In our study we investigated a refractory copper-nickel sulfide ore separation by using a cyclonic-static micro-bubble flotation column (FCSMC). The process mineralogy of the main products was studied. Using a scannin...In our study we investigated a refractory copper-nickel sulfide ore separation by using a cyclonic-static micro-bubble flotation column (FCSMC). The process mineralogy of the main products was studied. Using a scanning electron microscope-energy dispersive system (SEM-EDS) and an X-ray spectrometer the mineral category and content of samples were analyzed. By using a mineral liberation analyzer (MLA) the mineral liberation characteristics were revealed. It is shown that in roughing feed the monomers liberation degree of nickel pyrite and chalcopyrite take up 84.11% and 88.82%, respectively. In tailings, the lost nickel pyrite and chalcopyrite are mainly monomers. Therefore, strengthening the micro-fine particle recovery capacity is the key to increase recovery.展开更多
The cyclonic-static microbubble flotation column has dual effects including the cyclonic separation and floatation separation with the characteristics of the small lower limit of the effective separation size, short s...The cyclonic-static microbubble flotation column has dual effects including the cyclonic separation and floatation separation with the characteristics of the small lower limit of the effective separation size, short separation time, large handling capacity, and low operation cost. It shows significant advantages in the oily wastewater treatment field, especially the polymer flooding oily wastewater treatment aspect. In this paper, the cyclonic separation function mechanism of the cyclonic-static microbubble flotation column was studied, the impact of the parameters including the feeding rate, aeration rate, circulating pressure, and underflow split ratio on the cyclonic separation efficiency was investigated, and the cyclonic separation efficiency model was established as well. In addition, by applying the Doppler Laser Velocimeter (LDV) and Fluent simulation software, the test and simulation to the single-phase flow velocity field of the cyclonic separation section of the cyclonic-static microbubble flotation column were carried out, and the velocity distribution rule of the cyclonic separation section was analyzed under the singlephase flow conditions.展开更多
Improved fluid dynamics can enhance the separation efficiency of flotation methods. A Computational Fluid Dynamics simulation using FLUENT was performed to model the fluid environment of a cyclonic-sta- tic micro bubb...Improved fluid dynamics can enhance the separation efficiency of flotation methods. A Computational Fluid Dynamics simulation using FLUENT was performed to model the fluid environment of a cyclonic-sta- tic micro bubble flotation column. The simulation results visually show the interior flow and illustrate mix- ing of the different flows within the apparatus. An analysis of the distribution in velocity and vorticity was used to analyze the separation mechanism and the synergism of the component parts and to strengthen the design of each unit. The conclusions are that axial back mixing and vortexes still exist in the separation unit even in the presence of packing media. The inverted cone structure near the tangential inlet （cone 1 ） within the cyclonic unit is the main reason for this. The cone 1 structure enhances swirling and focuses energy within the inner area of the cone where there are abundant bubbles. As a result slowly floating minerals are forcibly recovered and railings are effectively separated within this unit. However, cone 1 also reduces the vorticity downstream from it, which reduces the efficiency of railings separation within this part. Therefore, the design of cone 1 should be based on the principles of lessening disturbances to the column unit while strengthening the separation effect of the cyclonic unit. Also, the axial distance between the paired cyclonic structures at the bottom of the column （cone 2） and cone 1 poses tough requirements because of an interaction between separation of the middlings and railings.展开更多
基金Projects 2008BAB31B01 supported by the National Key Technology R&D Program in the 11th Five-Year Plan of China50834006 by the National Natural Science Foundation of China
文摘In our study we investigated a refractory copper-nickel sulfide ore separation by using a cyclonic-static micro-bubble flotation column (FCSMC). The process mineralogy of the main products was studied. Using a scanning electron microscope-energy dispersive system (SEM-EDS) and an X-ray spectrometer the mineral category and content of samples were analyzed. By using a mineral liberation analyzer (MLA) the mineral liberation characteristics were revealed. It is shown that in roughing feed the monomers liberation degree of nickel pyrite and chalcopyrite take up 84.11% and 88.82%, respectively. In tailings, the lost nickel pyrite and chalcopyrite are mainly monomers. Therefore, strengthening the micro-fine particle recovery capacity is the key to increase recovery.
基金the National Natural Science Foundation of China (No. 50974119) for the financial support for this project
文摘The cyclonic-static microbubble flotation column has dual effects including the cyclonic separation and floatation separation with the characteristics of the small lower limit of the effective separation size, short separation time, large handling capacity, and low operation cost. It shows significant advantages in the oily wastewater treatment field, especially the polymer flooding oily wastewater treatment aspect. In this paper, the cyclonic separation function mechanism of the cyclonic-static microbubble flotation column was studied, the impact of the parameters including the feeding rate, aeration rate, circulating pressure, and underflow split ratio on the cyclonic separation efficiency was investigated, and the cyclonic separation efficiency model was established as well. In addition, by applying the Doppler Laser Velocimeter (LDV) and Fluent simulation software, the test and simulation to the single-phase flow velocity field of the cyclonic separation section of the cyclonic-static microbubble flotation column were carried out, and the velocity distribution rule of the cyclonic separation section was analyzed under the singlephase flow conditions.
基金supported by the National Natural Science Foundation of China (No. 51074157)the Foundation of China University of Mining and Technology (No. 2011QNA08)
文摘Improved fluid dynamics can enhance the separation efficiency of flotation methods. A Computational Fluid Dynamics simulation using FLUENT was performed to model the fluid environment of a cyclonic-sta- tic micro bubble flotation column. The simulation results visually show the interior flow and illustrate mix- ing of the different flows within the apparatus. An analysis of the distribution in velocity and vorticity was used to analyze the separation mechanism and the synergism of the component parts and to strengthen the design of each unit. The conclusions are that axial back mixing and vortexes still exist in the separation unit even in the presence of packing media. The inverted cone structure near the tangential inlet （cone 1 ） within the cyclonic unit is the main reason for this. The cone 1 structure enhances swirling and focuses energy within the inner area of the cone where there are abundant bubbles. As a result slowly floating minerals are forcibly recovered and railings are effectively separated within this unit. However, cone 1 also reduces the vorticity downstream from it, which reduces the efficiency of railings separation within this part. Therefore, the design of cone 1 should be based on the principles of lessening disturbances to the column unit while strengthening the separation effect of the cyclonic unit. Also, the axial distance between the paired cyclonic structures at the bottom of the column （cone 2） and cone 1 poses tough requirements because of an interaction between separation of the middlings and railings.
