Characteristics of wheel-rail dynamic interaction due to the rail corrugation in a high-speed railway are analyzed based on the theory of vehicle-track coupled dynamics in this paper.Influences of the corrugation wave...Characteristics of wheel-rail dynamic interaction due to the rail corrugation in a high-speed railway are analyzed based on the theory of vehicle-track coupled dynamics in this paper.Influences of the corrugation wavelength and depth on the wheel-rail dynamic performance are investigated.The results show that,under the excitation of a measured rail corrugation,the wheel-rail dynamic interaction of high-speed railway is enhanced obviously,and the high-frequency dynamic force between wheel and rail is generated,which has an obvious impact on the vibrations of the wheelset and rail,and little effect on the vibration of the frame and carbody.If the corrugation wavelength is shorter than the sensitive wavelength,the wheel-rail vertical force will increase with the growth of the corrugation wavelength,otherwise,it will decrease.However,the wheel-rail vertical force keeps increasing with the growth of corrugation depth.Furthermore,if the corrugation wavelength is shorter than the sensitive wavelength,the wheel-rail vertical force will increase with the decrease of the running speed,otherwise,it will decrease.It is also found that the critical wavelength of corrugation increases with the growth of the corrugation depth and the running speed,and the critical depth of corrugation is nonlinearly related to the sensitive wavelength.展开更多
The effects of corrugation and wing planform （shape and aspect ratio） on the aerodynamic force production of model insect wings in sweeping （rotating after an initial start） motion at Reynolds number 200 and 3500 ...The effects of corrugation and wing planform （shape and aspect ratio） on the aerodynamic force production of model insect wings in sweeping （rotating after an initial start） motion at Reynolds number 200 and 3500 at angle of attack 40℃ are investigated, using the method of computational fluid dynamics. A representative wing corrugation is considered. Wing-shape and aspect ratio （AR） of ten representative insect wings are considered; they are the wings of fruit fly, cranefly, dronefly, hoverfly, ladybird, bumblebee, honeybee, lacewing （forewing）, hawkmoth and dragon- fly （forewing）, respectively （AR of these wings varies greatly, from 2.84 to 5.45）. The following facts are shown. （1） The corrugated and flat-plate wings produce approximately the same aerodynamic forces. This is because for a sweeping wing at large angle of attack, the length scale of the corrugation is much smaller than the size of the separated flow region or the size of the leading edge vortex （LEV）. （2） The variation in wing shape can have considerable effects on the aerodynamic force; but it has only minor effects on the force coefficients when the velocity at r2 （the radius of the second ：moment of wing area） is used as the reference velocity; i.e. the force coefficients are almost unaffected by the variation in wing shape. （3） The effects of AR are remarkably small： whenAR increases from 2.8 to 5.5, the force coefficients vary only slightly; flowfield results show that when AR is relatively large, the part of the LEV on the outer part of the wings sheds during the sweeping motion. As AR is increased, on one hand, the force coefficients will be increased due to the reduction of 3-dimensional flow effects; on the other hand, they will be decreased due to the shedding of part of the LEV; these two effects approximately cancel each other, resulting in only minor change of the force coefficients.展开更多
The effect of rail corrugation on the vertical dynamics of railway vehicle coupled with a curved track is investigated in detail with a numerical method when a wheelset is steadily curving. In the calculation of rail ...The effect of rail corrugation on the vertical dynamics of railway vehicle coupled with a curved track is investigated in detail with a numerical method when a wheelset is steadily curving. In the calculation of rail corrugation we consider the combination of Kalkers rolling contact theory modified, a model of material loss on rail running surface, and a dynamics model of railway vehicle coupled with a curved track. In the establishment of the dynamic model, for simplicity, one fourth of the freight car without lateral motions, namely a wheelset and the equivalent one fourth freight car body above it, is considered. The Euler beam is used to model the rails and the track structure under the rails is replaced with equivalent springs, dampers and mass bodies. The numerical results show the great influence of the rail corrugation on the vibration of the parts of the vehicle and the track, and the some characters of rail corrugation in development.展开更多
We have examined the aerodynamic effects of corrugation in model wings that closely mimic the wing movements of a forward flight bumblebee using the method of computational fluid dynamics. Various corrugated wing mode...We have examined the aerodynamic effects of corrugation in model wings that closely mimic the wing movements of a forward flight bumblebee using the method of computational fluid dynamics. Various corrugated wing models were tested （care was taken to ensure that the corrugation introduced zero camber）. Advance ratio ranging from 0 to 0.57 was considered. The results shown that at all flight speeds considered, the time courses of aerodynamic force of the corrugated wing are very close to those of the flat-plate wing. The cornlgation decreases aerodynamic force slightly. The changes in the mean location of center of pressure in the spanwise and chordwise directions resulting from the corrugation are no more than 3% of the wing chord length. The possible reason for the small aerodynamic effects of wing corrugation is that the wing operates at a large angle of attack and the flow is separated： the large angle of incidence dominates the corrugation in determining the flow around the wing, and for separated flow, the flow is much less sensitive to wing shape variation.展开更多
The current research of rail corrugation mainly focuses on the mechanisms of its formation and development. Compared with the root causes and development mechanisms, the wheel-rail impacts, the fatigue failure of vehi...The current research of rail corrugation mainly focuses on the mechanisms of its formation and development. Compared with the root causes and development mechanisms, the wheel-rail impacts, the fatigue failure of vehicle-track parts, and the loss of ride comfort due to rail corrugation should also be taken into account. However, the influences of rail corrugation on vehicle and track vibration, and failure of vehicle and track structural parts are barely discussed in the literature. This paper presents an experimental and numerical investigation of the structural vibration of metro bogies caused by rail corrugation. Extensive experiments are conducted to investigate the effects of short-pitch rail corrugation on the vibration accelerations of metro bogies. A dynamic model of a metro vehicle coupled with a concrete track is established to study the influence of rail corrugation on the structural vibration of metro bogies. The field test results indicate that the short-pitch rail corrugation generates strong vibrations on the axle-boxes and the bogie frames, therefore, accelerates the fatigue failure of the bogie components. The numerical results show that short-pitch rail corrugation may largely reduce the fatigue life of the coil spring, and improving the damping value of the primary vertical dampers is likely to reduce the strong vibration induced by short-pitch rail corrugation. This research systematically studies the effect of rail corrugation on the vibration of metro bogies and proposes some remedies for mitigating strong vibrations of metro bogies and reducing the incidence of failure in primary coil springs, which would be helpful in developing new metro bogies and track maintenance procedures.展开更多
基金supported by the National Basic Research Program of China("973"Project)(Grant Nos.2013CB036206,2013CB036205)the National Natural Science Foundation of China(Grant No.61134002)
文摘Characteristics of wheel-rail dynamic interaction due to the rail corrugation in a high-speed railway are analyzed based on the theory of vehicle-track coupled dynamics in this paper.Influences of the corrugation wavelength and depth on the wheel-rail dynamic performance are investigated.The results show that,under the excitation of a measured rail corrugation,the wheel-rail dynamic interaction of high-speed railway is enhanced obviously,and the high-frequency dynamic force between wheel and rail is generated,which has an obvious impact on the vibrations of the wheelset and rail,and little effect on the vibration of the frame and carbody.If the corrugation wavelength is shorter than the sensitive wavelength,the wheel-rail vertical force will increase with the growth of the corrugation wavelength,otherwise,it will decrease.However,the wheel-rail vertical force keeps increasing with the growth of corrugation depth.Furthermore,if the corrugation wavelength is shorter than the sensitive wavelength,the wheel-rail vertical force will increase with the decrease of the running speed,otherwise,it will decrease.It is also found that the critical wavelength of corrugation increases with the growth of the corrugation depth and the running speed,and the critical depth of corrugation is nonlinearly related to the sensitive wavelength.
基金The project supported by the National Natural Science Foundation of China(10232010 and 10472008)Ph.D.Student Foundation of Chinese Ministry of Education(20030006022)
文摘The effects of corrugation and wing planform （shape and aspect ratio） on the aerodynamic force production of model insect wings in sweeping （rotating after an initial start） motion at Reynolds number 200 and 3500 at angle of attack 40℃ are investigated, using the method of computational fluid dynamics. A representative wing corrugation is considered. Wing-shape and aspect ratio （AR） of ten representative insect wings are considered; they are the wings of fruit fly, cranefly, dronefly, hoverfly, ladybird, bumblebee, honeybee, lacewing （forewing）, hawkmoth and dragon- fly （forewing）, respectively （AR of these wings varies greatly, from 2.84 to 5.45）. The following facts are shown. （1） The corrugated and flat-plate wings produce approximately the same aerodynamic forces. This is because for a sweeping wing at large angle of attack, the length scale of the corrugation is much smaller than the size of the separated flow region or the size of the leading edge vortex （LEV）. （2） The variation in wing shape can have considerable effects on the aerodynamic force; but it has only minor effects on the force coefficients when the velocity at r2 （the radius of the second ：moment of wing area） is used as the reference velocity; i.e. the force coefficients are almost unaffected by the variation in wing shape. （3） The effects of AR are remarkably small： whenAR increases from 2.8 to 5.5, the force coefficients vary only slightly; flowfield results show that when AR is relatively large, the part of the LEV on the outer part of the wings sheds during the sweeping motion. As AR is increased, on one hand, the force coefficients will be increased due to the reduction of 3-dimensional flow effects; on the other hand, they will be decreased due to the shedding of part of the LEV; these two effects approximately cancel each other, resulting in only minor change of the force coefficients.
基金The project supported by the National Natural Science Foundation of China(59935100)the Foundation of Ph.D Student Education of China(20020613001)the Foundation of the Author of National Excellent Doctoral Dissertation of China(2000048,2002048)
文摘The effect of rail corrugation on the vertical dynamics of railway vehicle coupled with a curved track is investigated in detail with a numerical method when a wheelset is steadily curving. In the calculation of rail corrugation we consider the combination of Kalkers rolling contact theory modified, a model of material loss on rail running surface, and a dynamics model of railway vehicle coupled with a curved track. In the establishment of the dynamic model, for simplicity, one fourth of the freight car without lateral motions, namely a wheelset and the equivalent one fourth freight car body above it, is considered. The Euler beam is used to model the rails and the track structure under the rails is replaced with equivalent springs, dampers and mass bodies. The numerical results show the great influence of the rail corrugation on the vibration of the parts of the vehicle and the track, and the some characters of rail corrugation in development.
基金Acknowledgement This research was supported by the National Natural Science Foundation of China （Grant No. 10732030） and the 111 Project （B07009）.
文摘We have examined the aerodynamic effects of corrugation in model wings that closely mimic the wing movements of a forward flight bumblebee using the method of computational fluid dynamics. Various corrugated wing models were tested （care was taken to ensure that the corrugation introduced zero camber）. Advance ratio ranging from 0 to 0.57 was considered. The results shown that at all flight speeds considered, the time courses of aerodynamic force of the corrugated wing are very close to those of the flat-plate wing. The cornlgation decreases aerodynamic force slightly. The changes in the mean location of center of pressure in the spanwise and chordwise directions resulting from the corrugation are no more than 3% of the wing chord length. The possible reason for the small aerodynamic effects of wing corrugation is that the wing operates at a large angle of attack and the flow is separated： the large angle of incidence dominates the corrugation in determining the flow around the wing, and for separated flow, the flow is much less sensitive to wing shape variation.
基金Supported by National Natural Science Foundation of China(Grant Nos.U1361117,51305360)PhD Programs Foundation of Ministry of Education of China(Grant No.20130184110005)+1 种基金Cultivation Program for the Excellent Doctoral Dissertation of Southwest Jiaotong UniversityGuangzhou Metro Corporation Program of China
文摘The current research of rail corrugation mainly focuses on the mechanisms of its formation and development. Compared with the root causes and development mechanisms, the wheel-rail impacts, the fatigue failure of vehicle-track parts, and the loss of ride comfort due to rail corrugation should also be taken into account. However, the influences of rail corrugation on vehicle and track vibration, and failure of vehicle and track structural parts are barely discussed in the literature. This paper presents an experimental and numerical investigation of the structural vibration of metro bogies caused by rail corrugation. Extensive experiments are conducted to investigate the effects of short-pitch rail corrugation on the vibration accelerations of metro bogies. A dynamic model of a metro vehicle coupled with a concrete track is established to study the influence of rail corrugation on the structural vibration of metro bogies. The field test results indicate that the short-pitch rail corrugation generates strong vibrations on the axle-boxes and the bogie frames, therefore, accelerates the fatigue failure of the bogie components. The numerical results show that short-pitch rail corrugation may largely reduce the fatigue life of the coil spring, and improving the damping value of the primary vertical dampers is likely to reduce the strong vibration induced by short-pitch rail corrugation. This research systematically studies the effect of rail corrugation on the vibration of metro bogies and proposes some remedies for mitigating strong vibrations of metro bogies and reducing the incidence of failure in primary coil springs, which would be helpful in developing new metro bogies and track maintenance procedures.
