In this paper, an irreversible thermionic refrigerator model based on van der Waals heterostructure with various irreversibilities is established by utilizing combination of non-equilibrium thermodynamics and finite t...In this paper, an irreversible thermionic refrigerator model based on van der Waals heterostructure with various irreversibilities is established by utilizing combination of non-equilibrium thermodynamics and finite time thermodynamics. The basic performance characteristics of the refrigerator are obtained. The effects of key factors, such as bias voltages, Schottky barrier heights and heat leakages, on the performance are studied. Results show that cooling rates and coefficients of performances(COPs) can attain the double maximum with proper modulation of barrier heights and bias voltages. Increasing cross-plane thermal resistance as well as decreasing electrode-reservoir thermal resistance and reservoir-reservoir thermal resistance can enhance the performance of the device. The optimal performance region is the interval between the maximum cooling rate point and the maximum COP point. By modulating the bias voltage, the working state of the device can fall into the optimal performance region. The optimal performance of the refrigerator when using single layer graphene and a few layers graphene as electrode material is also compared.展开更多
The U-Th-40K concentrations of granite are on 1–2 orders of magnitude greater than those of basaltic-ultrabasic rocks. Radiogenic heat of a granitic melt has significant influence on the cooling-crystallization perio...The U-Th-40K concentrations of granite are on 1–2 orders of magnitude greater than those of basaltic-ultrabasic rocks. Radiogenic heat of a granitic melt has significant influence on the cooling-crystallization period of the melt. In this paper we derived a formula to calculate prolongation period (t A) of cooling-crystallization of a granitic melt caused by radiogenic heat. Calculation using this formula and radioactive element concentrations (U=5.31×10?6; Th=23.1×10?6; K=4.55%) for the biotite adamellite of the Jinjiling batholith shows that the t A of the adamellite is 1.4 times of the cooling period of the granitic melt without considering radiogenic heat from the initial temperature (T m=960°C) to crystallization temperature (T c=600°C) of the melt. It has been demonstrated that the radiogenic heat produced in a granitic melt is a key factor influencing the cooling-crystallization process of the granitic melt, and is likely one of the reasons for inconsistence between emplacement ages and crystallization ages of many Meso-Cenozoic granitoids.展开更多
In the paper, the finite element model(FEM) of wire arc additive manufacturing(WAAM) by TIG method was established by the ABAQUS soft, and the phase transformation latent heat was considered in the model. The evolutio...In the paper, the finite element model(FEM) of wire arc additive manufacturing(WAAM) by TIG method was established by the ABAQUS soft, and the phase transformation latent heat was considered in the model. The evolution rules of temperature field at the interlayer with the cooling time of 10 s, 30 s and 50 s were obtained by the model. The WAAM experiment were performed by 5356 aluminum alloy welding wire with φ1.2 mm, and the simulated temperature field were varified by the thermocouple. The result shows that the highest temperature at the molten pool center increases with the increased interlayers at the same interlayer cooling time;the highest temperature drops gradually and the decline is smaller with the increased interlayer cooling time at the same layer. No remelting occurs at the top layer, and at least two remelting times occur in the other layers, resulting in complex temperature field evolution.展开更多
基金supported by the National Natural Science Foundation of China (Grant Nos.51779262, 51576207, 51306206)the Hubei Province Natural Science Foundation of China (Grant No.2017CFB498)。
文摘In this paper, an irreversible thermionic refrigerator model based on van der Waals heterostructure with various irreversibilities is established by utilizing combination of non-equilibrium thermodynamics and finite time thermodynamics. The basic performance characteristics of the refrigerator are obtained. The effects of key factors, such as bias voltages, Schottky barrier heights and heat leakages, on the performance are studied. Results show that cooling rates and coefficients of performances(COPs) can attain the double maximum with proper modulation of barrier heights and bias voltages. Increasing cross-plane thermal resistance as well as decreasing electrode-reservoir thermal resistance and reservoir-reservoir thermal resistance can enhance the performance of the device. The optimal performance region is the interval between the maximum cooling rate point and the maximum COP point. By modulating the bias voltage, the working state of the device can fall into the optimal performance region. The optimal performance of the refrigerator when using single layer graphene and a few layers graphene as electrode material is also compared.
基金Supported by the National Natural Science Foundation of China (Grant Nos. 40372036 and 40221301)
文摘The U-Th-40K concentrations of granite are on 1–2 orders of magnitude greater than those of basaltic-ultrabasic rocks. Radiogenic heat of a granitic melt has significant influence on the cooling-crystallization period of the melt. In this paper we derived a formula to calculate prolongation period (t A) of cooling-crystallization of a granitic melt caused by radiogenic heat. Calculation using this formula and radioactive element concentrations (U=5.31×10?6; Th=23.1×10?6; K=4.55%) for the biotite adamellite of the Jinjiling batholith shows that the t A of the adamellite is 1.4 times of the cooling period of the granitic melt without considering radiogenic heat from the initial temperature (T m=960°C) to crystallization temperature (T c=600°C) of the melt. It has been demonstrated that the radiogenic heat produced in a granitic melt is a key factor influencing the cooling-crystallization process of the granitic melt, and is likely one of the reasons for inconsistence between emplacement ages and crystallization ages of many Meso-Cenozoic granitoids.
基金This work was supported by the National Natural Science Foundation of China(Grant No.51905423)Natural.Science Basic Research Plan in Shaanxi Province of China(Grant No.2021JM338)+1 种基金China Scholarship Council(Grant No.201908610042)Application Technology R&D Project of Beilin District(GX2102).
文摘In the paper, the finite element model(FEM) of wire arc additive manufacturing(WAAM) by TIG method was established by the ABAQUS soft, and the phase transformation latent heat was considered in the model. The evolution rules of temperature field at the interlayer with the cooling time of 10 s, 30 s and 50 s were obtained by the model. The WAAM experiment were performed by 5356 aluminum alloy welding wire with φ1.2 mm, and the simulated temperature field were varified by the thermocouple. The result shows that the highest temperature at the molten pool center increases with the increased interlayers at the same interlayer cooling time;the highest temperature drops gradually and the decline is smaller with the increased interlayer cooling time at the same layer. No remelting occurs at the top layer, and at least two remelting times occur in the other layers, resulting in complex temperature field evolution.
