N31-type phosphate laser glasses doped with different concentrations of Cu were prepared. Their optical loss coefficient at 1053 nm wavelength and nonradiative transition rate from the Nd3＋ 4F3/2 state were determine...N31-type phosphate laser glasses doped with different concentrations of Cu were prepared. Their optical loss coefficient at 1053 nm wavelength and nonradiative transition rate from the Nd3＋ 4F3/2 state were determined and analyzed in detail. The optical loss coefficient per unit of Cu2＋ （cm–1/ppmw） and the fluorescence decay rate （Hz/ppmw） caused by Cu2＋ and Nd3＋ interaction were 0.0024 and 7.9, respectively. Cu impurity affected both optical loss at 1053 nm and fluorescent emission of Nd3＋ 4F3/2 state seriously in N31 laser glass.展开更多
In the newly developed oxygen-enriched bottom-blowing copper smelting process(also known as the SKS copper smelting process), Cu loss in slag is one of the most concerning issues. This paper presents our research resu...In the newly developed oxygen-enriched bottom-blowing copper smelting process(also known as the SKS copper smelting process), Cu loss in slag is one of the most concerning issues. This paper presents our research results concerning the relationship between the Cu content of the matte and slag in the SKS process; the results are based on actual industrial production in the Dongying Fangyuan copper smelter. The results show that the matte grade strongly influences Cu losses in slag. The dissolved and entrained losses account for 10%–20% and 80%–90% of the total SKS industrial Cu losses in slag, respectively. With increasing matte grade, the dissolved and entrained Cu losses in the SKS slag both increase continuously. When the matte grade is greater than 68%, the content of Cu in the smelting slag increases much more dramatically. To obtain a high direct recovery of copper, the matte grade should be less than 75% in industrial SKS copper production.展开更多
The corrosion behavior of the Cu-Ti alloys with different Ti contents in 3.5%(mass fraction)NaCl solution was investigated using electrochemical measurements,immersion tests,mass loss measurements and SEM observation....The corrosion behavior of the Cu-Ti alloys with different Ti contents in 3.5%(mass fraction)NaCl solution was investigated using electrochemical measurements,immersion tests,mass loss measurements and SEM observation.The results show that Ti dissolved in the Cu matrix changes the corrosion process of the alloys.Pure Cu sample exhibits a typical active–passive-transpassive corrosion behavior.The anodic polarization current densities of the Cu-Ti alloys steadily increase with increasing applied potential,indicating that active dissolution of copper proceeds due to the potential difference in the galvanic coupling of Cu and Ti.The increase of Ti content decreases the corrosion resistance of the Cu-Ti alloys.展开更多
A series of Cu-substituted Ni_(0.5-x)Cu_xZn_(0.5)Fe_2O_4(x=0.12,0.16,0.20,0.24 and 0.28) spinel ferrites were prepared by conventional ceramic method to investigate the effects of Cu compositional variation on the str...A series of Cu-substituted Ni_(0.5-x)Cu_xZn_(0.5)Fe_2O_4(x=0.12,0.16,0.20,0.24 and 0.28) spinel ferrites were prepared by conventional ceramic method to investigate the effects of Cu compositional variation on the structure and dielectric properties.XRD patterns demonstrate that all the samples are crystallized in single-phase cubic spinel structure and the lattice constant increases with increasing Cu content.White grains observed by SEM are Cu-rich phase.The dielectric constant versus frequency curve displays a normal dielectric behavior of spinel ferrites.While the frequency dependence of dielectric loss tangent is found to be abnormal,exhibiting a peak at certain frequency for all Cu-substituted Ni-Zn ferrites.A maximum of the resistivity is observed at x=0.2 due to the decrease of hopping electrons between Fe^(2+) and Fe^(3+) in per unit volume,which is in contrast with the Cu content dependence of dielectric constant and dielectric loss.展开更多
文摘N31-type phosphate laser glasses doped with different concentrations of Cu were prepared. Their optical loss coefficient at 1053 nm wavelength and nonradiative transition rate from the Nd3＋ 4F3/2 state were determined and analyzed in detail. The optical loss coefficient per unit of Cu2＋ （cm–1/ppmw） and the fluorescence decay rate （Hz/ppmw） caused by Cu2＋ and Nd3＋ interaction were 0.0024 and 7.9, respectively. Cu impurity affected both optical loss at 1053 nm and fluorescent emission of Nd3＋ 4F3/2 state seriously in N31 laser glass.
基金financially supported by the National Natural Science Foundation of China (No. 51620105013)Dongying Fangyuan Nonferrous Metals Co., Ltd.
文摘In the newly developed oxygen-enriched bottom-blowing copper smelting process(also known as the SKS copper smelting process), Cu loss in slag is one of the most concerning issues. This paper presents our research results concerning the relationship between the Cu content of the matte and slag in the SKS process; the results are based on actual industrial production in the Dongying Fangyuan copper smelter. The results show that the matte grade strongly influences Cu losses in slag. The dissolved and entrained losses account for 10%–20% and 80%–90% of the total SKS industrial Cu losses in slag, respectively. With increasing matte grade, the dissolved and entrained Cu losses in the SKS slag both increase continuously. When the matte grade is greater than 68%, the content of Cu in the smelting slag increases much more dramatically. To obtain a high direct recovery of copper, the matte grade should be less than 75% in industrial SKS copper production.
基金Project(51374151)supported by the National Natural Science Foundation of China
文摘The corrosion behavior of the Cu-Ti alloys with different Ti contents in 3.5%(mass fraction)NaCl solution was investigated using electrochemical measurements,immersion tests,mass loss measurements and SEM observation.The results show that Ti dissolved in the Cu matrix changes the corrosion process of the alloys.Pure Cu sample exhibits a typical active–passive-transpassive corrosion behavior.The anodic polarization current densities of the Cu-Ti alloys steadily increase with increasing applied potential,indicating that active dissolution of copper proceeds due to the potential difference in the galvanic coupling of Cu and Ti.The increase of Ti content decreases the corrosion resistance of the Cu-Ti alloys.
基金Project(M26012)supported by the Foundation of National Laboratory of Solid State Microstructures,China
文摘A series of Cu-substituted Ni_(0.5-x)Cu_xZn_(0.5)Fe_2O_4(x=0.12,0.16,0.20,0.24 and 0.28) spinel ferrites were prepared by conventional ceramic method to investigate the effects of Cu compositional variation on the structure and dielectric properties.XRD patterns demonstrate that all the samples are crystallized in single-phase cubic spinel structure and the lattice constant increases with increasing Cu content.White grains observed by SEM are Cu-rich phase.The dielectric constant versus frequency curve displays a normal dielectric behavior of spinel ferrites.While the frequency dependence of dielectric loss tangent is found to be abnormal,exhibiting a peak at certain frequency for all Cu-substituted Ni-Zn ferrites.A maximum of the resistivity is observed at x=0.2 due to the decrease of hopping electrons between Fe^(2+) and Fe^(3+) in per unit volume,which is in contrast with the Cu content dependence of dielectric constant and dielectric loss.
