Vertical orthogonal joints are a common feature in shallow crustal rocks.There are several competing theories for their formation despite the ubiquity.We examined the exceptional exposures of orthogonal joints in flat...Vertical orthogonal joints are a common feature in shallow crustal rocks.There are several competing theories for their formation despite the ubiquity.We examined the exceptional exposures of orthogonal joints in flat-lying Ordovician limestone beds from the Havre-Saint-Pierre Region in Quebec,Canada(north shore of Saint-Lawrence River)to test conceptual models of joint formation in a natural setting.In the region,the spacing of cross-joints is consistently larger than the spacing of systematic joints by a factor of 1.5 approximately.The joint-spacing-to-bed-thickness ratios(s/t)are much larger in these beds(s/t=4.3 for systematic joints,and 6.4 for cross-joints)than those in higher strained strata along the south shore of the Saint-Lawrence River(s/t=1),highlighting the effect of tectonic strain in decreasing fracture spacing and block size.The high values of s/t indicate that cross-joint formation was unlikely caused by a switch from compression to tension once a critical s/t ratio for systematic joints was reached(as hypothesized in previous studies).We proposed a new model for the formation of orthogonal joint systems where the principal stress axes locally switch during the formation of systematic fractures.The presence of ladder-shaped orthogonal joints suggests a state of effective stress withσ_(1)^(∗)≫0>σ_(2)^(∗)>σ_(3)^(∗)and whereσ_(2)^(∗)-σ_(3)^(∗)is within the range of fracture strength variability at the time of fracture.This research provides a new mechanical model for the formation of orthogonal joint systems and cuboidal blocks.展开更多
针对人体动作的特征提取法,该文提出了基于方向梯度的相关图算法Correlogram of Oriented Gradient（COG）,它是通过检查视频动作中的时间空间兴趣点和以兴趣点为中心的空间立方体,计算并提取空间立方体的时间空间方向梯度所具有的空间...针对人体动作的特征提取法,该文提出了基于方向梯度的相关图算法Correlogram of Oriented Gradient（COG）,它是通过检查视频动作中的时间空间兴趣点和以兴趣点为中心的空间立方体,计算并提取空间立方体的时间空间方向梯度所具有的空间结构分布特性和外观信息,建立不同动作的特征模型,并用支持向量机（SVM）分类器来检验特征模型的识别准确率;最后,通过对比基于方向梯度的柱状图算法Histogram of Oriented Gradient（HOG）,该文提出的COG算法的识别准确率比HOG算法高15%左右。展开更多
Three-dimensional medical image visualization becomes an essential part for medical field, including computer aided diagnosis, surgery planning and simulation, artificial limb surgery, radiotherapy planning, and teach...Three-dimensional medical image visualization becomes an essential part for medical field, including computer aided diagnosis, surgery planning and simulation, artificial limb surgery, radiotherapy planning, and teaching etc. In this paper, marching cubes algorithm is adopted to reconstruct the 3-D images for the CT image sequence in DICOM format under theVC＋＋6.0 and the visual package VTK platform. The relatively simple interactive operations such as rotation and transfer can be realized on the platform. Moreover, the normal vector and interior point are calculated to form the virtual clipping plane, which is then used to incise the 3-D object. Information of the virtual slice can be obtained, in the mean while the virtual slice images are displayed on the screen. The technique can realize the real time interaction extraction of virtual slice on 3-D CT image. The cuboids structured can be zoomed, moved and eircumrotated by operating mouse to incise the 3-D reconstruction object. Real time interaction can be realized by clipping the reconstruction object. The coordinates can be acquired by the mouse clicking in the 3D space, to realize the point mouse pick-up as well angle and distance interactive measurement. We can get quantitative information about 3-D images through measurement.展开更多
As a direct bandgap semiconductor, organic-inorganic lead halide perovskite (MAPbX3, MA = CH3NH3, X =Cl, Br, I) have been considered as promising materials for laser due to their excellent optoelectronic properties. T...As a direct bandgap semiconductor, organic-inorganic lead halide perovskite (MAPbX3, MA = CH3NH3, X =Cl, Br, I) have been considered as promising materials for laser due to their excellent optoelectronic properties. The perovskite materials with ID and 2D shapes were widely prepared and studied for Fabry-Perot mode and whispering-gallery-mode (WGM) microcavities, but cuboid-shape is rarely reported. In this work, we successfully fabricated single crystal cuboid-shaped MAPbBr3 perovskite w让h different morphologies, named microcuboid-MAPbBr3 (M-MAPbBr3) and multi-step-MAPbBr3 (MSMAPbBr3), via solvothermal method. Furthermore, the as-prepared *crystals excitonic recombination lifetime under different pumping energy density was studied by time-resolved photoiuminescence (TRPL). Based on controllable morphology and remarkable lasing properties, these cuboid shaped single crystal perovskite could be a promising candidate for small laser, and other optoelectronic devices.展开更多
基金The authors express their gratitude to the Natural Sciences and Engineering Research Council of Canada for financial support through a Discovery Grant(Grant No.06408).
文摘Vertical orthogonal joints are a common feature in shallow crustal rocks.There are several competing theories for their formation despite the ubiquity.We examined the exceptional exposures of orthogonal joints in flat-lying Ordovician limestone beds from the Havre-Saint-Pierre Region in Quebec,Canada(north shore of Saint-Lawrence River)to test conceptual models of joint formation in a natural setting.In the region,the spacing of cross-joints is consistently larger than the spacing of systematic joints by a factor of 1.5 approximately.The joint-spacing-to-bed-thickness ratios(s/t)are much larger in these beds(s/t=4.3 for systematic joints,and 6.4 for cross-joints)than those in higher strained strata along the south shore of the Saint-Lawrence River(s/t=1),highlighting the effect of tectonic strain in decreasing fracture spacing and block size.The high values of s/t indicate that cross-joint formation was unlikely caused by a switch from compression to tension once a critical s/t ratio for systematic joints was reached(as hypothesized in previous studies).We proposed a new model for the formation of orthogonal joint systems where the principal stress axes locally switch during the formation of systematic fractures.The presence of ladder-shaped orthogonal joints suggests a state of effective stress withσ_(1)^(∗)≫0>σ_(2)^(∗)>σ_(3)^(∗)and whereσ_(2)^(∗)-σ_(3)^(∗)is within the range of fracture strength variability at the time of fracture.This research provides a new mechanical model for the formation of orthogonal joint systems and cuboidal blocks.
文摘针对人体动作的特征提取法,该文提出了基于方向梯度的相关图算法Correlogram of Oriented Gradient（COG）,它是通过检查视频动作中的时间空间兴趣点和以兴趣点为中心的空间立方体,计算并提取空间立方体的时间空间方向梯度所具有的空间结构分布特性和外观信息,建立不同动作的特征模型,并用支持向量机（SVM）分类器来检验特征模型的识别准确率;最后,通过对比基于方向梯度的柱状图算法Histogram of Oriented Gradient（HOG）,该文提出的COG算法的识别准确率比HOG算法高15%左右。
基金National 973 Basic Research Program of Chinagrant number:2010CB732600+4 种基金Major Research Equipment Fund of the Chinese Academy of Sciences and Knowledge Innovation Project of the Chinese Academy of Sciences,2008 Shenzhen Controversial Technology Innovation Research Projectsgrant number:FG200805230224AConcentration plan of innovation sources of Shenzhen-R&D projects of international cooperation on science and technologygrant number:ZYA200903260065ANatural Science Foundation of Guangdong Province,China 8478922035-X0007007
文摘Three-dimensional medical image visualization becomes an essential part for medical field, including computer aided diagnosis, surgery planning and simulation, artificial limb surgery, radiotherapy planning, and teaching etc. In this paper, marching cubes algorithm is adopted to reconstruct the 3-D images for the CT image sequence in DICOM format under theVC＋＋6.0 and the visual package VTK platform. The relatively simple interactive operations such as rotation and transfer can be realized on the platform. Moreover, the normal vector and interior point are calculated to form the virtual clipping plane, which is then used to incise the 3-D object. Information of the virtual slice can be obtained, in the mean while the virtual slice images are displayed on the screen. The technique can realize the real time interaction extraction of virtual slice on 3-D CT image. The cuboids structured can be zoomed, moved and eircumrotated by operating mouse to incise the 3-D reconstruction object. Real time interaction can be realized by clipping the reconstruction object. The coordinates can be acquired by the mouse clicking in the 3D space, to realize the point mouse pick-up as well angle and distance interactive measurement. We can get quantitative information about 3-D images through measurement.
基金supported by the National Natural Science Foundation of China(11674023,51331002,51622205,61675027,61505010,51502018,51525202 and 51432005)111 Project(B170003)+2 种基金the National Key Research and Development Program of China(2016YFA0202703)Beijing Natural Science Foundation(4181004 and 4182080)the ‘‘Thousand Talents” Program of China for Pioneering Researchers and Innovative Teams(U1404619)
文摘As a direct bandgap semiconductor, organic-inorganic lead halide perovskite (MAPbX3, MA = CH3NH3, X =Cl, Br, I) have been considered as promising materials for laser due to their excellent optoelectronic properties. The perovskite materials with ID and 2D shapes were widely prepared and studied for Fabry-Perot mode and whispering-gallery-mode (WGM) microcavities, but cuboid-shape is rarely reported. In this work, we successfully fabricated single crystal cuboid-shaped MAPbBr3 perovskite w让h different morphologies, named microcuboid-MAPbBr3 (M-MAPbBr3) and multi-step-MAPbBr3 (MSMAPbBr3), via solvothermal method. Furthermore, the as-prepared *crystals excitonic recombination lifetime under different pumping energy density was studied by time-resolved photoiuminescence (TRPL). Based on controllable morphology and remarkable lasing properties, these cuboid shaped single crystal perovskite could be a promising candidate for small laser, and other optoelectronic devices.
