Nanometer aluminum nitride powder with purity higher than 98wt% and diameter in the range of 5-80nm has been obtained by microwave heating using α-Al2O3、Al(OH)3、 colloidal Al(OH)3 as the source for aluminum, and ph...Nanometer aluminum nitride powder with purity higher than 98wt% and diameter in the range of 5-80nm has been obtained by microwave heating using α-Al2O3、Al(OH)3、 colloidal Al(OH)3 as the source for aluminum, and phenolformaldehyde resin, char, nanometer carbon black powder as the source for carbon, respectively. The effect of the type of starting materials and synthesis conditions on the purity and the size of the nanometer AlN powder has been analyzed in this paper.展开更多
Magnesium matrix composites reinforced with AlN particles were fabricated by the powder metallurgy technique. The evolution of lattice constants and solid solubility levels of Al in α-Mg and the microstructure of Mg-...Magnesium matrix composites reinforced with AlN particles were fabricated by the powder metallurgy technique. The evolution of lattice constants and solid solubility levels of Al in α-Mg and the microstructure of Mg-Al/AlN composites were investigated in the present study. The results showed that the solid solubility of Al in α-Mg reached a relatively high level by the P/M process with a long time of milling. X-ray diffraction showed that the peaks of Mg phase clearly shifted to higher angles. The lattice constants and cell volume decreased significantly compared with those of standard Mg due to a significant amount of Al incorporated into α-Mg in the form of substitutional solid solution. The degree of lattice deformation decreased at a low sintering temperature and increased at higher sintering temperatures due to the presence of AlN. Microstructural characterization of the composites revealed a necklace distribution of AlN particles in the Mg matrix. Heat treatment led to precipitation of Mg17Al12 from the supersaturated α-Mg solid solution. The pre- cipitate exhibited granular and lath-shaped morphologies in Mg matrix and ftocculent precipitation around AlN particles.展开更多
The effects of two different heat-treatment atmospheres,nitrogen atmosphere and reducing nitrogen atmosphere with carbon,on the properties of Y2O3-doped aluminum nitride（AlN） ceramics were investigated.The AlN powde...The effects of two different heat-treatment atmospheres,nitrogen atmosphere and reducing nitrogen atmosphere with carbon,on the properties of Y2O3-doped aluminum nitride（AlN） ceramics were investigated.The AlN powder as a raw material was synthesized by self-propagating high-temperature synthesis（SHS） and compacts were fabricated by employing powder injection molding technique.The polymer-wax binder consisted of 60 wt.% paraffin wax（PW）,35 wt.% polypropylene（PP）,and 5 wt.% stearic acid（SA）.After the removal of binder,specimens were sintered at 1850°С in nitrogen atmosphere under atmospheric pressure.To improve the thermal conductivity,sintered samples were reheated.The result reveals that the heat-treatment atmosphere has significant effect on the properties and secondary phase of AlN ceramics.The thermal conductivity and density of AlN ceramics reheated in nitrogen gas are 180 W·m^-1·K^-1 and 3.28 g·cm^-3 and the secondary phase is yttrium aluminate.For the sample reheated in reducing nitrogen atmosphere with carbon,the thermal conductivity and density are 173 W·m^-1·K^-1 and 3.23 g·cm^-3,respectively,and the secondary phase is YN.展开更多
文摘Nanometer aluminum nitride powder with purity higher than 98wt% and diameter in the range of 5-80nm has been obtained by microwave heating using α-Al2O3、Al(OH)3、 colloidal Al(OH)3 as the source for aluminum, and phenolformaldehyde resin, char, nanometer carbon black powder as the source for carbon, respectively. The effect of the type of starting materials and synthesis conditions on the purity and the size of the nanometer AlN powder has been analyzed in this paper.
文摘Magnesium matrix composites reinforced with AlN particles were fabricated by the powder metallurgy technique. The evolution of lattice constants and solid solubility levels of Al in α-Mg and the microstructure of Mg-Al/AlN composites were investigated in the present study. The results showed that the solid solubility of Al in α-Mg reached a relatively high level by the P/M process with a long time of milling. X-ray diffraction showed that the peaks of Mg phase clearly shifted to higher angles. The lattice constants and cell volume decreased significantly compared with those of standard Mg due to a significant amount of Al incorporated into α-Mg in the form of substitutional solid solution. The degree of lattice deformation decreased at a low sintering temperature and increased at higher sintering temperatures due to the presence of AlN. Microstructural characterization of the composites revealed a necklace distribution of AlN particles in the Mg matrix. Heat treatment led to precipitation of Mg17Al12 from the supersaturated α-Mg solid solution. The pre- cipitate exhibited granular and lath-shaped morphologies in Mg matrix and ftocculent precipitation around AlN particles.
基金supported by the National Natural Science Foundation of China(Nos.50025412 and 60576011)the National Key Basic Research and Development Program of China(No.TG2000067203).
文摘The effects of two different heat-treatment atmospheres,nitrogen atmosphere and reducing nitrogen atmosphere with carbon,on the properties of Y2O3-doped aluminum nitride（AlN） ceramics were investigated.The AlN powder as a raw material was synthesized by self-propagating high-temperature synthesis（SHS） and compacts were fabricated by employing powder injection molding technique.The polymer-wax binder consisted of 60 wt.% paraffin wax（PW）,35 wt.% polypropylene（PP）,and 5 wt.% stearic acid（SA）.After the removal of binder,specimens were sintered at 1850°С in nitrogen atmosphere under atmospheric pressure.To improve the thermal conductivity,sintered samples were reheated.The result reveals that the heat-treatment atmosphere has significant effect on the properties and secondary phase of AlN ceramics.The thermal conductivity and density of AlN ceramics reheated in nitrogen gas are 180 W·m^-1·K^-1 and 3.28 g·cm^-3 and the secondary phase is yttrium aluminate.For the sample reheated in reducing nitrogen atmosphere with carbon,the thermal conductivity and density are 173 W·m^-1·K^-1 and 3.23 g·cm^-3,respectively,and the secondary phase is YN.
