This paper describes the fundamentals of phase-only liquid crystal on silicon(LCOS)technology,which have not been previously discussed in detail.This technology is widely utilized in high efficiency applications for r...This paper describes the fundamentals of phase-only liquid crystal on silicon(LCOS)technology,which have not been previously discussed in detail.This technology is widely utilized in high efficiency applications for real-time holography and diffractive optics.The paper begins with a brief introduction on the developmental trajectory of phase-only LCOS technology,followed by the correct selection of liquid crystal(LC)materials and corresponding electro-optic effects in such devices.Attention is focused on the essential requirements of the physical aspects of the LC layer as well as the indispensable parameters for the response time of the device.Furthermore,the basic functionalities embedded in the complementary metal oxide semiconductor(CMOS)silicon backplane for phase-only LCOS devices are illustrated,including two typical addressing schemes.Finally,the application of phase-only LCOS devices in real-time holography will be introduced in association with the use of cutting-edge computer-generated holograms.展开更多
Nanoparticles （NPs） with flower-like and frame morphologies were synthesized from CuS, a remarkable transition-metal sulfide. We introduced two kinds of CuS NPs into a nematic liquid crystal （LC） 4-cyano-4＇-n-pen...Nanoparticles （NPs） with flower-like and frame morphologies were synthesized from CuS, a remarkable transition-metal sulfide. We introduced two kinds of CuS NPs into a nematic liquid crystal （LC） 4-cyano-4＇-n-pentylbiphenyl （5CB） and investigated the morphology- and concentration-dependent alignment and electro-optic （E-O） effects of CuS NPs on 5CB. A trace amount of flower-like CuS NPs induced a uniform homeotropic orientation of LC molecules; this is attributable to the obtained desirable compact nanosheet structure. Moreover, both flower-like and frame CuS NPs induced a remarkable improvement in the E-O properties of 5CB, and the flower-like CuS/5CB system exhibited a better performance. The doped CuS NPs in the LC host suppressed the shielding effect and strengthened the electric field, resulting in outstanding E-O properties. At a doping concentration of 0.05 wt.%, CuS NPs were well-dispersed and achieved the optimum E-O performance. This study provides a novel method for inducing a uniform orientation and enhanced E-O properties of LC molecules by doping with extraordinary CuS NPs, leading to potential applications in establishing flexible LC displays.展开更多
High-performance thin film lithium niobate(LN) electro-optic modulators with low cost are in demand. Based on photolithography and wet etching, we experimentally demonstrate a thin film LN Mach–Zehnder modulator with...High-performance thin film lithium niobate(LN) electro-optic modulators with low cost are in demand. Based on photolithography and wet etching, we experimentally demonstrate a thin film LN Mach–Zehnder modulator with a 3 d B bandwidth exceeding 110 GHz, which shows the potential of boosting the throughput and reducing cost. The fabricated modulator also exhibits a comparable low half-wave voltage-length product of ~2.37 V · cm, a high extinction ratio of >23 d B, and the propagation loss of optical waveguides of ~0.2 d B/cm. Besides, six-level pulse amplitude modulation up to 250 Gb/s is successfully achieved.展开更多
A novel scheme for generating optical chaos is proposed and experimentally demonstrated,which supports to simultaneously produce two low-correlation chaotic signals with wideband spectrum and suppressed time-delay-sig...A novel scheme for generating optical chaos is proposed and experimentally demonstrated,which supports to simultaneously produce two low-correlation chaotic signals with wideband spectrum and suppressed time-delay-signature(TDS).In the proposed scheme,we use the output of an external-cavity semiconductor laser(ECSL)as the driving signal of a phase modulator to modulate the output of a CW laser.Then the phase-modulated continuous-wave(CW)light is split into two parts,one is injected back into the ECSL that outputs one chaotic signal,while the other part is passed through a dispersion module for generating another chaotic signal simultaneously.The experimental results prove that the proposed scheme has three merits.Firstly,it can improve the bandwidth of ECSL-based chaos by several times,and simultaneously generate another wideband flat-spectrum chaotic signal.Secondly,the undesired TDS characteristics of the simultaneously-generated chaotic signals can be efficiently suppressed to an indistinguishable level within a wide parameter range,as such the complexities of the chaotic signals are considerably high.Thirdly,the correlation coefficient between these two simultaneously-generated chaotic signals is smaller than 0.1.The proposed scheme provides an attractive solution for parallel multiple chaos generation,and shows great potential for multiple channel chaos communications and multiple random bit generations.展开更多
Recently,high-performance thin-film lithium niobate optical modulators have emerged that,together with advanced multiplexing technologies,are highly expected to satisfy the ever-growing demand for high-capacity optica...Recently,high-performance thin-film lithium niobate optical modulators have emerged that,together with advanced multiplexing technologies,are highly expected to satisfy the ever-growing demand for high-capacity optical interconnects utilizing multiple channels.Accordingly,in this study,a compact lithium-niobate-on-insulator(LNOI)photonic chip was adopted to establish four-channel wavelength-division-multiplexing(WDM)transmitters,comprising four optical modulators based on ultracompact 2×2 Fabry-Perot cavities and a four-channel WDM filter based on multimode waveguide gratings.The fabricated chip with four wavelength channels has a total footprint as compact as 0.3×2.8 mm^(2),and exhibits an excess loss of~0.8 dB as well as low inter-channel crosstalk of<–22 dB.Using this LNOI photonic chip,high-capacity data transmissions of 320 Gbps(4×80 Gbps)on-off-keying signals and 400 Gbps(4×100 Gbps)four-level pulse amplitude signals were successfully realized with the ultra-low power consumption of 11.9 fJ/bit.展开更多
Electro-optic(EO)crystals are important material for all-solid-state laser technology,which can be used to fabricate various laser modulators,such as EO switches,laser deflectors,and optical waveguide.The improvements...Electro-optic(EO)crystals are important material for all-solid-state laser technology,which can be used to fabricate various laser modulators,such as EO switches,laser deflectors,and optical waveguide.The improvements in new high-efficiency EO crystal materials have held great significance to the development of laser technology.Potassium tantalate niobate(KTN)is a popular multifunctional crystal because of its remarkable and excellent quadratic EO effect.KTN EO modulation technology offers numerous advantages,such as high efficiency,good stability,a quick response time,and inertia-free characteristics.In this paper,we summarize the research progress of KTN series crystals systemically,including the theoretical exploration on quadratic EO effect,solid-melt crystal growth technique,comprehensive physical characterization,new physical effect and mechanisms exploration,new EO devices development and design.The EO modulation technique based on the Kerr effect of KTN series crystal offers obvious advantages in reducing the drive voltage and device size,which could better meet the developmental needs of future lasers with a wide wavelength,miniaturization,and integration.This may provide theoretical guidance and an experimental basis for the design and development of new EO crystal devices and promote the development of laser technology.展开更多
Cubic boron nitride (cBN) is a kind of artificial (synthetic) crystal. Transverse electro-optic modulation in a minute cBN sample was carried out. Basing on the practical form of the crystal, we established the theore...Cubic boron nitride (cBN) is a kind of artificial (synthetic) crystal. Transverse electro-optic modulation in a minute cBN sample was carried out. Basing on the practical form of the crystal, we established the theoretical and experimental method according to the sample. For the first time, the linear electro-optic effect was observed in cBN, and half-wave voltage of the cBN sample was measured successfully. Furthermore, its linear electro-optic coefficient was calculated at 1.17×10?14 m/V.展开更多
Many applications of metasurfaces require an ability to dynamically change their properties in the time domain. Electrical tuning techniques are of particular interest, since they pave a way to on-chip integration of ...Many applications of metasurfaces require an ability to dynamically change their properties in the time domain. Electrical tuning techniques are of particular interest, since they pave a way to on-chip integration of metasurfaces with optoelectronic devices.In this work, we propose and experimentally demonstrate an electro-optic lithium niobate(EO-LN) metasurface that shows dynamic modulations to phase retardation of transmitted light. Quasi-bound states in the continuum(QBIC) are observed from this metasurface. By applying external electric voltages, the refractive index of lithium niobate(LN) is changed by Pockels EO nonlinearity, leading to efficient phase modulations to the transmitted light around the QBIC wavelength. The EO-LN metasurface developed in this study opens up new routes for potential applications in the field of displaying, pulse shaping, and spatial light modulating.展开更多
Thin-film lithium niobate electro-optical modulator will become the key device in the future optical communication,which has the advantages of high modulation rate,low half-wave voltage,large bandwidth,and easy integr...Thin-film lithium niobate electro-optical modulator will become the key device in the future optical communication,which has the advantages of high modulation rate,low half-wave voltage,large bandwidth,and easy integration compared with conventional bulk lithium niobate modulator.However,because the electrode gap of the lithium niobate film modulator is very narrow,when the microwave frequency gets higher,it leads to higher microwave loss,and the electro-optical performance of the modulator will be greatly reduced.Here,we propose a thin film lithium niobate electro-optic modulator with a bimetallic layer electrode structure to achieve microwave loss less than 8 dB/cm in the range of 200 GHz,exhibiting a voltage-length product of 1.1 V·cm and a 3 dB electro-optic bandwidth greater than 160 GHz.High-speed data transmission test has been performed,showing good performance.展开更多
Recently,Mach–Zehnder modulators based on thin-film lithium niobate have attracted broad interest for their potential for high modulation bandwidth,low insertion loss,high extinction ratio,and high modulation efficie...Recently,Mach–Zehnder modulators based on thin-film lithium niobate have attracted broad interest for their potential for high modulation bandwidth,low insertion loss,high extinction ratio,and high modulation efficiency.The periodic capacitively loaded traveling-wave electrode is optimally adopted for ultimate high-performances in this type of modulator.However,such an electrode structure on a silicon substrate still suffers from the velocity mismatch and substrate leakage loss for microwave signals.Here,we introduce a thin-film lithium niobate modulator structure using this periodic capacitively loaded electrode on a silicon substrate.Backside holes in the silicon substrate are prepared to solve robustly the above difficulties.The fabricated device exhibits an insertion loss of 0.9 dB,a halfwave-voltage–length product of 2.18 V·cm,and an ultra-wide bandwidth well exceeding 67 GHz for a 10-mm-long device.Data transmissions with rates up to 112 Gb/s are demonstrated.The proposed structure and fabrication strategy are compatible for other types of monolithic and heterogeneous integrated thin-film lithium niobate modulators on a silicon substrate.展开更多
With the advantages of large electro-optical coefficient,wide transparency window,and strong optical confinement,thin-film lithium niobate(TFLN)technique has enabled the development of various high-performance optoele...With the advantages of large electro-optical coefficient,wide transparency window,and strong optical confinement,thin-film lithium niobate(TFLN)technique has enabled the development of various high-performance optoelectronics devices,ranging from the ultra-wideband electro-optic modulators to the high-efficient quantum sources.However,the TFLN platform does not natively promise lasers and photodiodes.This study presents an InP/InGaAs modified uni-traveling carrier(MUTC)photodiodes heterogeneously integrated on the TFLN platform with a record-high 3-dB bandwidth of 110 GHz and a responsivity of 0.4 A/W at a 1,550-nm wavelength.It is implemented in a wafer-level TFLN-InP heterogeneous integration platform and is suitable for the large-scale,multi-function,and high-performance TFLN photonic integrated circuits.展开更多
通过对液晶(LC)S型电光响应曲线的研究,设计了一种由非线性DAC来实现LCD G amm a校正过程。由模拟退火算法获得了C-DAC中7个关键电容参数值,用设计出bu ffer来提高DAC驱动负载的能力,并通过直接译码电路,巧妙地解决了显示输出对比度的问...通过对液晶(LC)S型电光响应曲线的研究,设计了一种由非线性DAC来实现LCD G amm a校正过程。由模拟退火算法获得了C-DAC中7个关键电容参数值,用设计出bu ffer来提高DAC驱动负载的能力,并通过直接译码电路,巧妙地解决了显示输出对比度的问题,经过对M atlab和H sp ice仿真,证明可以实现LCD G amm a校正的功能,解决了显示图像精确逼近原始图像的问题。展开更多
Energy-efficient electro-optic modulators are at the heart of short-reach optical interconnects,and silicon photonics is considered the leading technology for realizing such devices.However,the performance of all-sili...Energy-efficient electro-optic modulators are at the heart of short-reach optical interconnects,and silicon photonics is considered the leading technology for realizing such devices.However,the performance of all-silicon devices is limited by intrinsic material properties.In particular,the absence of linear electro-optic effects in silicon renders the integration of energy-efficient photonic–electronic interfaces challenging.Silicon–organic hybrid(SOH)integration can overcome these limitations by combining nanophotonic silicon waveguides with organic cladding materials,thereby offering the prospect of designing optical properties by molecular engineering.In this paper,we demonstrate an SOH Mach–Zehnder modulator with unprecedented efficiency:the 1-mm-long device consumes only 0.7 fJ bit^(-1) to generate a 12.5 Gbit s^(-1) data stream with a bit-error ratio below the threshold for hard-decision forward-error correction.This power consumption represents the lowest value demonstrated for a non-resonant Mach–Zehnder modulator in any material system.It is enabled by a novel class of organic electro-optic materials that are designed for high chromophore density and enhanced molecular orientation.The device features an electro-optic coefficient of r33<180 pm V^(-1) and can be operated at data rates of up to 40 Gbit s^(-1).展开更多
In this work, the fundamental mechanism regarding the collision and pressure induced optic effect is elucidated. Based on the concept of the collision-relaxation/the pressure-release induced optic effect put forth her...In this work, the fundamental mechanism regarding the collision and pressure induced optic effect is elucidated. Based on the concept of the collision-relaxation/the pressure-release induced optic effect put forth here, a new laser technology may be developed. Furthermore, our work also makes the understanding the photon involved chemical reaction become much clear and rationalized.展开更多
A Mach-Zehnder(MZ) electro-optic(EO) modulator are real iz ed,with three optical layers as polymer materials.The functional layer is the co rona poled crosslinkable polyurethane.The ridge waveguide is fabricated by us...A Mach-Zehnder(MZ) electro-optic(EO) modulator are real iz ed,with three optical layers as polymer materials.The functional layer is the co rona poled crosslinkable polyurethane.The ridge waveguide is fabricated by using the spin-coating,poling,photolithography and oxygen reactive ion etching(RIE) techniques.The mode and the modulation properties of these devices are demonstra ted in a micron control system,while the light source works at the wavelength of 1 31 or 1 55 micron.展开更多
Second-order(χ^((2))) optical nonlinearity is one of the most common mechanisms for modulating and generating coherent light in photonic devices.Due to strong photon confnement and long photon lifetime,integrated mic...Second-order(χ^((2))) optical nonlinearity is one of the most common mechanisms for modulating and generating coherent light in photonic devices.Due to strong photon confnement and long photon lifetime,integrated microresonators have emerged as an ideal platform for investigation of nonlinear optical efects.However,existing silicon-based materials lack a χ^((2)) response due to their centrosymmetric structures.A variety of novel material platforms possessing χ^((2)) nonlinearity have been developed over the past two decades.This review comprehensively summarizes the progress of second-order nonlinear optical efects in integrated microresonators.First,the basic principles of χ^((2)) nonlinear efects are introduced.Afterward,we highlight the commonly used χ^((2)) nonlinear optical materials,including their material properties and respective functional devices.We also discuss the prospects and challenges of utilizing χ^((2)) nonlinearity in the feld of integrated microcavity photonics.展开更多
基金This work was supported by the National Natural Science Foundation of China(61307077)Beijing Natural Science Foundation(4144076)+1 种基金China Postdoctoral Science Foundation(2013M530613)This work was also supported by an EPSRC Platform Grant for LC Photonics(EP/F00897X/1).
文摘This paper describes the fundamentals of phase-only liquid crystal on silicon(LCOS)technology,which have not been previously discussed in detail.This technology is widely utilized in high efficiency applications for real-time holography and diffractive optics.The paper begins with a brief introduction on the developmental trajectory of phase-only LCOS technology,followed by the correct selection of liquid crystal(LC)materials and corresponding electro-optic effects in such devices.Attention is focused on the essential requirements of the physical aspects of the LC layer as well as the indispensable parameters for the response time of the device.Furthermore,the basic functionalities embedded in the complementary metal oxide semiconductor(CMOS)silicon backplane for phase-only LCOS devices are illustrated,including two typical addressing schemes.Finally,the application of phase-only LCOS devices in real-time holography will be introduced in association with the use of cutting-edge computer-generated holograms.
文摘Nanoparticles （NPs） with flower-like and frame morphologies were synthesized from CuS, a remarkable transition-metal sulfide. We introduced two kinds of CuS NPs into a nematic liquid crystal （LC） 4-cyano-4＇-n-pentylbiphenyl （5CB） and investigated the morphology- and concentration-dependent alignment and electro-optic （E-O） effects of CuS NPs on 5CB. A trace amount of flower-like CuS NPs induced a uniform homeotropic orientation of LC molecules; this is attributable to the obtained desirable compact nanosheet structure. Moreover, both flower-like and frame CuS NPs induced a remarkable improvement in the E-O properties of 5CB, and the flower-like CuS/5CB system exhibited a better performance. The doped CuS NPs in the LC host suppressed the shielding effect and strengthened the electric field, resulting in outstanding E-O properties. At a doping concentration of 0.05 wt.%, CuS NPs were well-dispersed and achieved the optimum E-O performance. This study provides a novel method for inducing a uniform orientation and enhanced E-O properties of LC molecules by doping with extraordinary CuS NPs, leading to potential applications in establishing flexible LC displays.
基金This work was supported by the National Natural Science Foundation of China(Nos.61690194 and 61911530162)。
文摘High-performance thin film lithium niobate(LN) electro-optic modulators with low cost are in demand. Based on photolithography and wet etching, we experimentally demonstrate a thin film LN Mach–Zehnder modulator with a 3 d B bandwidth exceeding 110 GHz, which shows the potential of boosting the throughput and reducing cost. The fabricated modulator also exhibits a comparable low half-wave voltage-length product of ~2.37 V · cm, a high extinction ratio of >23 d B, and the propagation loss of optical waveguides of ~0.2 d B/cm. Besides, six-level pulse amplitude modulation up to 250 Gb/s is successfully achieved.
基金This work was supported by the National Natural Science Foundation of China(Grant no.62171087,61671119)the Sichuan Science and Technology Program(Grant no.2021JDJQ0023)the Fundamental Research Funds for the Central Universities(Grant no.ZYGX2019J003).
文摘A novel scheme for generating optical chaos is proposed and experimentally demonstrated,which supports to simultaneously produce two low-correlation chaotic signals with wideband spectrum and suppressed time-delay-signature(TDS).In the proposed scheme,we use the output of an external-cavity semiconductor laser(ECSL)as the driving signal of a phase modulator to modulate the output of a CW laser.Then the phase-modulated continuous-wave(CW)light is split into two parts,one is injected back into the ECSL that outputs one chaotic signal,while the other part is passed through a dispersion module for generating another chaotic signal simultaneously.The experimental results prove that the proposed scheme has three merits.Firstly,it can improve the bandwidth of ECSL-based chaos by several times,and simultaneously generate another wideband flat-spectrum chaotic signal.Secondly,the undesired TDS characteristics of the simultaneously-generated chaotic signals can be efficiently suppressed to an indistinguishable level within a wide parameter range,as such the complexities of the chaotic signals are considerably high.Thirdly,the correlation coefficient between these two simultaneously-generated chaotic signals is smaller than 0.1.The proposed scheme provides an attractive solution for parallel multiple chaos generation,and shows great potential for multiple channel chaos communications and multiple random bit generations.
基金the National Major Research and Development Program(No.2018YFB2200200/2018YFB2200201)National Science Fund for Distinguished Young Scholars(61725503)+4 种基金National Natural Science Foundation of China(NSFC)(91950205,61961146003,92150302,62105283,62205286)Zhejiang Provincial Natural Science Foundation(LD19F050001)Zhejiang Provincial Major Research and Development Program(No.2021C01199)Leading Innovative and Entrepreneur Team Introduction Program of Zhejiang(2021R01001)the Fundamental Research Funds for the Central Universities.The authors thank the Westlake Center for Micro/Nano Fabrication for the partial facility support。
文摘Recently,high-performance thin-film lithium niobate optical modulators have emerged that,together with advanced multiplexing technologies,are highly expected to satisfy the ever-growing demand for high-capacity optical interconnects utilizing multiple channels.Accordingly,in this study,a compact lithium-niobate-on-insulator(LNOI)photonic chip was adopted to establish four-channel wavelength-division-multiplexing(WDM)transmitters,comprising four optical modulators based on ultracompact 2×2 Fabry-Perot cavities and a four-channel WDM filter based on multimode waveguide gratings.The fabricated chip with four wavelength channels has a total footprint as compact as 0.3×2.8 mm^(2),and exhibits an excess loss of~0.8 dB as well as low inter-channel crosstalk of<–22 dB.Using this LNOI photonic chip,high-capacity data transmissions of 320 Gbps(4×80 Gbps)on-off-keying signals and 400 Gbps(4×100 Gbps)four-level pulse amplitude signals were successfully realized with the ultra-low power consumption of 11.9 fJ/bit.
基金supported by the National Natural Science Foundation of China(52072189,and 51972179)Natural Science Foundation of Shandong Province(ZR2020KE019 and ZR2020QE041)+3 种基金Science and Technology Program for Young Innovation Team in Colleges and Universities of Shandong Province,China(2019KJA003)Studio for the Leader of Scientific Research in Jinan(2019GXRC059)Major Innovation Project for Integrating Science,Education&Industry of Qilu University of Technology(Shandong Academy of Sciences)(2022PYI015 and 2022JBZ01-07)Innovation Capability Improvement Project for Small and Mediumsized Technology-based Enterprise of Shandong Province,China(2022TSGC1357).
文摘Electro-optic(EO)crystals are important material for all-solid-state laser technology,which can be used to fabricate various laser modulators,such as EO switches,laser deflectors,and optical waveguide.The improvements in new high-efficiency EO crystal materials have held great significance to the development of laser technology.Potassium tantalate niobate(KTN)is a popular multifunctional crystal because of its remarkable and excellent quadratic EO effect.KTN EO modulation technology offers numerous advantages,such as high efficiency,good stability,a quick response time,and inertia-free characteristics.In this paper,we summarize the research progress of KTN series crystals systemically,including the theoretical exploration on quadratic EO effect,solid-melt crystal growth technique,comprehensive physical characterization,new physical effect and mechanisms exploration,new EO devices development and design.The EO modulation technique based on the Kerr effect of KTN series crystal offers obvious advantages in reducing the drive voltage and device size,which could better meet the developmental needs of future lasers with a wide wavelength,miniaturization,and integration.This may provide theoretical guidance and an experimental basis for the design and development of new EO crystal devices and promote the development of laser technology.
基金supported by the National Natural Science Foundation of China(Grant Nos.60176009,69976013 and 69676025)the Science and Technology Bureau Foundation of Jilin Province(Grant No.20010580).
文摘Cubic boron nitride (cBN) is a kind of artificial (synthetic) crystal. Transverse electro-optic modulation in a minute cBN sample was carried out. Basing on the practical form of the crystal, we established the theoretical and experimental method according to the sample. For the first time, the linear electro-optic effect was observed in cBN, and half-wave voltage of the cBN sample was measured successfully. Furthermore, its linear electro-optic coefficient was calculated at 1.17×10?14 m/V.
基金supported by the Guangdong Major Project of Basic and Applied Basic Research (Grant No.2020B0301030009)the National Key R&D Program of China (Grant Nos.2017YFA0305100,2017YFA0303800,and 2019YFA0705000)+5 种基金the National Natural Science Foundation of China (Grant Nos.92050114,91750204,61775106,11904182,12074200,and 11774185)the 111 Project (Grant No.B07013)PCSIRT (Grant No.IRT0149)the Open Research Program of Key Laboratory of 3D Micro/Nano Fabrication and Characterization of Zhejiang ProvinceFundamental Research Funds for the Central Universities (Grant Nos.010-63201003,01063201008,and 010-63201009)Tianjin Youth Talent Support Program。
文摘Many applications of metasurfaces require an ability to dynamically change their properties in the time domain. Electrical tuning techniques are of particular interest, since they pave a way to on-chip integration of metasurfaces with optoelectronic devices.In this work, we propose and experimentally demonstrate an electro-optic lithium niobate(EO-LN) metasurface that shows dynamic modulations to phase retardation of transmitted light. Quasi-bound states in the continuum(QBIC) are observed from this metasurface. By applying external electric voltages, the refractive index of lithium niobate(LN) is changed by Pockels EO nonlinearity, leading to efficient phase modulations to the transmitted light around the QBIC wavelength. The EO-LN metasurface developed in this study opens up new routes for potential applications in the field of displaying, pulse shaping, and spatial light modulating.
基金supported by the Self-deployment Project of Fujian Science&Technology Innovation Laboratory for Optoelectronic Information of China(No.2021ZZ104)the Fujian Province STS Project(Nos.2020T3002 and 2022T3012)。
文摘Thin-film lithium niobate electro-optical modulator will become the key device in the future optical communication,which has the advantages of high modulation rate,low half-wave voltage,large bandwidth,and easy integration compared with conventional bulk lithium niobate modulator.However,because the electrode gap of the lithium niobate film modulator is very narrow,when the microwave frequency gets higher,it leads to higher microwave loss,and the electro-optical performance of the modulator will be greatly reduced.Here,we propose a thin film lithium niobate electro-optic modulator with a bimetallic layer electrode structure to achieve microwave loss less than 8 dB/cm in the range of 200 GHz,exhibiting a voltage-length product of 1.1 V·cm and a 3 dB electro-optic bandwidth greater than 160 GHz.High-speed data transmission test has been performed,showing good performance.
基金This work was partially supported by the National Natural Science Foundation of China(NSFC)(Nos.62135012,62105107,and 61961146003)Leading Innovative and Entrepreneur Team Introduction Program of Zhejiang(No.2021R01001)。
文摘Recently,Mach–Zehnder modulators based on thin-film lithium niobate have attracted broad interest for their potential for high modulation bandwidth,low insertion loss,high extinction ratio,and high modulation efficiency.The periodic capacitively loaded traveling-wave electrode is optimally adopted for ultimate high-performances in this type of modulator.However,such an electrode structure on a silicon substrate still suffers from the velocity mismatch and substrate leakage loss for microwave signals.Here,we introduce a thin-film lithium niobate modulator structure using this periodic capacitively loaded electrode on a silicon substrate.Backside holes in the silicon substrate are prepared to solve robustly the above difficulties.The fabricated device exhibits an insertion loss of 0.9 dB,a halfwave-voltage–length product of 2.18 V·cm,and an ultra-wide bandwidth well exceeding 67 GHz for a 10-mm-long device.Data transmissions with rates up to 112 Gb/s are demonstrated.The proposed structure and fabrication strategy are compatible for other types of monolithic and heterogeneous integrated thin-film lithium niobate modulators on a silicon substrate.
基金supported by the National Key Research and Development Program(2022YFB2803800)Fundamental Research Funds for the Central Universities(2682022CX025).
文摘With the advantages of large electro-optical coefficient,wide transparency window,and strong optical confinement,thin-film lithium niobate(TFLN)technique has enabled the development of various high-performance optoelectronics devices,ranging from the ultra-wideband electro-optic modulators to the high-efficient quantum sources.However,the TFLN platform does not natively promise lasers and photodiodes.This study presents an InP/InGaAs modified uni-traveling carrier(MUTC)photodiodes heterogeneously integrated on the TFLN platform with a record-high 3-dB bandwidth of 110 GHz and a responsivity of 0.4 A/W at a 1,550-nm wavelength.It is implemented in a wafer-level TFLN-InP heterogeneous integration platform and is suitable for the large-scale,multi-function,and high-performance TFLN photonic integrated circuits.
基金This work was supported by the European Research Council(ERC Starting Grant‘EnTeraPIC’,number 280145)by the Alfried Krupp von Bohlen und Halbach Foundation,and by the Initiative and Networking Fund of the Helmholtz Association+7 种基金We further acknowledge support by the DFG Center for Functional Nanostructuresby the Karlsruhe International Research School on Teratronics,by the Karlsruhe School of Optics and Photonicsby the Karlsruhe Nano-Micro Facility,by the DFG Major Research Instrumentation Programmeby the EU-FP7 projects PHOXTROT and BigPIPESby Deutsche Forschungsgemeinschaftby the Open Access Publishing Fund of Karlsruhe Institute of TechnologyFurther financial support was obtained from the National Science Foundation(DMR-0905686,DMR-0120967)the Air Force Office of Scientific Research(FA9550-09-1-0682)
文摘Energy-efficient electro-optic modulators are at the heart of short-reach optical interconnects,and silicon photonics is considered the leading technology for realizing such devices.However,the performance of all-silicon devices is limited by intrinsic material properties.In particular,the absence of linear electro-optic effects in silicon renders the integration of energy-efficient photonic–electronic interfaces challenging.Silicon–organic hybrid(SOH)integration can overcome these limitations by combining nanophotonic silicon waveguides with organic cladding materials,thereby offering the prospect of designing optical properties by molecular engineering.In this paper,we demonstrate an SOH Mach–Zehnder modulator with unprecedented efficiency:the 1-mm-long device consumes only 0.7 fJ bit^(-1) to generate a 12.5 Gbit s^(-1) data stream with a bit-error ratio below the threshold for hard-decision forward-error correction.This power consumption represents the lowest value demonstrated for a non-resonant Mach–Zehnder modulator in any material system.It is enabled by a novel class of organic electro-optic materials that are designed for high chromophore density and enhanced molecular orientation.The device features an electro-optic coefficient of r33<180 pm V^(-1) and can be operated at data rates of up to 40 Gbit s^(-1).
文摘In this work, the fundamental mechanism regarding the collision and pressure induced optic effect is elucidated. Based on the concept of the collision-relaxation/the pressure-release induced optic effect put forth here, a new laser technology may be developed. Furthermore, our work also makes the understanding the photon involved chemical reaction become much clear and rationalized.
文摘A Mach-Zehnder(MZ) electro-optic(EO) modulator are real iz ed,with three optical layers as polymer materials.The functional layer is the co rona poled crosslinkable polyurethane.The ridge waveguide is fabricated by using the spin-coating,poling,photolithography and oxygen reactive ion etching(RIE) techniques.The mode and the modulation properties of these devices are demonstra ted in a micron control system,while the light source works at the wavelength of 1 31 or 1 55 micron.
基金the National Key Research and Development Program of China(No.2021YFB2800604)the National Natural Science Foundation of China(Grant Nos.91850115 and 11774110)the State Key Laboratory of Applied Optics(No.SKLAO2021001A10).
文摘Second-order(χ^((2))) optical nonlinearity is one of the most common mechanisms for modulating and generating coherent light in photonic devices.Due to strong photon confnement and long photon lifetime,integrated microresonators have emerged as an ideal platform for investigation of nonlinear optical efects.However,existing silicon-based materials lack a χ^((2)) response due to their centrosymmetric structures.A variety of novel material platforms possessing χ^((2)) nonlinearity have been developed over the past two decades.This review comprehensively summarizes the progress of second-order nonlinear optical efects in integrated microresonators.First,the basic principles of χ^((2)) nonlinear efects are introduced.Afterward,we highlight the commonly used χ^((2)) nonlinear optical materials,including their material properties and respective functional devices.We also discuss the prospects and challenges of utilizing χ^((2)) nonlinearity in the feld of integrated microcavity photonics.
