In this paper,a low cost,highly efficient and low profile monopole antenna for ultra-wideband(UWB)applications is presented.A new inverted triangular-shape structure possessing meander lines is designed to achieve a w...In this paper,a low cost,highly efficient and low profile monopole antenna for ultra-wideband(UWB)applications is presented.A new inverted triangular-shape structure possessing meander lines is designed to achieve a wideband response and high efficiency.To design the proposed structure,three steps are utilized to achieve an UWB response.The bandwidth of the proposed antenna is improved with changing meander lines parameters,miniaturization of the ground width and optimization of the feeding line.The measured and simulated frequency band ranges from 3.2 to 12 GHz,while the radiation patterns are measured at 4,5.3,6 and 8 GHz frequency bands.The overall volume of the proposed antenna is 26×25×1.6 mm^(3);whereas the FR4 material is used as a substrate with a relative permittivity and loss tangent of 4.3 and 0.025,correspondingly.The peak gain of 4 dB is achieved with a radiation efficiency of 80 to 98%for the entire wideband.Design modelling of proposed antenna is performed in ANSYS HFSS 13 software.A decent consistency between the simulated and measured results is accomplished which shows that the proposed antenna is a potential candidate for the UWB applications.展开更多
This paper presents a newly designed ultra-thin, lead-free, and all-inorganic solar cell structure. The structure was optimized using the SCAPS-1D simulator, incorporating solid-state layers arranged as n-graphene/CsS...This paper presents a newly designed ultra-thin, lead-free, and all-inorganic solar cell structure. The structure was optimized using the SCAPS-1D simulator, incorporating solid-state layers arranged as n-graphene/CsSnGeI<sub>3</sub>/p-graphene. The objective was to investigate the potential of utilizing n-graphene as the electron transport layer and p-graphene as the hole transport layer to achieve maximum power conversion efficiency. Various materials for the electron transport layer were evaluated. The optimized cell structure achieved a maximum power conversion efficiency of 20.97%. The proposed solar cell structure demonstrates promising potential as an efficient, inorganic photovoltaic device. These findings provide important insights for developing and optimizing inorganic photovoltaic cells based on CsSnGeI<sub>3</sub>, with n-graphene electron transport layers and p-graphene hole transport layers.展开更多
In this paper, a technical review with recent advances of the microstrip antennas loaded with shorting posts is presented. The overall size of the antenna is significantly reduced by a single shorting posts and the ef...In this paper, a technical review with recent advances of the microstrip antennas loaded with shorting posts is presented. The overall size of the antenna is significantly reduced by a single shorting posts and the effect of the various parameters of shorting posts on short-circuit microstrip antenna is also discussed.展开更多
A theoretical study of a conventional boost converter is presented. Based on the real behavior of the components, two models of the boost converter are introduced: one dealing only with losses through inductor and cap...A theoretical study of a conventional boost converter is presented. Based on the real behavior of the components, two models of the boost converter are introduced: one dealing only with losses through inductor and capacitor and another taking into account switching losses in addition to resistive ones. From these two models, the detailed analytical expressions of both voltage gain factor and conversion efficiency are established taking into account the losses through parasitic resistances and switching losses. The behavior of the converter is then analyzed for each model by simulation for the voltage gain factor and the conversion efficiency.展开更多
A novel topology of Integrated Boost-SEPIC (IBS) AC-DC converter using common part sharing method (CPSM) has been proposed in this paper. Conventional boost converters with bridge rectifier configuration are inefficie...A novel topology of Integrated Boost-SEPIC (IBS) AC-DC converter using common part sharing method (CPSM) has been proposed in this paper. Conventional boost converters with bridge rectifier configuration are inefficient due to limited voltage step-up ratio which may not be applicable for high step-up applications as in the case of micro generators. The proposed IBS topology is based on the common part sharing method capable of operating both for positive and negative half cycle of the input signal. Result and simulation were conducted using PSIM environment. The proposed AC-DC IBS topology eliminates the requirement of bridge rectifier achieving high efficiency (about 99%), improved power factor (0.75, leading) and lower THD (about 38.8%) which is within IEEE standard.展开更多
基金the Research Program through the National Research Foundation of Korea,NRF-2019R1A2C1005920,S.K.
文摘In this paper,a low cost,highly efficient and low profile monopole antenna for ultra-wideband(UWB)applications is presented.A new inverted triangular-shape structure possessing meander lines is designed to achieve a wideband response and high efficiency.To design the proposed structure,three steps are utilized to achieve an UWB response.The bandwidth of the proposed antenna is improved with changing meander lines parameters,miniaturization of the ground width and optimization of the feeding line.The measured and simulated frequency band ranges from 3.2 to 12 GHz,while the radiation patterns are measured at 4,5.3,6 and 8 GHz frequency bands.The overall volume of the proposed antenna is 26×25×1.6 mm^(3);whereas the FR4 material is used as a substrate with a relative permittivity and loss tangent of 4.3 and 0.025,correspondingly.The peak gain of 4 dB is achieved with a radiation efficiency of 80 to 98%for the entire wideband.Design modelling of proposed antenna is performed in ANSYS HFSS 13 software.A decent consistency between the simulated and measured results is accomplished which shows that the proposed antenna is a potential candidate for the UWB applications.
文摘This paper presents a newly designed ultra-thin, lead-free, and all-inorganic solar cell structure. The structure was optimized using the SCAPS-1D simulator, incorporating solid-state layers arranged as n-graphene/CsSnGeI<sub>3</sub>/p-graphene. The objective was to investigate the potential of utilizing n-graphene as the electron transport layer and p-graphene as the hole transport layer to achieve maximum power conversion efficiency. Various materials for the electron transport layer were evaluated. The optimized cell structure achieved a maximum power conversion efficiency of 20.97%. The proposed solar cell structure demonstrates promising potential as an efficient, inorganic photovoltaic device. These findings provide important insights for developing and optimizing inorganic photovoltaic cells based on CsSnGeI<sub>3</sub>, with n-graphene electron transport layers and p-graphene hole transport layers.
文摘In this paper, a technical review with recent advances of the microstrip antennas loaded with shorting posts is presented. The overall size of the antenna is significantly reduced by a single shorting posts and the effect of the various parameters of shorting posts on short-circuit microstrip antenna is also discussed.
文摘A theoretical study of a conventional boost converter is presented. Based on the real behavior of the components, two models of the boost converter are introduced: one dealing only with losses through inductor and capacitor and another taking into account switching losses in addition to resistive ones. From these two models, the detailed analytical expressions of both voltage gain factor and conversion efficiency are established taking into account the losses through parasitic resistances and switching losses. The behavior of the converter is then analyzed for each model by simulation for the voltage gain factor and the conversion efficiency.
文摘A novel topology of Integrated Boost-SEPIC (IBS) AC-DC converter using common part sharing method (CPSM) has been proposed in this paper. Conventional boost converters with bridge rectifier configuration are inefficient due to limited voltage step-up ratio which may not be applicable for high step-up applications as in the case of micro generators. The proposed IBS topology is based on the common part sharing method capable of operating both for positive and negative half cycle of the input signal. Result and simulation were conducted using PSIM environment. The proposed AC-DC IBS topology eliminates the requirement of bridge rectifier achieving high efficiency (about 99%), improved power factor (0.75, leading) and lower THD (about 38.8%) which is within IEEE standard.
