Optical beating is the usual approach to generation of microwave signals.However,the highest frequency achievable for microwave signals is limited by the bandwidths of optoelectronic devices.To maximize the microwave ...Optical beating is the usual approach to generation of microwave signals.However,the highest frequency achievable for microwave signals is limited by the bandwidths of optoelectronic devices.To maximize the microwave frequency with a limited bandwidth of a photodetector(PD)and relieve the bandwidth bottleneck,we propose to generate microwave signals with the single sideband(SSB)format by beating a continuous wave(CW)light with an optical SSB signal.By simply adjusting the frequency diference between the CW light and the carrier of the optical SSB signal,the frequency of the generated microwave SSB signal is changed correspondingly.In the experiment,amplitude shift keying(ASK)microwave signals with the SSB format are successfully generated with diferent carrier frequencies and coding bit rates,and the recovered coding information agrees well with the original pseudo random binary sequence(PRBS)of 2^(7)−1 bits.The proposed approach can signifcantly relieve the bandwidth restriction set by optoelectronic devices in high-speed microwave communication systems.展开更多
In order to search for the seismic wave characteristics of low frequency signals in the Alxa Left Banner region,Inner Mongolia,the low frequency signals of seismic wave data are extracted from the earthquakes of MS5. ...In order to search for the seismic wave characteristics of low frequency signals in the Alxa Left Banner region,Inner Mongolia,the low frequency signals of seismic wave data are extracted from the earthquakes of MS5. 8 in 2015 and MS5. 0 in 2016 in this area. The results show that:① Before the MS5. 8 earthquake,the seismic stations located near the epicenter in Wuhai,Dongshengmiao,and Shizuishan recorded seismic waves that showed the phenomenon of spectrum shift from high to low frequency.② The low frequency signals recorded by different stations have obvious difference.③ According to the data recorded by the station closest to the epicenter,low-frequency signals were recorded about120 hours before the earthquake and had obvious anomalies. This may reflect slow slip before the earthquake.展开更多
This paper proposes a new structure to lower the power consumption of a variable gain amplifier（VGA） and keep the linearity of the VGA unchanged.The structure is used in a high rate amplitude-shift keying（ASK） bas...This paper proposes a new structure to lower the power consumption of a variable gain amplifier（VGA） and keep the linearity of the VGA unchanged.The structure is used in a high rate amplitude-shift keying（ASK） based IF-stage.It includes an automatic gain control（AGC） loop and ASK demodulator.The AGC mainly consists of sixstage VGAs.The IF-stage is realized in 0.18μm CMOS technology.The measurement results show that the power consumption of the whole system is very low.The system consumes 730μA while operating at 1.8 V.The minimum ASK signal the system could detect is 0.7 mV（peak to peak amplitude）.展开更多
A cost-effective ultra-dense wavelength-division-multiplexed passive optical network(UD-WDM PON) with speed of 12.5 Gbit/s and channel spacing of 12.5 GHz is proposed and demonstrated. The distributed feedback(DFB) la...A cost-effective ultra-dense wavelength-division-multiplexed passive optical network(UD-WDM PON) with speed of 12.5 Gbit/s and channel spacing of 12.5 GHz is proposed and demonstrated. The distributed feedback(DFB) lasers modulated in 4-level pulse amplitude modulation(4-PAM) format are used for downstream links, and the reflective semiconductor optical amplifiers(RSOAs) together with an optical frequency comb modulated in quadrature phase shift keying(QPSK) format are used for upstream links. We can achieve the error-free transmission of the upstream signals with speed of 12.5 Gbit/s even after 20 km single-mode fiber(SMF). The power penalty obtained by using the frequency comb generator instead of a tunable laser is around 0.5 d B. By using 11 DFB lasers and a set of intensity and phase modulators, it is possible to provide the seed light for 297 optical network units(ONUs) within the C-band.展开更多
A 2.4GHz ASK transmitter suitable for a low power wireless capsule endoscope system is presented. A mixer-based frequency up-conversion transmitter architecture is employed to achieve a high data rate. A pseudodiffere...A 2.4GHz ASK transmitter suitable for a low power wireless capsule endoscope system is presented. A mixer-based frequency up-conversion transmitter architecture is employed to achieve a high data rate. A pseudodifferential stacked class-A power amplifier using the current reuse technique is proposed to save power. The transmitter mainly includes two parts： a 20MHz ASK modulator based on a constant amplitude phase lock loop （PLL） and a direct up-conversion RF circuit. This design, implemented in a TSMC 0.25μm CMOS process, achieves a - 23. 217dBm output power with a data rate of 1Mbps and dissipates 3.17mA of current with a single 2.5V power supply.展开更多
基金the National Natural Science Foundation of China(Grant No.61975249)the National Key Research and Development Program of China(Nos.2018YFB2201700 and 2018YFA0704403)the Program for HUST Academic Frontier Youth Team(No.2018QYTD08).
文摘Optical beating is the usual approach to generation of microwave signals.However,the highest frequency achievable for microwave signals is limited by the bandwidths of optoelectronic devices.To maximize the microwave frequency with a limited bandwidth of a photodetector(PD)and relieve the bandwidth bottleneck,we propose to generate microwave signals with the single sideband(SSB)format by beating a continuous wave(CW)light with an optical SSB signal.By simply adjusting the frequency diference between the CW light and the carrier of the optical SSB signal,the frequency of the generated microwave SSB signal is changed correspondingly.In the experiment,amplitude shift keying(ASK)microwave signals with the SSB format are successfully generated with diferent carrier frequencies and coding bit rates,and the recovered coding information agrees well with the original pseudo random binary sequence(PRBS)of 2^(7)−1 bits.The proposed approach can signifcantly relieve the bandwidth restriction set by optoelectronic devices in high-speed microwave communication systems.
基金the Major Scientific andTechnical Project of Department of Science and Technology,Inner Mongolia in 2016(Strong Earthquake Track in the Short Stage and Integration Innovation of Stereoscopic Observation Technology in Space and Ground)
文摘In order to search for the seismic wave characteristics of low frequency signals in the Alxa Left Banner region,Inner Mongolia,the low frequency signals of seismic wave data are extracted from the earthquakes of MS5. 8 in 2015 and MS5. 0 in 2016 in this area. The results show that:① Before the MS5. 8 earthquake,the seismic stations located near the epicenter in Wuhai,Dongshengmiao,and Shizuishan recorded seismic waves that showed the phenomenon of spectrum shift from high to low frequency.② The low frequency signals recorded by different stations have obvious difference.③ According to the data recorded by the station closest to the epicenter,low-frequency signals were recorded about120 hours before the earthquake and had obvious anomalies. This may reflect slow slip before the earthquake.
基金supported by the National High-Tech Research and Development Program of China(Nos.2008AA010703,2009AA011606)the National Natural Science Foundation of China(No.60976023)
文摘This paper proposes a new structure to lower the power consumption of a variable gain amplifier（VGA） and keep the linearity of the VGA unchanged.The structure is used in a high rate amplitude-shift keying（ASK） based IF-stage.It includes an automatic gain control（AGC） loop and ASK demodulator.The AGC mainly consists of sixstage VGAs.The IF-stage is realized in 0.18μm CMOS technology.The measurement results show that the power consumption of the whole system is very low.The system consumes 730μA while operating at 1.8 V.The minimum ASK signal the system could detect is 0.7 mV（peak to peak amplitude）.
基金supported by the National Natural Science Foundation of China(No.61475015)
文摘A cost-effective ultra-dense wavelength-division-multiplexed passive optical network(UD-WDM PON) with speed of 12.5 Gbit/s and channel spacing of 12.5 GHz is proposed and demonstrated. The distributed feedback(DFB) lasers modulated in 4-level pulse amplitude modulation(4-PAM) format are used for downstream links, and the reflective semiconductor optical amplifiers(RSOAs) together with an optical frequency comb modulated in quadrature phase shift keying(QPSK) format are used for upstream links. We can achieve the error-free transmission of the upstream signals with speed of 12.5 Gbit/s even after 20 km single-mode fiber(SMF). The power penalty obtained by using the frequency comb generator instead of a tunable laser is around 0.5 d B. By using 11 DFB lasers and a set of intensity and phase modulators, it is possible to provide the seed light for 297 optical network units(ONUs) within the C-band.
文摘A 2.4GHz ASK transmitter suitable for a low power wireless capsule endoscope system is presented. A mixer-based frequency up-conversion transmitter architecture is employed to achieve a high data rate. A pseudodifferential stacked class-A power amplifier using the current reuse technique is proposed to save power. The transmitter mainly includes two parts： a 20MHz ASK modulator based on a constant amplitude phase lock loop （PLL） and a direct up-conversion RF circuit. This design, implemented in a TSMC 0.25μm CMOS process, achieves a - 23. 217dBm output power with a data rate of 1Mbps and dissipates 3.17mA of current with a single 2.5V power supply.
