Different rare earth substituted perovskites LaRExFe1-xO3(where RE=Eu3+,Gd3+,Dy3+,Nd3+and x=0.02,0.04,0.06,0.08,0.1)with orthorhombic structure and narrow band gaps were successfully fabricated via sol-gel autocombust...Different rare earth substituted perovskites LaRExFe1-xO3(where RE=Eu3+,Gd3+,Dy3+,Nd3+and x=0.02,0.04,0.06,0.08,0.1)with orthorhombic structure and narrow band gaps were successfully fabricated via sol-gel autocombustion method.All the substituted perovskites are found to exhibit excellent photocatalytic activity towards the oxidative degradation of dye molecules.An excellent increase in the rate constant values of pure perovskite(LaFeO3)photocatalytic reactions is observed with the substitution of rare earth metal ions.Best results are obtained for LaNd0.1Fe0.9O3 which exhibits around 7 times increase in the rate constant values for degradation reaction of SO(1.76×10-1 min-1)and RBY(1.69×10-1 min-1)dyes.展开更多
The purpose of this study was to prepare iron-based catalysts supported on silica by autocombustion method for directly using for Fischer-Tropsch synthesis（FTS） without a reduction step. The effect of different citr...The purpose of this study was to prepare iron-based catalysts supported on silica by autocombustion method for directly using for Fischer-Tropsch synthesis（FTS） without a reduction step. The effect of different citric acid（CA）：iron nitrate（N） molar ratios and acid types on the FTS performance of catalysts were investigated. The CA：N molar ratios had an important influence on the formation of iron active phases and FTS activity. The iron carbide（FexC）, which is known to be one of the iron active phases, was demonstrated by the X-ray diffraction and X-ray photoelectron spectroscopy. Increasing the CA：N molar ratios up to 0.1 increased CO conversion of catalyst to 86.5%, which was then decreased markedly at higher CA：N molar ratios. An excess of CA resulted in carbon residues covering the catalyst surface and declined FTS activity. The optimal catalyst（CA：N molar ratio = 0.1） achieved the highest CO conversion when compared with other autocombustion catalysts as well as reference catalyst prepared by impregnation method, followed by a reduction step. The autocombustion method had the advantage to synthesize more efficient catalysts without a reduction step. More interestingly, iron-based FTS catalysts need induction duration at the initial stage of FTS reaction even after reduction, because metallic iron species need time to be transformed to FexC. But here, even if without reduction, FexC was formed directly by autocombustion and induction period was eliminated during FTS reaction.展开更多
基金Project supported by Council of Scientific and Industrial Research(CSIR)((01(02833)/15/EMR-Ⅱ))DST Purse Grant-Ⅱand University Grants Commission(UGC)
文摘Different rare earth substituted perovskites LaRExFe1-xO3(where RE=Eu3+,Gd3+,Dy3+,Nd3+and x=0.02,0.04,0.06,0.08,0.1)with orthorhombic structure and narrow band gaps were successfully fabricated via sol-gel autocombustion method.All the substituted perovskites are found to exhibit excellent photocatalytic activity towards the oxidative degradation of dye molecules.An excellent increase in the rate constant values of pure perovskite(LaFeO3)photocatalytic reactions is observed with the substitution of rare earth metal ions.Best results are obtained for LaNd0.1Fe0.9O3 which exhibits around 7 times increase in the rate constant values for degradation reaction of SO(1.76×10-1 min-1)and RBY(1.69×10-1 min-1)dyes.
基金financial support to the Overseas Academic Presentation Scholarship for Graduate Students, Graduate School, Chulalongkorn University
文摘The purpose of this study was to prepare iron-based catalysts supported on silica by autocombustion method for directly using for Fischer-Tropsch synthesis（FTS） without a reduction step. The effect of different citric acid（CA）：iron nitrate（N） molar ratios and acid types on the FTS performance of catalysts were investigated. The CA：N molar ratios had an important influence on the formation of iron active phases and FTS activity. The iron carbide（FexC）, which is known to be one of the iron active phases, was demonstrated by the X-ray diffraction and X-ray photoelectron spectroscopy. Increasing the CA：N molar ratios up to 0.1 increased CO conversion of catalyst to 86.5%, which was then decreased markedly at higher CA：N molar ratios. An excess of CA resulted in carbon residues covering the catalyst surface and declined FTS activity. The optimal catalyst（CA：N molar ratio = 0.1） achieved the highest CO conversion when compared with other autocombustion catalysts as well as reference catalyst prepared by impregnation method, followed by a reduction step. The autocombustion method had the advantage to synthesize more efficient catalysts without a reduction step. More interestingly, iron-based FTS catalysts need induction duration at the initial stage of FTS reaction even after reduction, because metallic iron species need time to be transformed to FexC. But here, even if without reduction, FexC was formed directly by autocombustion and induction period was eliminated during FTS reaction.
