. Several geometric configurations are used for this purpose and, in the present paper, we consider the case of a dielectric rod enclosed in a cylindrical metallic enclosure. To carry out dielectric measurements in this system it is necessary to know the highest permittivity constant value for which the resonance condition still can be attained into the cavity. Using an approach based on magnetic and electric Hertzian potentials we have derived the set of TE and TM modes for the relevant geometry described and, then we have calculated the valid dielectric permittivity constant range of measurements for low-loss materials in a cylindrical cavity using a simple resonance frequency condition. Finally, we present a simple application of this method in order to determine the dielectric permittivity constant of heavy oil with 11 API.展开更多
This study investigated and defined the optimal processing parameters for the electrospinning of polysulfone polymer solutions with N,N-dimethylacetamide.Variation of parameters such as solute concentration,electrical...This study investigated and defined the optimal processing parameters for the electrospinning of polysulfone polymer solutions with N,N-dimethylacetamide.Variation of parameters such as solute concentration,electrical voltage,and working distance were correlated with the quality of the obtained nanofibers using morphological characterization via scanning electron microscopy(SEM).Carbonyl iron additive was dispersed in the polymer solutions,using ultrasonic tip,and the material processed via electrospinning with aforementioned parameters defined.Nanofibers with the property of interaction with electromagnetic waves were obtained.The dispersion of different concentrations of the additive and electromagnetic characterizations in the X-band of microwaves(8.2 and 12.4 GHz),using vector network analyzer(VNA)and rectangular waveguide,allowed the identification of the materials electromagnetic behaviors.Scattering parameters allowed the calculation of reflected and transmitted energy by the material.展开更多
The electrical-magnetic characteristics of a Switched Reluctance Motor(SRM)exhibit highly nonlinear relationshipwith respect to the rotor position and excitation current,which poses challenges for both precise static ...The electrical-magnetic characteristics of a Switched Reluctance Motor(SRM)exhibit highly nonlinear relationshipwith respect to the rotor position and excitation current,which poses challenges for both precise static measurements and exact calculation of these properties in real-time control.To guarantee that an in-lab test result can be used in the application,firstly a measurementmethod is proposed to characterize the SRM's electromagnetic properties such as the flux linkage,magnetic co-energy,phase inductance and electromagnetic torque on the basis of an installed SRM control circuitry and half-bridge power converter.By this means the characterization process is equivalent to the online observation in its results.Secondly,a theoreticalmodel is built to discriminate the physical meaning between the incremental inductance and the phase inductance,which is the origin of other relevant parameters.This helps to guide the correct utilization of the characterization result.Thirdly an in-situ cross-validation experimentation according to the magnetizing and demagnetizing status measurement verifies the feasibilities and accuracy of the proposed inductance measuring method,which avoid a dubious FEM-based comparison between the numerical calculation and experimental results.Cross-validation experiment shows that the proposed in-situ characterization scheme obtains an accurate full-range electromagnetic properties.The proposed methodology breaks the barrier between the in-lab measurement and on-line utilization of the SRM parameters,highlighting the merits that it completely includes the in-situ factors and replicates the operational scenario without the need of specifically designed instrumentation,which is especially suitable for rapid field characterization for high power motors.展开更多
文摘The reflection and transmission characteristics of an anisotropic half-space medium normally illuminated by a plane wave are analyzed by kDB coordination. The general formula of reflection coefficient at the air-medium interface is given, and its validity is also discussed. The possible propagating modes in different mediums and the effect of medium parameters on these modes are emphatically studied. This work provides the theoretical preparations for the parameter reconstruction of an anisotropic material.
基金supported by the National Natural Science Foundation of China(Nos.61178006,11274327,and 61221064)the Shanghai Pujiang Program(No.12PJ1409300)the Recruitment Program of Global Experts
文摘A geometry of transient-grating self-referenced spectral interferometry （TG-SRSI） is proposed for weak femtosecond pulse characterization. By using a reflective microscope objective （RMO）, we build a compact, robust, and easy to adjust device with a higher sensitivity to pulse energy in comparison to all previous SRSI methods. A 65 n J/- 40 fs/1 kHz pulse at 800 nm is successfully characterized, which speaks to the capability of our device to characterize a weak pulse. It is expected to extend the TG-SRSI method to the characterization of femtosecond pulses from oscillators in the near future.
文摘Dielectric resonator methods constitute one of the most useful techniques for the measurement of electromagnetic material properties in the microwave frequency range. Several geometric configurations are used for this purpose and, in the present paper, we consider the case of a dielectric rod enclosed in a cylindrical metallic enclosure. To carry out dielectric measurements in this system it is necessary to know the highest permittivity constant value for which the resonance condition still can be attained into the cavity. Using an approach based on magnetic and electric Hertzian potentials we have derived the set of TE and TM modes for the relevant geometry described and, then we have calculated the valid dielectric permittivity constant range of measurements for low-loss materials in a cylindrical cavity using a simple resonance frequency condition. Finally, we present a simple application of this method in order to determine the dielectric permittivity constant of heavy oil with 11 API.
文摘This study investigated and defined the optimal processing parameters for the electrospinning of polysulfone polymer solutions with N,N-dimethylacetamide.Variation of parameters such as solute concentration,electrical voltage,and working distance were correlated with the quality of the obtained nanofibers using morphological characterization via scanning electron microscopy(SEM).Carbonyl iron additive was dispersed in the polymer solutions,using ultrasonic tip,and the material processed via electrospinning with aforementioned parameters defined.Nanofibers with the property of interaction with electromagnetic waves were obtained.The dispersion of different concentrations of the additive and electromagnetic characterizations in the X-band of microwaves(8.2 and 12.4 GHz),using vector network analyzer(VNA)and rectangular waveguide,allowed the identification of the materials electromagnetic behaviors.Scattering parameters allowed the calculation of reflected and transmitted energy by the material.
基金The authors gratefully acknowledge the financial support provided by the National Natural Science Foundation of China(project No.11202125 and project No.51305258).
文摘The electrical-magnetic characteristics of a Switched Reluctance Motor(SRM)exhibit highly nonlinear relationshipwith respect to the rotor position and excitation current,which poses challenges for both precise static measurements and exact calculation of these properties in real-time control.To guarantee that an in-lab test result can be used in the application,firstly a measurementmethod is proposed to characterize the SRM's electromagnetic properties such as the flux linkage,magnetic co-energy,phase inductance and electromagnetic torque on the basis of an installed SRM control circuitry and half-bridge power converter.By this means the characterization process is equivalent to the online observation in its results.Secondly,a theoreticalmodel is built to discriminate the physical meaning between the incremental inductance and the phase inductance,which is the origin of other relevant parameters.This helps to guide the correct utilization of the characterization result.Thirdly an in-situ cross-validation experimentation according to the magnetizing and demagnetizing status measurement verifies the feasibilities and accuracy of the proposed inductance measuring method,which avoid a dubious FEM-based comparison between the numerical calculation and experimental results.Cross-validation experiment shows that the proposed in-situ characterization scheme obtains an accurate full-range electromagnetic properties.The proposed methodology breaks the barrier between the in-lab measurement and on-line utilization of the SRM parameters,highlighting the merits that it completely includes the in-situ factors and replicates the operational scenario without the need of specifically designed instrumentation,which is especially suitable for rapid field characterization for high power motors.
