The trade-off relation between the strength and the electrical conductivity has been a Iong-standing dilemma in metallic materials. In the study, three key principles, i.e.elongated grains, sharp texture and nano-scal...The trade-off relation between the strength and the electrical conductivity has been a Iong-standing dilemma in metallic materials. In the study, three key principles, i.e.elongated grains, sharp texture and nano-scale precipitates, were presented for preparing Al wire with high strength and high electrical conductivity based on the specially designed experiments for breaking the mutually exclusive relation between the strength and the electrical conductivity. The results show that the elongated grains could lead to a higher electrical conductivity in Al wire without sacrificing the strength;while, the <111> sharp texture can efficiently strengthen the Al wire without influencing the electrical conductivity. Furthermore, nano-scale precipitates with proper size can simultaneously improve the strength and electrical conductivity of Al alloy wire. Under the guidance of the above three key principles, Al wires with high strength and high conductivity were prepared.展开更多
Cored wires for electric arc spraying of Al/Al 2 O 3 MMC coatings were developed, with Al 2 O 3 powder as the core material and commercial aluminium strip as the retaining sheath. The bond strength, ...Cored wires for electric arc spraying of Al/Al 2 O 3 MMC coatings were developed, with Al 2 O 3 powder as the core material and commercial aluminium strip as the retaining sheath. The bond strength, Al 2 O 3 content, microstructure, micro-hardness and wear resistance of coatings produced by arc spraying of the cored wires were experimentally investigated and were compared with those of pure aluminum coating.展开更多
Components of Ti and Al dissimilar alloys were obtained by wire and arc additive manufacturing using two cold metal transfer(CMT)modes.Direct current CMT(DC-CMT)mode was used for Ti alloy deposition,and DC-CMT or CMT ...Components of Ti and Al dissimilar alloys were obtained by wire and arc additive manufacturing using two cold metal transfer(CMT)modes.Direct current CMT(DC-CMT)mode was used for Ti alloy deposition,and DC-CMT or CMT plus pulse(CMT+P)mode was used for the Al alloy deposition.During deposition of the first Al alloy layer,little and a significant amount of Ti alloy were melted using DC-CMT and CMT+P mode,respectively.TiAl_(3)formed in the reaction layer when DC-CMT mode was used,while TiAl_(3),TiAl,and Ti3Al formed in the reaction layer when CMT+P mode was used.Compared to using DC-CMT mode,more cracks occurred when using CMT+P.The nanohardness of the reaction layer was between that of the Al and Ti alloys,irrespective of the CMT modes.The average tensile strengths of the samples using DC-CMT and CMT+P mode were 108 MPa and 24 MPa,respectively.DC-CMT mode was more suitable for the wire and arc additive manufacturing of Ti/Al dissimilar alloys.展开更多
The underwater electrical explosion of an aluminum wire is influenced by many factors, such as wire parameters, pulsed power energy, etc. In this paper, underwater electrical explosion of an aluminum wire was investig...The underwater electrical explosion of an aluminum wire is influenced by many factors, such as wire parameters, pulsed power energy, etc. In this paper, underwater electrical explosion of an aluminum wire was investigated with pulsed voltage in the time scale of a few microseconds. A self-integrated Rogowski coil and a voltage divider were used for the measurements of current and voltage at the wire load, respectively. The deposited energy before breakdown was calculated based on experimental waveforms of current and voltage by mathematical method. Effects of the applied voltage, circuit inductance and sion and energy deposition were analyzed by means parameters of Al wire on the electrical exploof experiments and calculation. The results show that the current rise rate has an important influence on explosion process, such as the energy deposition before breakdown, the electrical power as well as the various explosion stages. A higher current rise rate can be achieved by increasing applied voltage and decreasing circuit inductance. The inhomogeneity of the energy deposition will result in prematured breakdown as well as lowered energy deposition, making the explosion process of wire more complicated.展开更多
Most hulls of the ships are protected with paintings, sacrificial anode, and impressed current cathodic protection methods against corrosion problems. However, these conventional methods are not very effective because...Most hulls of the ships are protected with paintings, sacrificial anode, and impressed current cathodic protection methods against corrosion problems. However, these conventional methods are not very effective because the rudder of ships stern are exposed to very severe corrosive environment such as tides, speeds of ships, cavitations and erosion corrosion. The environmental factors such as cavitation and corrosion will cause damage for materials with the shock wave by the creation and destruction of bubble. To solve these problems, the cavitation and electrochemical experiments are executed for thermal spray coating with Al-Zn alloy wire material. Thereafter, and sealed specimens with F-Si sealer on Al-Zn alloy coated specimen are executed to improve electrochemical and anti-cavitation characteristics in sea water. The application of fluorine silicon sealing after spray coating of 15%Al-85%Zn seems to be appropriate not only in static environment but also in dynamic environment.展开更多
The effect of different regimes of heat treatment on the tensile strength of SiC coated composite of C fibers reinforced Al wires has been investigated.Their tensile strength may increase under treatment either at 500...The effect of different regimes of heat treatment on the tensile strength of SiC coated composite of C fibers reinforced Al wires has been investigated.Their tensile strength may increase under treatment either at 500℃ for 2h or 550℃ for 1h,but decrease over 600℃.After the strength tests of extracted fibers from composite wires,the SiC coating is an excellent protection to C fibers.EPMA and EDAX showed that the C/Al interface of the composite wires is stable under treatment below 600℃,but unstable at 650℃展开更多
基金financially supported by the State Grid Corporation of China (No. 52110416001z)the National Natural Science Foundation of China (No. 51331007)
文摘The trade-off relation between the strength and the electrical conductivity has been a Iong-standing dilemma in metallic materials. In the study, three key principles, i.e.elongated grains, sharp texture and nano-scale precipitates, were presented for preparing Al wire with high strength and high electrical conductivity based on the specially designed experiments for breaking the mutually exclusive relation between the strength and the electrical conductivity. The results show that the elongated grains could lead to a higher electrical conductivity in Al wire without sacrificing the strength;while, the <111> sharp texture can efficiently strengthen the Al wire without influencing the electrical conductivity. Furthermore, nano-scale precipitates with proper size can simultaneously improve the strength and electrical conductivity of Al alloy wire. Under the guidance of the above three key principles, Al wires with high strength and high conductivity were prepared.
文摘Cored wires for electric arc spraying of Al/Al 2 O 3 MMC coatings were developed, with Al 2 O 3 powder as the core material and commercial aluminium strip as the retaining sheath. The bond strength, Al 2 O 3 content, microstructure, micro-hardness and wear resistance of coatings produced by arc spraying of the cored wires were experimentally investigated and were compared with those of pure aluminum coating.
基金National Natural Science Foundation of China(grant number 52075377 and 51575381)Tianjin Research Program of Application Foundation and Advanced Technology(grant number 15JCZDJC38600)supported by the China Scholarship Council(No.201706255090 and No.201806250043)。
文摘Components of Ti and Al dissimilar alloys were obtained by wire and arc additive manufacturing using two cold metal transfer(CMT)modes.Direct current CMT(DC-CMT)mode was used for Ti alloy deposition,and DC-CMT or CMT plus pulse(CMT+P)mode was used for the Al alloy deposition.During deposition of the first Al alloy layer,little and a significant amount of Ti alloy were melted using DC-CMT and CMT+P mode,respectively.TiAl_(3)formed in the reaction layer when DC-CMT mode was used,while TiAl_(3),TiAl,and Ti3Al formed in the reaction layer when CMT+P mode was used.Compared to using DC-CMT mode,more cracks occurred when using CMT+P.The nanohardness of the reaction layer was between that of the Al and Ti alloys,irrespective of the CMT modes.The average tensile strengths of the samples using DC-CMT and CMT+P mode were 108 MPa and 24 MPa,respectively.DC-CMT mode was more suitable for the wire and arc additive manufacturing of Ti/Al dissimilar alloys.
基金supported by the State Key Program of National Natural Science Foundation of China(No.50637010)
文摘The underwater electrical explosion of an aluminum wire is influenced by many factors, such as wire parameters, pulsed power energy, etc. In this paper, underwater electrical explosion of an aluminum wire was investigated with pulsed voltage in the time scale of a few microseconds. A self-integrated Rogowski coil and a voltage divider were used for the measurements of current and voltage at the wire load, respectively. The deposited energy before breakdown was calculated based on experimental waveforms of current and voltage by mathematical method. Effects of the applied voltage, circuit inductance and sion and energy deposition were analyzed by means parameters of Al wire on the electrical exploof experiments and calculation. The results show that the current rise rate has an important influence on explosion process, such as the energy deposition before breakdown, the electrical power as well as the various explosion stages. A higher current rise rate can be achieved by increasing applied voltage and decreasing circuit inductance. The inhomogeneity of the energy deposition will result in prematured breakdown as well as lowered energy deposition, making the explosion process of wire more complicated.
文摘Most hulls of the ships are protected with paintings, sacrificial anode, and impressed current cathodic protection methods against corrosion problems. However, these conventional methods are not very effective because the rudder of ships stern are exposed to very severe corrosive environment such as tides, speeds of ships, cavitations and erosion corrosion. The environmental factors such as cavitation and corrosion will cause damage for materials with the shock wave by the creation and destruction of bubble. To solve these problems, the cavitation and electrochemical experiments are executed for thermal spray coating with Al-Zn alloy wire material. Thereafter, and sealed specimens with F-Si sealer on Al-Zn alloy coated specimen are executed to improve electrochemical and anti-cavitation characteristics in sea water. The application of fluorine silicon sealing after spray coating of 15%Al-85%Zn seems to be appropriate not only in static environment but also in dynamic environment.
文摘The effect of different regimes of heat treatment on the tensile strength of SiC coated composite of C fibers reinforced Al wires has been investigated.Their tensile strength may increase under treatment either at 500℃ for 2h or 550℃ for 1h,but decrease over 600℃.After the strength tests of extracted fibers from composite wires,the SiC coating is an excellent protection to C fibers.EPMA and EDAX showed that the C/Al interface of the composite wires is stable under treatment below 600℃,but unstable at 650℃
