Anisotropic CeCo4.325_xCuo.675Fex （x ： 0.475- 0.875） sintered magnets were prepared by traditional powder metallurgical method. Influence of ball-nfilling time and iron content on microstructure and magnetic proper...Anisotropic CeCo4.325_xCuo.675Fex （x ： 0.475- 0.875） sintered magnets were prepared by traditional powder metallurgical method. Influence of ball-nfilling time and iron content on microstructure and magnetic properties of the CeCo4,325-xCuo.675Fex sintered magnets were investigated. It is shown that the properties of the magnet produced by mag- netic powders ball-milled for 40 min are better than that for 30 rain. With iron content increasing, remanence Br and maxi- mum energy product （BH）m increase first and then decrease. The optimal magnetic properties are obtained for the CeCo3.65Cuo.675Feo.675 sintered magnet： Br=0.685 T, the intrinsic coercivity Hci = 350 kA.m-1, and （BH）m ： 85.6 kJ.m-3. The increase of Br is mainly influenced by iron content of 1：5 matrix which can properly increase the saturation induction Bs; the rapid increase of the amount of Ce-rich phase and 5：19 phase gives rise to the deterioration of the magnets when x ≥ 0.775.展开更多
The composites of Ce-Co-based alloys doped with La content were fabricated via a vacuum arc melting method.The influences of La addition on microstructure,electromagnetic parameters,magnetic property and microwave abs...The composites of Ce-Co-based alloys doped with La content were fabricated via a vacuum arc melting method.The influences of La addition on microstructure,electromagnetic parameters,magnetic property and microwave absorbing property were measured by the corresponding equipment.The morphology characteristics manifest that all samples display sheet structure,and the average particle size of alloy powders increases with increasing La content The saturation magnetization(MS) decreases with increasing La addition as a whole.The minimum reflection loss(RL) of La0.4Ce1.6Co17 alloy powder about-42.29 dB can be obtained about-42.29 dB at 7.84 GHz with the matching thickness of 1.8 mm,and the corresponding effective bandwidth can achieve about 2.24 GHz.In addition,the minimum RL frequency moves towards a lower frequency region as the La content increases.The minimum RL of La0.3Ce1.7Co17alloy powder is less than-20 dB ranging from 1.2 to 2.4 mm in the whole 4-16 GHz.The maximum bandwidth can reach about 4.88 GHz at the given thickness of 1.2 mm.In general,these all indicate that the La addition is beneficial to improving the microwave absorbing performance in both effective bandwidth and absorption intensity.展开更多
基金financially supported by the National High-Tech R&D Program of China(No.2010AA03A401)the National Basic Research Program of China(No.2010CB934601)the National Nature Science Foundation of China(Nos.50931001and 51241009)
文摘Anisotropic CeCo4.325_xCuo.675Fex （x ： 0.475- 0.875） sintered magnets were prepared by traditional powder metallurgical method. Influence of ball-nfilling time and iron content on microstructure and magnetic properties of the CeCo4,325-xCuo.675Fex sintered magnets were investigated. It is shown that the properties of the magnet produced by mag- netic powders ball-milled for 40 min are better than that for 30 rain. With iron content increasing, remanence Br and maxi- mum energy product （BH）m increase first and then decrease. The optimal magnetic properties are obtained for the CeCo3.65Cuo.675Feo.675 sintered magnet： Br=0.685 T, the intrinsic coercivity Hci = 350 kA.m-1, and （BH）m ： 85.6 kJ.m-3. The increase of Br is mainly influenced by iron content of 1：5 matrix which can properly increase the saturation induction Bs; the rapid increase of the amount of Ce-rich phase and 5：19 phase gives rise to the deterioration of the magnets when x ≥ 0.775.
基金Project supported by the National Natural Science Foundation of China (51361007)2017 Director Fund of Guangxi Key Laboratory of Wireless Wideband Communication and Signal Processing (GXKL06170107)。
文摘The composites of Ce-Co-based alloys doped with La content were fabricated via a vacuum arc melting method.The influences of La addition on microstructure,electromagnetic parameters,magnetic property and microwave absorbing property were measured by the corresponding equipment.The morphology characteristics manifest that all samples display sheet structure,and the average particle size of alloy powders increases with increasing La content The saturation magnetization(MS) decreases with increasing La addition as a whole.The minimum reflection loss(RL) of La0.4Ce1.6Co17 alloy powder about-42.29 dB can be obtained about-42.29 dB at 7.84 GHz with the matching thickness of 1.8 mm,and the corresponding effective bandwidth can achieve about 2.24 GHz.In addition,the minimum RL frequency moves towards a lower frequency region as the La content increases.The minimum RL of La0.3Ce1.7Co17alloy powder is less than-20 dB ranging from 1.2 to 2.4 mm in the whole 4-16 GHz.The maximum bandwidth can reach about 4.88 GHz at the given thickness of 1.2 mm.In general,these all indicate that the La addition is beneficial to improving the microwave absorbing performance in both effective bandwidth and absorption intensity.
