Integrating solar power utilization systems with coal-fired power units, the solar aided coal-fired power generation (SACPG) shows a significant prospect for the large-scale utilization of solar energy and energy savi...Integrating solar power utilization systems with coal-fired power units, the solar aided coal-fired power generation (SACPG) shows a significant prospect for the large-scale utilization of solar energy and energy saving of thermal power units. The methods and mechanism of system integration were studied. The parabolic trough solar collectors were used to collect solar energy and the integration scheme of SACPG system was determined considering the matching of working fluid flows and energy flows. The thermodynamic characteristics of solar thermal power generation and their effects on the performance of thermal power units were studied, and based on this the integration and optimization model of system structure and parameters were built up. The integration rules and coupling mecha- nism of SACPG systems were summarized in accordance with simulation results. The economic analysis of this SACPG system showed that the solar LEC of a typical SACPG system, considering CO2 avoidance, is 0.098 $/kW·h, lower than that of SEGS, 0.14 $/kW·h.展开更多
Wet removal of NO from coal-fired flue gas by UV/H2O2 Advanced Oxidation Process (AOP) were investigated in a self-designed UV-bubble reactor. Several main influencing factors (UV intensity, H2O2 initial concentration...Wet removal of NO from coal-fired flue gas by UV/H2O2 Advanced Oxidation Process (AOP) were investigated in a self-designed UV-bubble reactor. Several main influencing factors (UV intensity, H2O2 initial concentration, initial pH value, solution temperature, NO initial concentration, liquid-gas ratio and O2 percentage content) on the NO removal efficiency were studied. The results showed that UV intensity, H2O2 initial concentration, NO initial concentration and liquid-gas ratio are the main influencing factors. In the best conditions, the highest NO removal efficiency by UV/H2O2 advanced oxidation process could reach 82.9%. Based on the experimental study, the influencing mechanism of the relevant influencing factors were discussed in depth.展开更多
Chinese utilities as well as those worldwide are facing increased demand for additional electricity, reduced plant emissions and greater efficiency. To meet this challenge will require increasing boiler temperature, p...Chinese utilities as well as those worldwide are facing increased demand for additional electricity, reduced plant emissions and greater efficiency. To meet this challenge will require increasing boiler temperature, pressure and coal ash corrosion resistance of the materials of boiler construction of future coal-fired boilers. A new nickel-based tube alloy, INCONEL^R alloy 740, is described aiming at meeting this challenge. Emphasis will be on describing the alloy＇ s mechanical properties, coal-ash and steam corrosion resistance. Microstructural stability as a function of temperature and time is addressed as well as some of the early methodology em- ployed to arrive at the current chemical composition.展开更多
China’s energy dependents on coal due to the abundance and low cost of coal.Coal provides a secure and stable energy source in China.Over-dependence on coal results in the emission of Hazardous Trace Elements(HTEs)in...China’s energy dependents on coal due to the abundance and low cost of coal.Coal provides a secure and stable energy source in China.Over-dependence on coal results in the emission of Hazardous Trace Elements(HTEs)including selenium(Se),mercury(Hg),lead(Pb),arsenic(As),etc.,from Coal-Fired Power Plants(CFPPs),which are the major toxic air pollutants causing widespread concern.For this reason,it is essential to provide a succinct analysis of the main HTEs emission control techniques while concurrently identifying the research prospects framework and specifying future research directions.The study herein reviews various techniques applied in China for the selected HTEs emission control,including the technical,institutional,policy,and regulatory aspects.The specific areas covered in this study include health effects,future coal production and consumption,the current situation of HTEs in Chinese coal,the chemistry of selected HTEs,control techniques,policies,and action plans safeguarding the emission control.The review emphasizes the fact that China must establish and promote efficient and clean ways to utilize coal in order to realize sustainable development.The principal conclusion is that cleaning coal technologies and fuel substitution should be great potential HTEs control technologies in China.Future research should focus on the simultaneous removal of HTEs,PM,SOx,and NOx in the complex flue gas.展开更多
This study investigated the influence of precipitators and wet flue gas desulfurization equipment on characteristics of PM_(2.5)emission from coal-fired power stations.We measured size distribution and removal efficie...This study investigated the influence of precipitators and wet flue gas desulfurization equipment on characteristics of PM_(2.5)emission from coal-fired power stations.We measured size distribution and removal efficiencies,including hybrid electrostatic precipitator/bag filters(ESP/BAGs)which have rarely been studied.A bimodal distribution of particle concentrations was observed at the inlet of each precipitator.After the precipitators,particle concentrations were significantly reduced.Although a bimodal distribution was still observed,all peak positions shifted to the smaller end.The removal efficiencies of hybrid ESP/BAGs reached 99%for PM_(2.5),which is considerably higher than those for other types of precipitators.In particular,the influence of hybrid ESP/BAG operating conditions on the performance of dust removal was explored.The efficiency of hybrid ESP/BAGs decreased by 1.9%when the first electrostatic field was shut down.The concentrations and distributions of particulate matter were also measured in three coal-fired power plants before and after desulfurization devices.The results showed diverse removal efficiencies for different desulfurization towers.The reason for the difference requires further research.We estimated the influence of removal technology for particulate matter on total emissions in China.Substituting ESPs with hybrid ESP/BAGs could reduce the total emissions to 104.3 thousand tons,with 47.48 thousand tons of PM_(2.5).展开更多
Coal combustion and mercury pollution are closely linked, and this relationship is particularly relevant in China, the world＇s largest coal consumer. This paper begins with a summary of recent China-specific studies ...Coal combustion and mercury pollution are closely linked, and this relationship is particularly relevant in China, the world＇s largest coal consumer. This paper begins with a summary of recent China-specific studies on mercury removal by air pollution control technologies and then provides an economic analysis of mercury abatement from these emission control technologies at coal-fired power plants in China. This includes a cost-effectiveness analysis at the enterprise and sector level in China using 2010 as a baseline and projecting out to 2020 and2030. Of the control technologies evaluated, the most cost-effective is a fabric filter installed upstream of the wet flue gas desulfurization system（FF ＋ WFGD）. Halogen injection（HI） is also a cost-effective mercury-specific control strategy, although it has not yet reached commercial maturity. The sector-level analysis shows that 193 tons of mercury was removed in 2010 in China＇s coal-fired power sector, with annualized mercury emission control costs of 2.7 billion Chinese Yuan. Under a projected 2030 Emission Control（EC） scenario with stringent mercury limits compared to Business As Usual（BAU） scenario, the increase of selective catalytic reduction systems（SCR） and the use of HI could contribute to 39 tons of mercury removal at a cost of 3.8 billion CNY. The economic analysis presented in this paper offers insights on air pollution control technologies and practices for enhancing atmospheric mercury control that can aid decision-making in policy design and private-sector investments.展开更多
Particulate pollution is main kind of atmospheric pollution.The fine particles are seriously harmful to human health and environment.Acoustic agglomeration is considered as a promising pretreatment technology for fine...Particulate pollution is main kind of atmospheric pollution.The fine particles are seriously harmful to human health and environment.Acoustic agglomeration is considered as a promising pretreatment technology for fine particle agglomeration.The mechanisms of acoustic agglomeration are very complex and the agglomeration efficiency is affected by many factors.The most important and controversial factor is frequency.Comparative studies between high-frequency and low-frequency sound source to agglomerate coal- fired fly ash were carried out to investigate the influence of frequency on agglomeration efficiency.Acoustic agglomeration theoretical analysis,experimental particle size distributions （PSDs） and orthogonal design were examined.The results showed that the 20 kHz high-frequency sound source was not suitable to agglomerate coal-fired fly ash.Only within the size ranging from 0.2 to 0.25 μm the particles agglomerated to adhere together,and the agglomerated particles were smaller than 2.5 μm.The application of low-frequency （1000–1800 Hz） sound source was proved as an advisable pretreatment with the highest agglomeration efficiency of 75.3%,and all the number concentrations within the measuring range decreased.Orthogonal design L16 （4） 3 was introduced to determine the optimum frequency and optimize acoustic agglomeration condition.According to the results of orthogonal analysis,frequency was the dominant factor of coal-fired fly ash acoustic agglomeration and the optimum frequency was 1400 Hz.展开更多
Using supercritical carbon dioxide(S-CO2)Brayton cycle instead of the traditional steam Rankine cycle is a promising technique to enhance the coal-fired power generation efficiency.Researchers from all over the world ...Using supercritical carbon dioxide(S-CO2)Brayton cycle instead of the traditional steam Rankine cycle is a promising technique to enhance the coal-fired power generation efficiency.Researchers from all over the world are actively designing and exploring efficient S-CO2 coal-fired power plants in recent years with great efforts made to overcome the significant technical challenges in the cycle layouts of S-CO2 and its specific thermal integration with coal-fired heat resources.This paper provides a detailed review of the research progress on the coal-fired power generation using S-CO2 Brayton cycles.The basic knowledge of S-CO2 properties,the promising S-CO2 power cycles and the conceptual designs for S-CO2 coal-fired power plants are comprehensively summarized,with some key issues in the constructing process and the corresponding engineering solutions being emphatically discussed.Based on the current achievements,the overall technical and economic evaluations on the S-CO2 coal-fired power system are figured out.Furthermore,the specific integration applications of S-CO2 cycles with different coal firing devices and modes including pulverized coal combustion,circulating fluidized bed combustion,oxy-coal combustion,pressurized fluidized bed combustion,chemical looping combustion are discussed.Finally,the main challenges requiring further studies are highlighted.展开更多
基金Supported by the National Natural Science Foundation of China (Grant Nos. 50776028 and 50606010) the Program for New Century Excellent Talents in University (Grant No. NCET-05-0217)
文摘Integrating solar power utilization systems with coal-fired power units, the solar aided coal-fired power generation (SACPG) shows a significant prospect for the large-scale utilization of solar energy and energy saving of thermal power units. The methods and mechanism of system integration were studied. The parabolic trough solar collectors were used to collect solar energy and the integration scheme of SACPG system was determined considering the matching of working fluid flows and energy flows. The thermodynamic characteristics of solar thermal power generation and their effects on the performance of thermal power units were studied, and based on this the integration and optimization model of system structure and parameters were built up. The integration rules and coupling mecha- nism of SACPG systems were summarized in accordance with simulation results. The economic analysis of this SACPG system showed that the solar LEC of a typical SACPG system, considering CO2 avoidance, is 0.098 $/kW·h, lower than that of SEGS, 0.14 $/kW·h.
基金supported by the National Natural Science Foundation of China (Grant No. 50721140649)
文摘Wet removal of NO from coal-fired flue gas by UV/H2O2 Advanced Oxidation Process (AOP) were investigated in a self-designed UV-bubble reactor. Several main influencing factors (UV intensity, H2O2 initial concentration, initial pH value, solution temperature, NO initial concentration, liquid-gas ratio and O2 percentage content) on the NO removal efficiency were studied. The results showed that UV intensity, H2O2 initial concentration, NO initial concentration and liquid-gas ratio are the main influencing factors. In the best conditions, the highest NO removal efficiency by UV/H2O2 advanced oxidation process could reach 82.9%. Based on the experimental study, the influencing mechanism of the relevant influencing factors were discussed in depth.
文摘Chinese utilities as well as those worldwide are facing increased demand for additional electricity, reduced plant emissions and greater efficiency. To meet this challenge will require increasing boiler temperature, pressure and coal ash corrosion resistance of the materials of boiler construction of future coal-fired boilers. A new nickel-based tube alloy, INCONEL^R alloy 740, is described aiming at meeting this challenge. Emphasis will be on describing the alloy＇ s mechanical properties, coal-ash and steam corrosion resistance. Microstructural stability as a function of temperature and time is addressed as well as some of the early methodology em- ployed to arrive at the current chemical composition.
基金financial support of National Key Research&Development Project of China(2018YFB0605101)National Natural Science Foundation of China(No.201706050)+1 种基金Key Project Natural Science Foundation of Tianjin(18JCZDJC39800)The Science and Technology Key Project of Tianjin(18ZXSZSF00040,18KPXMSF00080,18PTZWHZ00010)。
文摘China’s energy dependents on coal due to the abundance and low cost of coal.Coal provides a secure and stable energy source in China.Over-dependence on coal results in the emission of Hazardous Trace Elements(HTEs)including selenium(Se),mercury(Hg),lead(Pb),arsenic(As),etc.,from Coal-Fired Power Plants(CFPPs),which are the major toxic air pollutants causing widespread concern.For this reason,it is essential to provide a succinct analysis of the main HTEs emission control techniques while concurrently identifying the research prospects framework and specifying future research directions.The study herein reviews various techniques applied in China for the selected HTEs emission control,including the technical,institutional,policy,and regulatory aspects.The specific areas covered in this study include health effects,future coal production and consumption,the current situation of HTEs in Chinese coal,the chemistry of selected HTEs,control techniques,policies,and action plans safeguarding the emission control.The review emphasizes the fact that China must establish and promote efficient and clean ways to utilize coal in order to realize sustainable development.The principal conclusion is that cleaning coal technologies and fuel substitution should be great potential HTEs control technologies in China.Future research should focus on the simultaneous removal of HTEs,PM,SOx,and NOx in the complex flue gas.
基金Supported by the National Basic Research Pro-gram of China(973 Program)(2013CB228506).
文摘This study investigated the influence of precipitators and wet flue gas desulfurization equipment on characteristics of PM_(2.5)emission from coal-fired power stations.We measured size distribution and removal efficiencies,including hybrid electrostatic precipitator/bag filters(ESP/BAGs)which have rarely been studied.A bimodal distribution of particle concentrations was observed at the inlet of each precipitator.After the precipitators,particle concentrations were significantly reduced.Although a bimodal distribution was still observed,all peak positions shifted to the smaller end.The removal efficiencies of hybrid ESP/BAGs reached 99%for PM_(2.5),which is considerably higher than those for other types of precipitators.In particular,the influence of hybrid ESP/BAG operating conditions on the performance of dust removal was explored.The efficiency of hybrid ESP/BAGs decreased by 1.9%when the first electrostatic field was shut down.The concentrations and distributions of particulate matter were also measured in three coal-fired power plants before and after desulfurization devices.The results showed diverse removal efficiencies for different desulfurization towers.The reason for the difference requires further research.We estimated the influence of removal technology for particulate matter on total emissions in China.Substituting ESPs with hybrid ESP/BAGs could reduce the total emissions to 104.3 thousand tons,with 47.48 thousand tons of PM_(2.5).
基金sponsored by the Major State Basic Research Development Program of China (973 Program) (No. 2013CB430001)the National Natural Science Foundation of China (No. 21307070)+1 种基金the MEP's Special Funds for Research on Public Welfares (201209015)the Sino-Norwegian cooperation project (SINOMER Ⅲ)
文摘Coal combustion and mercury pollution are closely linked, and this relationship is particularly relevant in China, the world＇s largest coal consumer. This paper begins with a summary of recent China-specific studies on mercury removal by air pollution control technologies and then provides an economic analysis of mercury abatement from these emission control technologies at coal-fired power plants in China. This includes a cost-effectiveness analysis at the enterprise and sector level in China using 2010 as a baseline and projecting out to 2020 and2030. Of the control technologies evaluated, the most cost-effective is a fabric filter installed upstream of the wet flue gas desulfurization system（FF ＋ WFGD）. Halogen injection（HI） is also a cost-effective mercury-specific control strategy, although it has not yet reached commercial maturity. The sector-level analysis shows that 193 tons of mercury was removed in 2010 in China＇s coal-fired power sector, with annualized mercury emission control costs of 2.7 billion Chinese Yuan. Under a projected 2030 Emission Control（EC） scenario with stringent mercury limits compared to Business As Usual（BAU） scenario, the increase of selective catalytic reduction systems（SCR） and the use of HI could contribute to 39 tons of mercury removal at a cost of 3.8 billion CNY. The economic analysis presented in this paper offers insights on air pollution control technologies and practices for enhancing atmospheric mercury control that can aid decision-making in policy design and private-sector investments.
基金supported by the National Basic Re-search Program (973) of China(No.2010CB227001)the National Natural Science Foundation of China(No.50576083)+1 种基金the Program New Century Excellent Talents University(No.NCET-04-0533)the Zhejiang Provin-cial Natural Science Foundation of China(No.Y1100299)
文摘Particulate pollution is main kind of atmospheric pollution.The fine particles are seriously harmful to human health and environment.Acoustic agglomeration is considered as a promising pretreatment technology for fine particle agglomeration.The mechanisms of acoustic agglomeration are very complex and the agglomeration efficiency is affected by many factors.The most important and controversial factor is frequency.Comparative studies between high-frequency and low-frequency sound source to agglomerate coal- fired fly ash were carried out to investigate the influence of frequency on agglomeration efficiency.Acoustic agglomeration theoretical analysis,experimental particle size distributions （PSDs） and orthogonal design were examined.The results showed that the 20 kHz high-frequency sound source was not suitable to agglomerate coal-fired fly ash.Only within the size ranging from 0.2 to 0.25 μm the particles agglomerated to adhere together,and the agglomerated particles were smaller than 2.5 μm.The application of low-frequency （1000–1800 Hz） sound source was proved as an advisable pretreatment with the highest agglomeration efficiency of 75.3%,and all the number concentrations within the measuring range decreased.Orthogonal design L16 （4） 3 was introduced to determine the optimum frequency and optimize acoustic agglomeration condition.According to the results of orthogonal analysis,frequency was the dominant factor of coal-fired fly ash acoustic agglomeration and the optimum frequency was 1400 Hz.
基金Financial support from the National Key Research and Development Program of China(No.2017YFB0601802)Key Research and Development Program of Jiangsu Province(No.BE2017159)。
文摘Using supercritical carbon dioxide(S-CO2)Brayton cycle instead of the traditional steam Rankine cycle is a promising technique to enhance the coal-fired power generation efficiency.Researchers from all over the world are actively designing and exploring efficient S-CO2 coal-fired power plants in recent years with great efforts made to overcome the significant technical challenges in the cycle layouts of S-CO2 and its specific thermal integration with coal-fired heat resources.This paper provides a detailed review of the research progress on the coal-fired power generation using S-CO2 Brayton cycles.The basic knowledge of S-CO2 properties,the promising S-CO2 power cycles and the conceptual designs for S-CO2 coal-fired power plants are comprehensively summarized,with some key issues in the constructing process and the corresponding engineering solutions being emphatically discussed.Based on the current achievements,the overall technical and economic evaluations on the S-CO2 coal-fired power system are figured out.Furthermore,the specific integration applications of S-CO2 cycles with different coal firing devices and modes including pulverized coal combustion,circulating fluidized bed combustion,oxy-coal combustion,pressurized fluidized bed combustion,chemical looping combustion are discussed.Finally,the main challenges requiring further studies are highlighted.
