The aim of this research is to find substitute barrier materials for natural clay from two kinds of municipal sludge: waterworks sludge(S_w) and dredging sludge(S_d). Laboratory tests were performed firstly to determi...The aim of this research is to find substitute barrier materials for natural clay from two kinds of municipal sludge: waterworks sludge(S_w) and dredging sludge(S_d). Laboratory tests were performed firstly to determine their Atterberg limits and hydraulic conductivity. Based on the results, the use of waterworks sludge was recommended. Then, shear strength tests were performed and it was found the shear resistance property of waterworks sludge is strong enough to maintain slope stability. In order to evaluate the possibility of secondary pollution, the heavy metal contents of waterworks sludge was determined and the results indicated that secondary pollution is unlikely happened. Finally, economic analysis proves that reusing waterworks sludge as barrier will reduce the lost a great for both landfill and waterworks. Based on the results, waterworks sludge was proposed to use and a further long-term simulated landfill test was suggested.展开更多
Determining the physical and mechanical properties of soil and its behavior for engineering projects is essential for road construction operations. One of the most important principles in forest road construction, whi...Determining the physical and mechanical properties of soil and its behavior for engineering projects is essential for road construction operations. One of the most important principles in forest road construction, which is usually neglected, is to avoid mixing organic matter with road materials during excavation and embankment construction. The current study aimed to assess the influence of organic matter on the physical properties and mechanical behaviors of forest soil and to analyze the relation between the amount of organic matter and the behavior of forest soil as road material. A typical soil sample from the study area was collected beside a newly constructed roadbed. The soil was mixed with different percentages of organic matter（control treatment, 5, 10, and 15% by mass） and different tests including Atterberg limits, standard compaction, and California bearing ratio（CBR） tests were conducted on these different soil mixtures. The results showed that soil plasticity increased linearly with increasing organic matter.Increasing the organic matter from 0%（control） to 15%resulted in an increase of 11.64% of the plastic limit and 15.22% of the liquid limit after drying at 110 ℃. Also,increasing the organic matter content reduced the soil maximum dry density and increased the optimum moisture content. Increasing the organic matter from 0 to 15% resulted in an increase of 11.0% of the optimum moisture content and a decrease of 0.29 g/cm;of the maximum dry density. Organic matter decreased the CBR, which is used as the index of road strength. Adding 15% organic matter to the soil resulted in a decrease of the CBR from 15.72 to 4.75%. There was a significant difference between the two drying temperatures（60 and 110 ℃） for the same organic matter mixtures with lower water content values after drying at 60 ℃. The results revealed the adverse influence of organic matter on soil engineering properties and showed the importance of organic matter removal before excavation and fill construction.展开更多
A new approach is developed to determine the shear wave velocity in saturated soft to firm clays using measurements of the liquid limit, plastic limit, and natural water content with depth. The shear wave velocity is ...A new approach is developed to determine the shear wave velocity in saturated soft to firm clays using measurements of the liquid limit, plastic limit, and natural water content with depth. The shear wave velocity is assessed using the site-specific variation of the natural water content with the effective mean stress. Subsequently, an iterative process is envisaged to obtain the clay stiffness and strength parameters.The at-rest earth pressure coefficient, as well as bearing capacity factor and rigidity index related to the cone penetration test, is also acquired from the analyses. Comparisons are presented between the measured clay parameters and the results of corresponding analyses in five different case studies. It is demonstrated that the presented approach can provide acceptable estimates of saturated clay stiffness and strength parameters. One of the main privileges of the presented methodology is the site-specific procedure developed based on the relationships between clay strength and stiffness parameters, rather than adopting direct correlations. Despite of the utilized iterative processes, the presented approach can be easily implemented using a simple spreadsheet, benefiting both geotechnical researchers and practitioners.展开更多
In this paper, we compare different nanoclay-PEG composites and the influence of the input parameters especially the percentage of PEG and the clay size. Because of the facility of material elaboration, dried state wi...In this paper, we compare different nanoclay-PEG composites and the influence of the input parameters especially the percentage of PEG and the clay size. Because of the facility of material elaboration, dried state with grinding, we adopted a complete experiments plan to obtain a maximum of robustness of the responses. For each sample, we made an XRD analysis to see if we obtain the intercalation of the PEG 6000 (Polyethylene Glycol 6000) within the clay sheets. The characterization adopted consists on the measurement of the shrinking of some cylinders we made, the liquidity and plasticity limits according to the Casagrande protocol used in geotechnical clays characterizations. We utilize also the methylen blue protocol to estimate the variation of the specific surface of ionic exchange of the clay sheets according to the PEG 6000 percentage and the clay sizes. SEM microscopy permits to visualize some of the phases detected by the XRD analysis. The TEM microscopy permits also to see the amorphous phases created by the grinding protocol which affects significantly the specific surface and the shrinking of the new materials. For each section, we made some conclusions with interpretation in order to integrate these results in civil engineering, classical/artisanal material construction and geotechnical fields.展开更多
文摘The aim of this research is to find substitute barrier materials for natural clay from two kinds of municipal sludge: waterworks sludge(S_w) and dredging sludge(S_d). Laboratory tests were performed firstly to determine their Atterberg limits and hydraulic conductivity. Based on the results, the use of waterworks sludge was recommended. Then, shear strength tests were performed and it was found the shear resistance property of waterworks sludge is strong enough to maintain slope stability. In order to evaluate the possibility of secondary pollution, the heavy metal contents of waterworks sludge was determined and the results indicated that secondary pollution is unlikely happened. Finally, economic analysis proves that reusing waterworks sludge as barrier will reduce the lost a great for both landfill and waterworks. Based on the results, waterworks sludge was proposed to use and a further long-term simulated landfill test was suggested.
基金financially supported by the University of Tehran
文摘Determining the physical and mechanical properties of soil and its behavior for engineering projects is essential for road construction operations. One of the most important principles in forest road construction, which is usually neglected, is to avoid mixing organic matter with road materials during excavation and embankment construction. The current study aimed to assess the influence of organic matter on the physical properties and mechanical behaviors of forest soil and to analyze the relation between the amount of organic matter and the behavior of forest soil as road material. A typical soil sample from the study area was collected beside a newly constructed roadbed. The soil was mixed with different percentages of organic matter（control treatment, 5, 10, and 15% by mass） and different tests including Atterberg limits, standard compaction, and California bearing ratio（CBR） tests were conducted on these different soil mixtures. The results showed that soil plasticity increased linearly with increasing organic matter.Increasing the organic matter from 0%（control） to 15%resulted in an increase of 11.64% of the plastic limit and 15.22% of the liquid limit after drying at 110 ℃. Also,increasing the organic matter content reduced the soil maximum dry density and increased the optimum moisture content. Increasing the organic matter from 0 to 15% resulted in an increase of 11.0% of the optimum moisture content and a decrease of 0.29 g/cm;of the maximum dry density. Organic matter decreased the CBR, which is used as the index of road strength. Adding 15% organic matter to the soil resulted in a decrease of the CBR from 15.72 to 4.75%. There was a significant difference between the two drying temperatures（60 and 110 ℃） for the same organic matter mixtures with lower water content values after drying at 60 ℃. The results revealed the adverse influence of organic matter on soil engineering properties and showed the importance of organic matter removal before excavation and fill construction.
文摘A new approach is developed to determine the shear wave velocity in saturated soft to firm clays using measurements of the liquid limit, plastic limit, and natural water content with depth. The shear wave velocity is assessed using the site-specific variation of the natural water content with the effective mean stress. Subsequently, an iterative process is envisaged to obtain the clay stiffness and strength parameters.The at-rest earth pressure coefficient, as well as bearing capacity factor and rigidity index related to the cone penetration test, is also acquired from the analyses. Comparisons are presented between the measured clay parameters and the results of corresponding analyses in five different case studies. It is demonstrated that the presented approach can provide acceptable estimates of saturated clay stiffness and strength parameters. One of the main privileges of the presented methodology is the site-specific procedure developed based on the relationships between clay strength and stiffness parameters, rather than adopting direct correlations. Despite of the utilized iterative processes, the presented approach can be easily implemented using a simple spreadsheet, benefiting both geotechnical researchers and practitioners.
文摘In this paper, we compare different nanoclay-PEG composites and the influence of the input parameters especially the percentage of PEG and the clay size. Because of the facility of material elaboration, dried state with grinding, we adopted a complete experiments plan to obtain a maximum of robustness of the responses. For each sample, we made an XRD analysis to see if we obtain the intercalation of the PEG 6000 (Polyethylene Glycol 6000) within the clay sheets. The characterization adopted consists on the measurement of the shrinking of some cylinders we made, the liquidity and plasticity limits according to the Casagrande protocol used in geotechnical clays characterizations. We utilize also the methylen blue protocol to estimate the variation of the specific surface of ionic exchange of the clay sheets according to the PEG 6000 percentage and the clay sizes. SEM microscopy permits to visualize some of the phases detected by the XRD analysis. The TEM microscopy permits also to see the amorphous phases created by the grinding protocol which affects significantly the specific surface and the shrinking of the new materials. For each section, we made some conclusions with interpretation in order to integrate these results in civil engineering, classical/artisanal material construction and geotechnical fields.
