Cu（OH）2 nano-fibers were prepared by chemical precipitation with CuSO4·5H2O and NaOH as raw materials. The Cu（OH）2 nano-fibers have a diameter of 10-30 nm and a length of 1-6 μm. The reaction conditions were...Cu（OH）2 nano-fibers were prepared by chemical precipitation with CuSO4·5H2O and NaOH as raw materials. The Cu（OH）2 nano-fibers have a diameter of 10-30 nm and a length of 1-6 μm. The reaction conditions were as follows： the concentration of CuSO4 solution was 0.1 mol·L^-1,NaOH solution 4 mol·L^-1,the dropping rate of the NaOH solution 50 mL·min^-1,the reaction temperature 20℃the pH value of the reaction terminal 13,and the stirring rate 1200 r·min^-1. The chain nano-CuO grains were obtained through the microwave radiation of the Cu（OH）2 nano-fibers.展开更多
Herein,we first describe the physical mixture of Cu(OH)_2/Fe(OH)_3 as a composite catalyst precursor for the dehydrogenation of ammonia borane(AB)in methanol.During the initial period of catalytic reaction,Cu nanopart...Herein,we first describe the physical mixture of Cu(OH)_2/Fe(OH)_3 as a composite catalyst precursor for the dehydrogenation of ammonia borane(AB)in methanol.During the initial period of catalytic reaction,Cu nanoparticles were formed in-situ.The catalytic activity of Cu nanoparticles can be significantly enhanced with the assistance of Fe species and OH~à.A maximum turnover frequency(TOF)of 50.3 mol_(H2)mol^(à1)_(total metal)min^(à1)(135.6 mol_(H2)mol_(Cu)^(à1)min^(à1))was achieved at ambient temperature,which is superior to those of previously reported Fe or Cu based systems.展开更多
The preparation of Cu nanoparticles by the aqueous solution reduction method was investigated. The effects of different reaction parameters on the preparation of Cu nanoparticles were studied. The optimum conditions f...The preparation of Cu nanoparticles by the aqueous solution reduction method was investigated. The effects of different reaction parameters on the preparation of Cu nanoparticles were studied. The optimum conditions for preparing well-dispersed nanoparticles were found as follows: 0.4 mol/L NaBH4 was added into solution containing 0.2 mol/L Cu2+, 1.0% gelatin dispersant in mass fraction, and 1.2 mol/L NH3?H2O at pH 12 and 313 K. In addition, a series of experiments were performed to discover the reaction process. NH3?H2O was found to be able to modulate the reaction process. At pH=10, Cu2+ was transformed to Cu(NH3)42+ as precursor after the addition of NH3?H2O, and then Cu(NH3)42+ was reduced by NaBH4 solution. At pH=12, Cu2+ was transformed to Cu(OH)2 as precursor after the addition of NH3?H2O, and Cu(OH)2 was then reduced by NaBH4 solution.展开更多
Cu（OH）2 nanowires were prepared and incorporated into poly（vinylidene fluoride）（PVDF） to fabricate Cu（OH）2-PVDF ultrafiltration（UF） membrane via immersion precipitation phase inversion process. The effect of...Cu（OH）2 nanowires were prepared and incorporated into poly（vinylidene fluoride）（PVDF） to fabricate Cu（OH）2-PVDF ultrafiltration（UF） membrane via immersion precipitation phase inversion process. The effect of Cu（OH）2 nanowires on the morphology of membranes was investigated by X-ray photoelectron spectroscopy（XPS）, Fourier transform infrared（FTIR） spectroscopy, atomic force microscopy（AFM）, scanning electron microscopy（SEM） and X-ray diffraction（XRD） measurements. The results showed that all the Cu（OH）2-PVDF membranes had wider fingerlike pore structure and better hydrophilicity, smoother surface than pristine PVDF membrane due to the incorporation of Cu（OH）2 nanowires. In addition, water flux and bovine serum albumin（BSA） rejection were also measured to investigate the filtration performance of membranes. The results indicated that all the Cu（OH）2-PVDF membranes had high water flux, outstanding BSA rejection and excellent antifouling properties. It is worth mentioning that the optimized performance could be obtained when the Cu（OH）2 nanowires content reached 1.2 wt%. Furthermore, the membrane with 1.2 wt% Cu（OH）2 nanowires showed outstanding oil-water emulsion separation capability.展开更多
In this study, hierarchical copper nano-dendrites （CuNDs） are fabricated via the electrodeposition method. The electrochemical behaviors of the as-obtained hierarchical CuNDs in 0.1 M NaOH aqueous solution are subse...In this study, hierarchical copper nano-dendrites （CuNDs） are fabricated via the electrodeposition method. The electrochemical behaviors of the as-obtained hierarchical CuNDs in 0.1 M NaOH aqueous solution are subsequently studied. The CuNDs experience a non-equilibritrm oxidation process when subjected to cyclic voltammetry （CV） measurements. The first oxidation peak O1 in CV is attributed to the formation of an epitaxial Cu20 layer over the surface of the hierarchical CuNDs. However, the second oxidation peak 02 in CV appears unusually broad across a wide potential range. In this region, the reaction process starts with the nucleation and growth of Cu（OH）2 nanoneedles, followed by the oxidation of Cu20. Upon the increase of potential Cu20 is gradually transformed to CuO and Cu（OH）2, forming a dual-layer structure with high productivity of Cu（OH）2 nanoneedles.展开更多
Cupric hydroxide films with a new hierarchical architecture consisting of beautiful nanotubes and nanoflowers were directly fabricated on copper substrate via a solution-immersion process at a constant temperature of ...Cupric hydroxide films with a new hierarchical architecture consisting of beautiful nanotubes and nanoflowers were directly fabricated on copper substrate via a solution-immersion process at a constant temperature of 23 ℃. Stable superhydrophobic Cu（OH）2 surface was obtained after Cu（OH）2 films were modified with hydrolyzed 1H, 1H, 2H, 2H-perfluorooctyltrichlorosilane （CsH4CI3F13Si, FOTMS）. The surface morphology and composition of the film were studied using scanning electron microscopy （SEM）, X-ray diffraction （XRD）, and X-ray photoelectron spectroscopy （XPS）, respectively. Result shows that the surface of Cu（OH）2 films directly grown on copper substrate was hydrophilic, whereas the modified Cu（OH）2 films exhibited the superhydrophobicity with a water contact angle （CA） of about 160.8°, as well as a small sliding angle （SA） of about 1°. The special hierarchical structure, along with the slow surface energy leads to the high superhydrophobicity of the surface.展开更多
文摘Cu（OH）2 nano-fibers were prepared by chemical precipitation with CuSO4·5H2O and NaOH as raw materials. The Cu（OH）2 nano-fibers have a diameter of 10-30 nm and a length of 1-6 μm. The reaction conditions were as follows： the concentration of CuSO4 solution was 0.1 mol·L^-1,NaOH solution 4 mol·L^-1,the dropping rate of the NaOH solution 50 mL·min^-1,the reaction temperature 20℃the pH value of the reaction terminal 13,and the stirring rate 1200 r·min^-1. The chain nano-CuO grains were obtained through the microwave radiation of the Cu（OH）2 nano-fibers.
基金supported by the Strategic Priority Research Program of the Chinese Academy of Sciences (XDB17000000)the National Natural Science Foundation of China (21773275)
文摘Herein,we first describe the physical mixture of Cu(OH)_2/Fe(OH)_3 as a composite catalyst precursor for the dehydrogenation of ammonia borane(AB)in methanol.During the initial period of catalytic reaction,Cu nanoparticles were formed in-situ.The catalytic activity of Cu nanoparticles can be significantly enhanced with the assistance of Fe species and OH~à.A maximum turnover frequency(TOF)of 50.3 mol_(H2)mol^(à1)_(total metal)min^(à1)(135.6 mol_(H2)mol_(Cu)^(à1)min^(à1))was achieved at ambient temperature,which is superior to those of previously reported Fe or Cu based systems.
文摘The preparation of Cu nanoparticles by the aqueous solution reduction method was investigated. The effects of different reaction parameters on the preparation of Cu nanoparticles were studied. The optimum conditions for preparing well-dispersed nanoparticles were found as follows: 0.4 mol/L NaBH4 was added into solution containing 0.2 mol/L Cu2+, 1.0% gelatin dispersant in mass fraction, and 1.2 mol/L NH3?H2O at pH 12 and 313 K. In addition, a series of experiments were performed to discover the reaction process. NH3?H2O was found to be able to modulate the reaction process. At pH=10, Cu2+ was transformed to Cu(NH3)42+ as precursor after the addition of NH3?H2O, and then Cu(NH3)42+ was reduced by NaBH4 solution. At pH=12, Cu2+ was transformed to Cu(OH)2 as precursor after the addition of NH3?H2O, and Cu(OH)2 was then reduced by NaBH4 solution.
基金financially supported by the Postdoctoral Science Foundation of China (No.2014M560802)the Natural Science Foundation of Education Department of Shaanxi Provincial Government (No.16JK1755)the State Key Laboratory of Chemical Engineering (No.SKL-ChE-16A04)
文摘Cu（OH）2 nanowires were prepared and incorporated into poly（vinylidene fluoride）（PVDF） to fabricate Cu（OH）2-PVDF ultrafiltration（UF） membrane via immersion precipitation phase inversion process. The effect of Cu（OH）2 nanowires on the morphology of membranes was investigated by X-ray photoelectron spectroscopy（XPS）, Fourier transform infrared（FTIR） spectroscopy, atomic force microscopy（AFM）, scanning electron microscopy（SEM） and X-ray diffraction（XRD） measurements. The results showed that all the Cu（OH）2-PVDF membranes had wider fingerlike pore structure and better hydrophilicity, smoother surface than pristine PVDF membrane due to the incorporation of Cu（OH）2 nanowires. In addition, water flux and bovine serum albumin（BSA） rejection were also measured to investigate the filtration performance of membranes. The results indicated that all the Cu（OH）2-PVDF membranes had high water flux, outstanding BSA rejection and excellent antifouling properties. It is worth mentioning that the optimized performance could be obtained when the Cu（OH）2 nanowires content reached 1.2 wt%. Furthermore, the membrane with 1.2 wt% Cu（OH）2 nanowires showed outstanding oil-water emulsion separation capability.
文摘In this study, hierarchical copper nano-dendrites （CuNDs） are fabricated via the electrodeposition method. The electrochemical behaviors of the as-obtained hierarchical CuNDs in 0.1 M NaOH aqueous solution are subsequently studied. The CuNDs experience a non-equilibritrm oxidation process when subjected to cyclic voltammetry （CV） measurements. The first oxidation peak O1 in CV is attributed to the formation of an epitaxial Cu20 layer over the surface of the hierarchical CuNDs. However, the second oxidation peak 02 in CV appears unusually broad across a wide potential range. In this region, the reaction process starts with the nucleation and growth of Cu（OH）2 nanoneedles, followed by the oxidation of Cu20. Upon the increase of potential Cu20 is gradually transformed to CuO and Cu（OH）2, forming a dual-layer structure with high productivity of Cu（OH）2 nanoneedles.
基金Sponsored by the National Natural Science Foundation of China(20773014/B030202)the "111" Project of China(B07012)
文摘Cupric hydroxide films with a new hierarchical architecture consisting of beautiful nanotubes and nanoflowers were directly fabricated on copper substrate via a solution-immersion process at a constant temperature of 23 ℃. Stable superhydrophobic Cu（OH）2 surface was obtained after Cu（OH）2 films were modified with hydrolyzed 1H, 1H, 2H, 2H-perfluorooctyltrichlorosilane （CsH4CI3F13Si, FOTMS）. The surface morphology and composition of the film were studied using scanning electron microscopy （SEM）, X-ray diffraction （XRD）, and X-ray photoelectron spectroscopy （XPS）, respectively. Result shows that the surface of Cu（OH）2 films directly grown on copper substrate was hydrophilic, whereas the modified Cu（OH）2 films exhibited the superhydrophobicity with a water contact angle （CA） of about 160.8°, as well as a small sliding angle （SA） of about 1°. The special hierarchical structure, along with the slow surface energy leads to the high superhydrophobicity of the surface.
