With the development of computational power and numerical algorithms,computational fluid dynamics(CFD) has become an important strategy for the design of aircraft,which significantly reduces the reliance on wind-tunne...With the development of computational power and numerical algorithms,computational fluid dynamics(CFD) has become an important strategy for the design of aircraft,which significantly reduces the reliance on wind-tunnel and flight tests.In this paper,we conducted a numerical investigation on the flow past a full commercial aircraft at Mach number 0.2 and 14 degrees angle of attack by means of Reynolds-averaged Navier-Stokes(RANS),detached-eddy simulation(DES) and our newly developed constrained large-eddy simulation(CLES).The objective of this paper is to study the capability of these models in simulating turbulent flows.To our knowledge,this is the first large-eddy simulation method for full commercial aircraft simulation.The results show that the CLES can predict the mean statistical quantities well,qualitatively consistent with traditional methods,and can capture more small-scale structures near the surface of the aircraft with massive separations.Our study demonstrates that CLES is a promising alternative for simulating real engineering turbulent flows.展开更多
The Reynolds-averaged Navier-Stokes（RANS）,such as the original k-ω two-equation closures,have been very popular in providing good prediction for a wide variety of flows with presently available computational resour...The Reynolds-averaged Navier-Stokes（RANS）,such as the original k-ω two-equation closures,have been very popular in providing good prediction for a wide variety of flows with presently available computational resource.But for cavitating flows,the above equations noticeably over-predict turbulent production and hence effective viscosity.In this paper,the detached eddy simulation（DES） method for time-dependent turbulent cavitating flows is investigated.To assess the state-of-the-art of computational capabilities,different turbulence models including the widely used RANS model and DES model are conducted.Firstly,in order to investigate the grid dependency in computations,different grid sizes are adopted in the computation.Furthermore,the credibility of DES model is supported by the unsteady cavitating flows over a 2D hydrofoil.The results show that the DES model can effectively reduce the eddy viscosities.From the experimental validations regarding the force analysis,frequency and the unsteady cavity visualizations,more favorable agreement with experimental visualizations and measurements are obtained by DES model.DES model is better able to capture unsteady phenomena including cavity length and the resulting hydrodynamic characteristics,reproduces the time-averaged velocity quantitatively around the hydrofoil,and yields more acceptable and unsteady dynamics features.The DES model has shown to be effective in improving the overall predictive capability of unsteady cavitating flows.展开更多
A modified scale-adaptive simulation （SAS） technique based on the Spalart- Allmaras （SA） model is proposed. To clarify its capability in prediction of the complex turbulent flow, two typical cases are carried out,...A modified scale-adaptive simulation （SAS） technique based on the Spalart- Allmaras （SA） model is proposed. To clarify its capability in prediction of the complex turbulent flow, two typical cases are carried out, i.e., the subcritical flow past a circular cylinder and the transonic flow over a hemisphere cylinder. For comparison, the same cases are calculated by the detached-eddy simulation （DES）, the delayed-detached eddy simulation （DDES）, and the XY-SAS approaches. Some typical results including the mean pressure coefficient, velocity, and Reynolds stress profiles are obtained and compared with the experiments. Extensive calculations show that the proposed SAS technique can give better prediction of the massively separated flow and shock/turbulent-boundary-layer interaction than the DES and DDES methods. Furthermore, by the comparison of the XY-SAS model with the present SAS model, some improvements can be obtained.展开更多
基金supported by the National Natural Science Foundation of China(Grant Nos.10921202 and 91130001)the National Basic Research Program of China(Grant No. 2009CB724101)
文摘With the development of computational power and numerical algorithms,computational fluid dynamics(CFD) has become an important strategy for the design of aircraft,which significantly reduces the reliance on wind-tunnel and flight tests.In this paper,we conducted a numerical investigation on the flow past a full commercial aircraft at Mach number 0.2 and 14 degrees angle of attack by means of Reynolds-averaged Navier-Stokes(RANS),detached-eddy simulation(DES) and our newly developed constrained large-eddy simulation(CLES).The objective of this paper is to study the capability of these models in simulating turbulent flows.To our knowledge,this is the first large-eddy simulation method for full commercial aircraft simulation.The results show that the CLES can predict the mean statistical quantities well,qualitatively consistent with traditional methods,and can capture more small-scale structures near the surface of the aircraft with massive separations.Our study demonstrates that CLES is a promising alternative for simulating real engineering turbulent flows.
基金supported by National Natural Science Foundation of China (Grant No.11172040)
文摘The Reynolds-averaged Navier-Stokes（RANS）,such as the original k-ω two-equation closures,have been very popular in providing good prediction for a wide variety of flows with presently available computational resource.But for cavitating flows,the above equations noticeably over-predict turbulent production and hence effective viscosity.In this paper,the detached eddy simulation（DES） method for time-dependent turbulent cavitating flows is investigated.To assess the state-of-the-art of computational capabilities,different turbulence models including the widely used RANS model and DES model are conducted.Firstly,in order to investigate the grid dependency in computations,different grid sizes are adopted in the computation.Furthermore,the credibility of DES model is supported by the unsteady cavitating flows over a 2D hydrofoil.The results show that the DES model can effectively reduce the eddy viscosities.From the experimental validations regarding the force analysis,frequency and the unsteady cavity visualizations,more favorable agreement with experimental visualizations and measurements are obtained by DES model.DES model is better able to capture unsteady phenomena including cavity length and the resulting hydrodynamic characteristics,reproduces the time-averaged velocity quantitatively around the hydrofoil,and yields more acceptable and unsteady dynamics features.The DES model has shown to be effective in improving the overall predictive capability of unsteady cavitating flows.
基金Project supported by the National Natural Science Foundation of China(No.11202100)the Natural Science Fund in Jiangsu Province(No.BK2011723)+1 种基金the Fundamental Research Funds for the Central Universities(No.NS2012032)the Priority Academic Program Development of Jiangsu Higher Education Institutions
文摘A modified scale-adaptive simulation （SAS） technique based on the Spalart- Allmaras （SA） model is proposed. To clarify its capability in prediction of the complex turbulent flow, two typical cases are carried out, i.e., the subcritical flow past a circular cylinder and the transonic flow over a hemisphere cylinder. For comparison, the same cases are calculated by the detached-eddy simulation （DES）, the delayed-detached eddy simulation （DDES）, and the XY-SAS approaches. Some typical results including the mean pressure coefficient, velocity, and Reynolds stress profiles are obtained and compared with the experiments. Extensive calculations show that the proposed SAS technique can give better prediction of the massively separated flow and shock/turbulent-boundary-layer interaction than the DES and DDES methods. Furthermore, by the comparison of the XY-SAS model with the present SAS model, some improvements can be obtained.
