The oxidation of PM Cu 50Cr, MA Cu 40Cr and MS Cu 40Cr alloys at 800 ℃ in 0.1 MPa O 2 was studied. The most important difference of their oxidation behaviors is the formation of an exclusive chromia scale on the surf...The oxidation of PM Cu 50Cr, MA Cu 40Cr and MS Cu 40Cr alloys at 800 ℃ in 0.1 MPa O 2 was studied. The most important difference of their oxidation behaviors is the formation of an exclusive chromia scale on the surface of the MS Cu 40Cr alloy and a continuous chromia layer beneath an outer CuO layer corresponding MA Cu 40Cr alloy, while a complex scale composing of CuO, Cu 2O, Cu 2Cr 2O 4 and Cr 2O 3 formed on the PM Cu 50Cr alloy. This result implies that alloy microstructure affects their oxidation behaviors largely. Microcrystalline structure provides numerous diffusion paths for reactive component chromium, shorter diffusion distance and rapid dissolution of Cr riched second phase. All these favor the exclusive formation of the most stable oxide. [展开更多
The sintered W-15wt.%Cu alloys fabricated by mechanical alloying were re-sintered under pressure to increase the density and improve the properties of these alloys. The pressure was applied vertically along the axis o...The sintered W-15wt.%Cu alloys fabricated by mechanical alloying were re-sintered under pressure to increase the density and improve the properties of these alloys. The pressure was applied vertically along the axis of the sintered sample. Properties such as density, hardness, and bending strength were measured. The microstructures of the sintered bodies were observed. The results showed that the subsequent pressure sintering could increase the density of the sintered W-15wt.%Cu alloys. Their hardness, bending strength, and some other physical properties were also improved by this subsequent densification treatment.展开更多
Laser melting of aluminium alloy-AlSi10Mg has increasingly been used to create specialised products in various industrial applications, however, research on utilising laser melting of aluminium matrix composites in re...Laser melting of aluminium alloy-AlSi10Mg has increasingly been used to create specialised products in various industrial applications, however, research on utilising laser melting of aluminium matrix composites in replacing specialised parts have been slow on the uptake. This has been attributed to the complexity of the laser melting process, metal/ceramic feedstock for the process and the reaction of the feedstock material to the laser. Thus, an understanding of the process, material microstructure and mechanical properties is important for its adoption as a manufacturing route of aluminium metal matrix composites. The effects of several parameters of the laser melting process on the mechanical blended composite were thus investigated in this research. This included single track formations of the matrix alloy and the composite alloyed with 5% and 10% respectively for their reaction to laser melting and the fabrication of density blocks to investigate the relative density and porosity over different scan speeds. The results from these experiments were utilised in determining a process window in fabricating near-fully dense parts.展开更多
Corrosion behavior of two nanocrystalline bulk Ag–50Cu alloys and one coarse-grained counterpart prepared by liquid-phase reduction(LPR), mechanical alloying(MA) and powder metallurgy(PM) methods,respectively, were i...Corrosion behavior of two nanocrystalline bulk Ag–50Cu alloys and one coarse-grained counterpart prepared by liquid-phase reduction(LPR), mechanical alloying(MA) and powder metallurgy(PM) methods,respectively, were investigated in Na Cl solutions. They were finished by means of PARM273 A and M5210 electrochemical apparatus through potentiodynamic polarization method and electrochemical impedance spectroscopy(EIS) technique. The results show that corrosion rates of three Ag–50Cu alloys increase with the increment of Na Cl solution concentrations. Corrosion rates of LPRAg–50Cu alloy are a little higher than those of PMAg–50Cu alloy,but evidently lower than those of MAAg–50Cu alloy. The difference in corrosion rates is attributed to the large reduction in the grain size and homogeneous microstructure of nanocrystalline alloys. Passive current densities decrease and afterward increase for PMAg–50Cu alloy,decrease for MAAg–50Cu alloy, and increase for LPRAg–50Cu alloy with the increment of Na Cl solution concentrations. After the grain sizes are refined, passive current densities become lower.展开更多
文摘The oxidation of PM Cu 50Cr, MA Cu 40Cr and MS Cu 40Cr alloys at 800 ℃ in 0.1 MPa O 2 was studied. The most important difference of their oxidation behaviors is the formation of an exclusive chromia scale on the surface of the MS Cu 40Cr alloy and a continuous chromia layer beneath an outer CuO layer corresponding MA Cu 40Cr alloy, while a complex scale composing of CuO, Cu 2O, Cu 2Cr 2O 4 and Cr 2O 3 formed on the PM Cu 50Cr alloy. This result implies that alloy microstructure affects their oxidation behaviors largely. Microcrystalline structure provides numerous diffusion paths for reactive component chromium, shorter diffusion distance and rapid dissolution of Cr riched second phase. All these favor the exclusive formation of the most stable oxide. [
基金This work was financially supported by the National Natural Science Foundation of China (No. 50174007)
文摘The sintered W-15wt.%Cu alloys fabricated by mechanical alloying were re-sintered under pressure to increase the density and improve the properties of these alloys. The pressure was applied vertically along the axis of the sintered sample. Properties such as density, hardness, and bending strength were measured. The microstructures of the sintered bodies were observed. The results showed that the subsequent pressure sintering could increase the density of the sintered W-15wt.%Cu alloys. Their hardness, bending strength, and some other physical properties were also improved by this subsequent densification treatment.
文摘Laser melting of aluminium alloy-AlSi10Mg has increasingly been used to create specialised products in various industrial applications, however, research on utilising laser melting of aluminium matrix composites in replacing specialised parts have been slow on the uptake. This has been attributed to the complexity of the laser melting process, metal/ceramic feedstock for the process and the reaction of the feedstock material to the laser. Thus, an understanding of the process, material microstructure and mechanical properties is important for its adoption as a manufacturing route of aluminium metal matrix composites. The effects of several parameters of the laser melting process on the mechanical blended composite were thus investigated in this research. This included single track formations of the matrix alloy and the composite alloyed with 5% and 10% respectively for their reaction to laser melting and the fabrication of density blocks to investigate the relative density and porosity over different scan speeds. The results from these experiments were utilised in determining a process window in fabricating near-fully dense parts.
基金financially supported by the National Natural Science Foundation of China (Nos. 51271127 and 51501118)
文摘Corrosion behavior of two nanocrystalline bulk Ag–50Cu alloys and one coarse-grained counterpart prepared by liquid-phase reduction(LPR), mechanical alloying(MA) and powder metallurgy(PM) methods,respectively, were investigated in Na Cl solutions. They were finished by means of PARM273 A and M5210 electrochemical apparatus through potentiodynamic polarization method and electrochemical impedance spectroscopy(EIS) technique. The results show that corrosion rates of three Ag–50Cu alloys increase with the increment of Na Cl solution concentrations. Corrosion rates of LPRAg–50Cu alloy are a little higher than those of PMAg–50Cu alloy,but evidently lower than those of MAAg–50Cu alloy. The difference in corrosion rates is attributed to the large reduction in the grain size and homogeneous microstructure of nanocrystalline alloys. Passive current densities decrease and afterward increase for PMAg–50Cu alloy,decrease for MAAg–50Cu alloy, and increase for LPRAg–50Cu alloy with the increment of Na Cl solution concentrations. After the grain sizes are refined, passive current densities become lower.
