A power-configurable high performance preamplifier was implemented in standard 180-nm CMOS technology for 12 × 10 Gb/s high-density ultra-high speed parallel optical communication system. With critical limitation...A power-configurable high performance preamplifier was implemented in standard 180-nm CMOS technology for 12 × 10 Gb/s high-density ultra-high speed parallel optical communication system. With critical limitations on power consumption, area and fabrication cost, the preamplifier achieves high performance, e.g. high bandwidth, high trans-impedance gain, low noise and high stability. A novel feed-forward common gate （FCG） stage is adopted to alleviate contradictions on trans-impedance gain and bandwidth by using a low headroom con- suming approach to isolate a large input capacitance and using complex pole peaking techniques to substitute induc- tors to achieve bandwidth extension. A multi-supply power-configurable scheme was employed to avoid wasteful power caused by a pessimistic estimation of process-voltage-temperature （PVT） variation. Two representative sam- ples provide a trans-impedance gain of 53.9 dBf2, a 3-dB bandwidth of 6.8 GHz, a power dissipation of 6.26 mW without power-configuration and a trans-impedance gain of 52.1 dBg2, a 3-dB bandwidth of 8.1 GHz, a power dis- sipation of 6.35 mW with power-configuration, respectively. The measured average input-referred noise-current spectral density is no more than 28 pA/√Hz. The chip area is only 0.08 x 0.08 mm2.展开更多
This article examines the development of the four main renewable energy technologies (RET) in Spain in the latest years: biomass, small hydro (SH), solar photovoltaic (solar PV) and wind. It has been studied the varia...This article examines the development of the four main renewable energy technologies (RET) in Spain in the latest years: biomass, small hydro (SH), solar photovoltaic (solar PV) and wind. It has been studied the variation of the work-ing time per MW installed available from the on line data base of Spanish National Commission on Energy (SNCE), in the national context and in each of the Autonomic Communities (AACC). We have also obtained the marginal cost curve of the global RE. The main conclusions of the study are that Spain is effective meeting the RE generation target but not efficient in costs and in short term it is not any RETs that can achieve competitive price comparing to the elec-trical market.展开更多
Were assessed the effect of five traditional diets backyard turkeys in confinement. The experiment lasted 36 weeks, the turkeys were randomized to one of five diets: kitchen waste + fresh forage (T1), kitchen waste (T...Were assessed the effect of five traditional diets backyard turkeys in confinement. The experiment lasted 36 weeks, the turkeys were randomized to one of five diets: kitchen waste + fresh forage (T1), kitchen waste (T2), commercial feed + fresh forage (T3), cracked corn + fresh forage (T4) and commercial feed (T5). Food and water were provided ad libitum. Each treatment with birds of both sexes had two repetitions with four birds and each bird was considered as an experimental unit. Were evaluated daily weight gain, total weight gain, final live weight, total length peak-tail, monthly gain peak-tail, total length, total length of wings, monthly gain wings length, and feed cost. The data were analyzed in a completely randomized arrangement with adjusted means and Tukey’s mean comparison, then an evaluation of treatment groups by analyzing clusters for semi quantitative data. The biggest daily gain, total weight gain and final live weight was obtained with treatment T3, while the highest increase in peak-length tail and wings was obtained with treatment T1 (P < 0.05). T2 treatment turned out to be most economical, but the treatment that best scores obtained was T1. We conclude that the use of kitchen waste + fresh forage is a feasible strategy to feed slow-growing turkeys.展开更多
The European Union, in an effort to boost the use of Renewable Energy Sources (RES) in power generation, applies supportive tools consisting in financial motivation either as grants or as subsidies. According to welfa...The European Union, in an effort to boost the use of Renewable Energy Sources (RES) in power generation, applies supportive tools consisting in financial motivation either as grants or as subsidies. According to welfare economics, a subsidy should reflect the external benefits;otherwise a distortion of competition takes place. The most widespread method to calculate externalities is the avoided cost approach, despite the fact that it encounters equally all the RES units leading to technological neutrality. In the present article, the avoided cost approach with the objective social justification of RES subsidies/feed in tariffs (FITs) in the case of Greece, for the year 2014, is applied. The results show a high gap between the current FITs and the suggested ones amounting to approximately 40%. This uncomfortable outcome indicates that, at least in the case of Greece, either the level of the current guaranteed tariffs is not socially justified, or the CO2 value derived from the European carbon market does not reflect the real social cost, or that the avoided cost method, alone, is not adequate to explain the level of subsidies. In light of the foregoing, the need for the development of a concrete and integrated methodology for calculating all RES externalities emerges.展开更多
Types of industry are manifold, patterns used in the determination of the cost of production can also vary. Elements of the cost of production are raw materials, direct labor, and factory overhead. Value of raw materi...Types of industry are manifold, patterns used in the determination of the cost of production can also vary. Elements of the cost of production are raw materials, direct labor, and factory overhead. Value of raw materials used in aquaculture industry in particular needs to calculate the cost of feed consumed by fish, thus greatly affect the price of fish feed cost of production. The calculation of the value of raw materials in fish production cost element to consider is the calculation of the value of raw material components, namely, （1） biomass of harvestable fish as the basic multiplication cost of production per kilogram or per fish harvested fish; （2） the ratio of fish feed intake by the amount of fish produced or often called the Feed Conversion Ratio （FCR）; and （3） the average purchase price of feed on fish harvest period is used as the basis for calculating the cost of production as well. This research is applied research that uses data archive aquaculture companies. The results in the observed period, the value FCR is 0.80, which means to fish have been consumed as much as 0.80 kg of fish feed. Biomass of fish that are harvested at 47,399.95 kg or 1,869,647 individuals. The average purchase price of fish feed on the observation period amounted to IDR 4,855.79. So the price of raw materials contained in harvested fish in the observation period calculates the value of multiplying all the components of raw materials （i.e., IDR 184,131,362.57）. Method of calculating the cost of production companies is process method and charging method used is the full costing method.展开更多
基金Project supported by the National Natural Science Foundation of China(No.61106024)the Natural Science Foundation of Jiangsu Provice,China(No.BK2010411)
文摘A power-configurable high performance preamplifier was implemented in standard 180-nm CMOS technology for 12 × 10 Gb/s high-density ultra-high speed parallel optical communication system. With critical limitations on power consumption, area and fabrication cost, the preamplifier achieves high performance, e.g. high bandwidth, high trans-impedance gain, low noise and high stability. A novel feed-forward common gate （FCG） stage is adopted to alleviate contradictions on trans-impedance gain and bandwidth by using a low headroom con- suming approach to isolate a large input capacitance and using complex pole peaking techniques to substitute induc- tors to achieve bandwidth extension. A multi-supply power-configurable scheme was employed to avoid wasteful power caused by a pessimistic estimation of process-voltage-temperature （PVT） variation. Two representative sam- ples provide a trans-impedance gain of 53.9 dBf2, a 3-dB bandwidth of 6.8 GHz, a power dissipation of 6.26 mW without power-configuration and a trans-impedance gain of 52.1 dBg2, a 3-dB bandwidth of 8.1 GHz, a power dis- sipation of 6.35 mW with power-configuration, respectively. The measured average input-referred noise-current spectral density is no more than 28 pA/√Hz. The chip area is only 0.08 x 0.08 mm2.
文摘This article examines the development of the four main renewable energy technologies (RET) in Spain in the latest years: biomass, small hydro (SH), solar photovoltaic (solar PV) and wind. It has been studied the variation of the work-ing time per MW installed available from the on line data base of Spanish National Commission on Energy (SNCE), in the national context and in each of the Autonomic Communities (AACC). We have also obtained the marginal cost curve of the global RE. The main conclusions of the study are that Spain is effective meeting the RE generation target but not efficient in costs and in short term it is not any RETs that can achieve competitive price comparing to the elec-trical market.
文摘Were assessed the effect of five traditional diets backyard turkeys in confinement. The experiment lasted 36 weeks, the turkeys were randomized to one of five diets: kitchen waste + fresh forage (T1), kitchen waste (T2), commercial feed + fresh forage (T3), cracked corn + fresh forage (T4) and commercial feed (T5). Food and water were provided ad libitum. Each treatment with birds of both sexes had two repetitions with four birds and each bird was considered as an experimental unit. Were evaluated daily weight gain, total weight gain, final live weight, total length peak-tail, monthly gain peak-tail, total length, total length of wings, monthly gain wings length, and feed cost. The data were analyzed in a completely randomized arrangement with adjusted means and Tukey’s mean comparison, then an evaluation of treatment groups by analyzing clusters for semi quantitative data. The biggest daily gain, total weight gain and final live weight was obtained with treatment T3, while the highest increase in peak-length tail and wings was obtained with treatment T1 (P < 0.05). T2 treatment turned out to be most economical, but the treatment that best scores obtained was T1. We conclude that the use of kitchen waste + fresh forage is a feasible strategy to feed slow-growing turkeys.
文摘The European Union, in an effort to boost the use of Renewable Energy Sources (RES) in power generation, applies supportive tools consisting in financial motivation either as grants or as subsidies. According to welfare economics, a subsidy should reflect the external benefits;otherwise a distortion of competition takes place. The most widespread method to calculate externalities is the avoided cost approach, despite the fact that it encounters equally all the RES units leading to technological neutrality. In the present article, the avoided cost approach with the objective social justification of RES subsidies/feed in tariffs (FITs) in the case of Greece, for the year 2014, is applied. The results show a high gap between the current FITs and the suggested ones amounting to approximately 40%. This uncomfortable outcome indicates that, at least in the case of Greece, either the level of the current guaranteed tariffs is not socially justified, or the CO2 value derived from the European carbon market does not reflect the real social cost, or that the avoided cost method, alone, is not adequate to explain the level of subsidies. In light of the foregoing, the need for the development of a concrete and integrated methodology for calculating all RES externalities emerges.
文摘Types of industry are manifold, patterns used in the determination of the cost of production can also vary. Elements of the cost of production are raw materials, direct labor, and factory overhead. Value of raw materials used in aquaculture industry in particular needs to calculate the cost of feed consumed by fish, thus greatly affect the price of fish feed cost of production. The calculation of the value of raw materials in fish production cost element to consider is the calculation of the value of raw material components, namely, （1） biomass of harvestable fish as the basic multiplication cost of production per kilogram or per fish harvested fish; （2） the ratio of fish feed intake by the amount of fish produced or often called the Feed Conversion Ratio （FCR）; and （3） the average purchase price of feed on fish harvest period is used as the basis for calculating the cost of production as well. This research is applied research that uses data archive aquaculture companies. The results in the observed period, the value FCR is 0.80, which means to fish have been consumed as much as 0.80 kg of fish feed. Biomass of fish that are harvested at 47,399.95 kg or 1,869,647 individuals. The average purchase price of fish feed on the observation period amounted to IDR 4,855.79. So the price of raw materials contained in harvested fish in the observation period calculates the value of multiplying all the components of raw materials （i.e., IDR 184,131,362.57）. Method of calculating the cost of production companies is process method and charging method used is the full costing method.
