As shallow resources are increasingly depleted,the mechanics'theory and testing technology of deep insitu rock has become urgent.Traditional coring technologies obtain rock samples without retaining the in-situ en...As shallow resources are increasingly depleted,the mechanics'theory and testing technology of deep insitu rock has become urgent.Traditional coring technologies obtain rock samples without retaining the in-situ environmental conditions,leading to distortion of the measured parameters.Herein,a coring and testing systems retaining in-situ geological conditions is presented:the coring system that obtains in-situ rock samples,and the transfer and testing system that stores and analyzes the rocks under a reconstructed environment.The ICP-Coring system mainly consists of the pressure controller,active insulated core reactor and insulation layer and sealing film.The ultimate bearing strength of 100 MPa for pressurepreservation,temperature control accuracy of 0.97%for temperature-retained are realized.CH_(4)and CO permeability of the optimized sealing film are as low as 3.85 and 0.33 ppm/min.The average tensile elongation of the film is 152.4%and the light transmittance is reduced to 0%.Additionally,the pressure and steady-state temperature accuracy for reconstructing the in-situ environment of transfer and storage system up to 1%and±0.2 is achieved.The error recorded of the noncontact sensor ring made of lowdensity polymer is less than 6%than that of the contact test.The system can provide technical support for the deep in-situ rock mechanics research,improving deep resource acquisition capabilities and further clarifying deep-earth processes.展开更多
As an important branch of geophysical exploration method,the electromagnetic method with artificial source has advanced rapidly in the past decade.These methods are classified as airborne electromagnetic method,ground...As an important branch of geophysical exploration method,the electromagnetic method with artificial source has advanced rapidly in the past decade.These methods are classified as airborne electromagnetic method,ground-air electromagnetic method,ground electromagnetic method,and marine electromagnetic method.Over the years,researchers in China have made significant improvement to the fundamental theory,forward modeling and inverse for series of electromagnetic detection methods.Conversely,significant progress was made in the development of corresponding equipment.The researched techniques and their developed equipment have been successfully utilized to detect underground targets as deep as 10 km.However,there is increasing need for deep resources exploration,urban subsurface study,and prediction,monitoring and detection of geological hazards.To meet the increasing need and catch up with the advanced international level of exploration technologies and developed equipment,there is urgent necessity and requirement to continue developing geophysical methods and the corresponding equipment.展开更多
PhaseNet and EQTransformer are two state-of-the-art earthquake detection methods that have been increasingly applied worldwide.To evaluate the generaliz-ation ability of the two models and provide insights for the dev...PhaseNet and EQTransformer are two state-of-the-art earthquake detection methods that have been increasingly applied worldwide.To evaluate the generaliz-ation ability of the two models and provide insights for the development of new models,this study took the sequences of the Yunnan Yangbi M6.4 earthquake and Qinghai Maduo M7.4 earthquake as examples to compare the earthquake detection effects of the two abovementioned models as well as their abilities to process dense seismic sequences.It has been demonstrated from the corresponding research that due to the differences in seismic waveforms found in different geographical regions,the picking performance is reduced when the two models are applied directly to the detection of the Yangbi and Maduo earthquakes.PhaseNet has a higher recall than EQTransformer,but the recall of both models is reduced by 13%-56%when compared with the results rep-orted in the original papers.The analysis results indicate that neural networks with deeper layers and complex structures may not necessarily enhance earthquake detection perfor-mance.In designing earthquake detection models,attention should be paid to not only the balance of depth,width,and architecture but also to the quality and quantity of the training datasets.In addition,noise datasets should be incorporated during training.According to the continuous waveforms detected 21 days before the Yangbi and Maduo earthquakes,the Yangbi earthquake exhibited foreshock,while the Maduo earthquake showed no foreshock activity,indicating that the two earthquakes’nucleation processes were different.展开更多
基金supported by the Program for Guangdong Introducing Innovative and Enterpreneurial Teams(No.2019ZT08G315)National Natural Science Foundation of China(No.51827901,U2013603,and 52004166)。
文摘As shallow resources are increasingly depleted,the mechanics'theory and testing technology of deep insitu rock has become urgent.Traditional coring technologies obtain rock samples without retaining the in-situ environmental conditions,leading to distortion of the measured parameters.Herein,a coring and testing systems retaining in-situ geological conditions is presented:the coring system that obtains in-situ rock samples,and the transfer and testing system that stores and analyzes the rocks under a reconstructed environment.The ICP-Coring system mainly consists of the pressure controller,active insulated core reactor and insulation layer and sealing film.The ultimate bearing strength of 100 MPa for pressurepreservation,temperature control accuracy of 0.97%for temperature-retained are realized.CH_(4)and CO permeability of the optimized sealing film are as low as 3.85 and 0.33 ppm/min.The average tensile elongation of the film is 152.4%and the light transmittance is reduced to 0%.Additionally,the pressure and steady-state temperature accuracy for reconstructing the in-situ environment of transfer and storage system up to 1%and±0.2 is achieved.The error recorded of the noncontact sensor ring made of lowdensity polymer is less than 6%than that of the contact test.The system can provide technical support for the deep in-situ rock mechanics research,improving deep resource acquisition capabilities and further clarifying deep-earth processes.
基金supported by the Beijing Science and Technology Plan(Grant No.Z181100005718001)the National Key R&D Program(Grant No.2017YFC0601204)the National Natural Science Foundation of China(Grant Nos.41874088&41830101)。
文摘As an important branch of geophysical exploration method,the electromagnetic method with artificial source has advanced rapidly in the past decade.These methods are classified as airborne electromagnetic method,ground-air electromagnetic method,ground electromagnetic method,and marine electromagnetic method.Over the years,researchers in China have made significant improvement to the fundamental theory,forward modeling and inverse for series of electromagnetic detection methods.Conversely,significant progress was made in the development of corresponding equipment.The researched techniques and their developed equipment have been successfully utilized to detect underground targets as deep as 10 km.However,there is increasing need for deep resources exploration,urban subsurface study,and prediction,monitoring and detection of geological hazards.To meet the increasing need and catch up with the advanced international level of exploration technologies and developed equipment,there is urgent necessity and requirement to continue developing geophysical methods and the corresponding equipment.
基金funded by the National Key R&D Program of China(No.2021YFC3000702)the National Natural Science Foundation of China(No.41774067)the Fundamental Research Funds for the Institute of Geophysics,China Earthquake Administration(Nos.DQ JB21Z05,DQJB20X07).
文摘PhaseNet and EQTransformer are two state-of-the-art earthquake detection methods that have been increasingly applied worldwide.To evaluate the generaliz-ation ability of the two models and provide insights for the development of new models,this study took the sequences of the Yunnan Yangbi M6.4 earthquake and Qinghai Maduo M7.4 earthquake as examples to compare the earthquake detection effects of the two abovementioned models as well as their abilities to process dense seismic sequences.It has been demonstrated from the corresponding research that due to the differences in seismic waveforms found in different geographical regions,the picking performance is reduced when the two models are applied directly to the detection of the Yangbi and Maduo earthquakes.PhaseNet has a higher recall than EQTransformer,but the recall of both models is reduced by 13%-56%when compared with the results rep-orted in the original papers.The analysis results indicate that neural networks with deeper layers and complex structures may not necessarily enhance earthquake detection perfor-mance.In designing earthquake detection models,attention should be paid to not only the balance of depth,width,and architecture but also to the quality and quantity of the training datasets.In addition,noise datasets should be incorporated during training.According to the continuous waveforms detected 21 days before the Yangbi and Maduo earthquakes,the Yangbi earthquake exhibited foreshock,while the Maduo earthquake showed no foreshock activity,indicating that the two earthquakes’nucleation processes were different.
